similar to: is gatekeeper required?

i cannot see caller ID of the call originated from outside zap channel. i hv configured both zapata.conf and extensions.conf. i m right now in india i think asterisk only supports Bellcore enable caller ID. so is it the same bug of BT caller ID problem in UK? or it is the bug of my asterisk configuration? i hv enabled callerID from my TELCO. -------------- next part -------------- An HTML

Hi all, I have 'Voipac NetPhone 210' phone apparatus with

Hi, I have one Q: why doesn't work h-extension in macro? I want to setup fax macro, to send tif-file after fax channel hang-up, but h-extension doesn't work in macro, so I must put them to global context. But in this setup, exten => h,1,system(/var/lib/asterisk/bin/mailfax ${FAXFILE} ${EMAILADDR} "${CALLERIDNUM} ${CALLERIDNAME}") mailfax binary will be executed after any

I am experimenting with oh323 channels and h.323 gateways and a Cisco CallManager. I am not using a gatekeeper at this time. Is it possible to place calls coming into Asterisk from specific peers into specific contexts? In iax.conf eaxh peer has a context in which I can specify the context an inbound call will be placed in. I don't see anything like this in the oh323.conf file or the oh323

Hello, I think I have the same problem as Martin Bene mentioned in http://lists.digium.com/pipermail/asterisk-users/2004-January/034521.html Since I found no further information about this I'd like to ask wether you know what the reason for this problem is and how one can get around this. * is registered to the innovaphone gatekeeper. Trunk connection is done with an AVM-B1 and chan_capi.

Hi all is there any way how can I simulate PSTN tone on asterisk. I

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I

Hi, I'm trying to get h323 communication working between asterisk (0.7.1) and Innovaphone Gatekeeper + innovaphone phones. chan_323 installed OK with currently recommended pwlib_1.5.2 and openh323_1.12.2. Registration asterisk with the gatekeeper works OK, externsion for my test(sip) phone gets registered with gatekeeper. when establishing a call between a h323 phone and asterisk I run into

Hello I am a newbie to Asterisk. We have set up Asterisk on a PC with Redhat 9.0. We have installed H323 openphone on our PC's. We are wondering what a gatekeeper does. It seems we need one but what I have seen in this group is that a gatekeeper must be installed on another box on the network. As all our PC's on the network use Microsoft OS is there a free gatekeeper software for

Hi All; First of all, I am looking to have the H323 Gatekeeper service available at Asterisk, and really I do not know if 1.4 or 1.6 or 1.8 started implementing H323 gatekeeper functionality or not? Until 1.4.26.2 version, there is no h323 gatekeeper functionality. So, any implementation for this feature has been done in the other versions?

Hi all, i have tried to connect to a clarent gatekeeper. I have used both of h323 drivers chan_h323.so and chan_oh323.so. But no one can register to this gatekeeper. Our ip is activated on this gatekeeper. Maybe, i do wrong anything.... I have only set the "gatekeeper" option in the h323.conf or oh323.conf to the ip address from the gatekeeper. gatekeeper=x.x.x.x But no one of the

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

Hi, I want to configure * to use a gatekeeper for routing calls to H.323 endpoints. I imagine it will work like that: * (chan_h323) will query the gatekeeper where to terminate the dialed number and the gatekeeper will return the information for the h.323 gateway. after that chan_h323 will try to make the call to the gateway it has received from the gatekeeper. so instead of duplicating a

Hello all, Please forgive me if this sounds a little (or a lot) ignorant as I am very new to asterisk. Right now I have two pc's connected back to back through an E100 card running asterisk. I have openh323 running as well and I am able to route calls through the E1 line. Next up I would like to be able to register asterisk with a gatekeeper. On another computer is running openGK. Using

I'm trying to connect an Asterisk 1.6 to an Avaya with gatekeeper (CLAN). When chan_ooh323 first loads it tries to establish a connection with the gk but I it fails. I have the following extract from the ooh323 log. Can anyone give some insight? Thanks! MD 23:02:59:045 Sent GRQ message 23:02:59:045 GkClient Received RAS Message 23:02:59:045 Received RAS Message = { 23:02:59:045

Dear All, I have installed GNU gatekeeper in my machine. I tested the calls using gatekeeper successfully. Now I have tried to Disable the gatekeeper in oh323.conf file gatekeeper=DISABLE Now I have tried to call, but the connection is not established. I have got following warning message in console. " WARNING[8446]: chan_oh323.c:3555

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

I've read through the archives and have picked up that * does not need a gatekeeper to talk directly with an H323 handset to send and receive calls. I'm trying to go PSTN----*-----H323 and all the examples that I can find use a gatekeeper. Are there any examples or hints for doing it without the gatekeeper? many thanks in advance Brian

Hi all, Can someone share with me his experience in making asterisk-oh323 talk to quintum gateway without gatekeeper. My set up is QUINTUM GATEWAY ------IP----M ASTERISK (OH323) Both are gateways.. but I don't know what authentication I will set up in oh323.conf and how to set it up I will be glad if anyone can help Goksie

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =