similar to: Fedora FC2 and Zaptel (Torisa)

I go to my Zaptel 1.4.0 folder and run ./configure; make linux26; make install and I don't see any errors. This is out of my modprobe.conf: install tor2 /sbin/modprobe --ignore-install tor2 && /sbin/ztcfg install torisa /sbin/modprobe --ignore-install torisa && /sbin/ztcfg install wcusb /sbin/modprobe --ignore-install wcusb && /sbin/ztcfg install wcfxo

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

[root@asterisk zaptel]# modprobe ztdummy WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format WARNING: Error inserting zaptel (/lib/modules/2.6.5-1.315/misc/zaptel.ko): Invalid module format FATAL: Error inserting ztdummy (/lib/modules/2.6.5-1.315/misc/ztdummy.ko): Invalid module format FATAL: Error running install command for ztdummy [root@asterisk

i have error in install module of tor2. but it compile good. what happen ? ivr2:/usr/src/zaptel # make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

Here's a weird problem that I'm not quite sure how to resolve. Zaptel 1.2.10 compiles just fine with "make", but when "make install" is run, this happens: [ `id -u` = 0 ] && /sbin/depmod -a 2.6.17-10-generic || : [ -f /etc/zaptel.conf ] || install -D -m 644 zaptel.conf.sample /etc/zaptel.conf build_tools/genmodconf linux26 "" "tor2 torisa wcusb

Hi, i can't compile the latest svn update from zaptel: /lib/modules/2.6.14-1.1653_FC4smp/build make -C /lib/modules/2.6.14-1.1653_FC4smp/build SUBDIRS=/usr/src/zaptel modules make[1]: Entering directory `/usr/src/kernels/2.6.14-1.1653_FC4-smp-i686' CC [M] /usr/src/zaptel/zaptel.o /usr/src/zaptel/zaptel.c:6193:5: warning: "CONFIG_ZAPATA_DEBUG" is not defined

I've got a fresh FC2 install and I'm trying to get the symlinks right according to the /usr/src/zaptel/README.Linux26 instructions. I've created two symlinks: /usr/src/linux-2.6 -> /usr/src/linux-2.6.5-1.358 /lib/modules/linux-2.6 -> /lib/modules/2.6.7-1.494.2.2 When I do a "make linux26", I get a million warnings and errors with the result being: make[2]: ***

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

Hi, I'm installing * 1.4.9 and a couple questions have come up: 1) I read here<http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x>( http://www.voip-info.org/wiki/view/Asterisk+installation+for+CentOS+4.x) that if you are using E1 cards you need to install LIBPRI. I'm not using any cards on this system, so does that mean I don't need LIBPRI? Asterisk built

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

Hello, I'm running Fedora Core 3 with udev, and asterisk/zaptel/libpri from cvs. I have followed the README.udev instructions replacing insmod with modprobe and rmmod with modprobe -r and adding the 60-zaptel.rules file, yet no matter what I do I still get this error on boot(or when I run service zaptel restart): [root@pbx ~]# /etc/init.d/zaptel restart Unloading zaptel hardware drivers:

I just received my dev kit and installed the hardware. I followed the directions Digium sends out to the letter and when I ran modprobe tor2 I got the following error: /lib/modules/2.4.18-19.7.x/misc/tor2.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters. You may find more information in syslog or the

Hi list, I have a asterisk box with an E400P that was running ok until last week. The machine just stop responding and after a reboot, the module (tor2) doesn't load anymore. anyone could help? regards Eduardo modprobe returns this: asterix:~# modprobe tor2 Zapata Telephony Interface Registered on major 196 Detected Tormenta 2 Quad T1/PRI or E1/PRA at 0xfe121800/0xfe121000 irq 7

Hello guys! I hope you bare with yet another newbie on the list! :-) I am trying to setup an asterisk installation in between a Siemens HiPath 3800 and my local carrier (Telefonica/Brazil). Both running R2. ISDN is not an option on the carrier. :-( I could apparently setup both E1s just fine according to zttool (both OK with no alarms) but, and this is where it starts to get

Hi guys, Thanks for your answers on my two questions yesterday. That's exactly what I was looking for, sorry for not noticing it myself, but I'm still getting acclimated to Asterisk and even Linux--from what I see so far, I love it. I've got another one now. Since my Asterisk install and configuration is fairly stable at this point, I'm interested it ensuring that during

Hi all... I did some Google searches and didn't find any info on this so I'm posting it here... if this was recently discussed, I apologize for the duplication -- please point me to the appropriate thread. System Description: Supermicro SuperServer 5015M-MF w/ PDSMi Motherboard Intel Pentium 4 2.8 Ghz CPU 2 GB DDR2 Memory Digium T400P 4 Port T1 Card CentOS 5.1 (Final) Kernel:

Are the RPMs for the latest GFS kernel module GFS-kernel-2.6.9-72.2.0.8 to be used with the version 2.6.9-55.0.9.EL available ? I tried to compile the Source RPMs available from the Red Hat site but the modules can't be loaded because of invalid module format arising from version magic issues. The syslog shows: node0 kernel: gfs: version magic '2.6.9-55.0.9.ELsmp SMP 686 REGPARM

Hi All, Newby with problem when attempting to make Zaptel on Red Hat linux 9.0. I have seached Google, VoIP forums etc and cannot resolve issue. (Red Hat 9.0) Linux version 2.4.20-31.9 (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Tue Apr 13 18:04:23 EDT 2004 All Packages installed per: http://www.voip-info.org/wiki-Asterisk+redhat9+packages Per

Hi, I have just begun working with TDMoE running between 2 fiber nics the dynamic span works great. In my main asterisk box's startup file I just 'modprobe tor2', then start asterisk. The zaptel, ztdynamic & ztd-eth modules all load by themselves when tor2 is loaded. If I stop asterisk then 'modprobe -r tor2' the tor2 module is removed but the other three remain. If I