similar to: Voicepulse problems?

I attempted to install an X100P card but it was not correctly recognized by my Redhat 9 install. I had a test install running without any cards which was working great minus the outward dialing since no cards existed. Now that I have a card, I want to add it to the system. Do I have to scratch the whole current install in order to get the X100P running on my system or is there a way to get it

All, I have been thru the archives and all the relevant URL's sent to me. I have sent e-mail to those who have gone before me and are attempting to accomplish the same goal - no one has it working?. Doesn't anyone have a WORKING asterisk pbx that hooks into vonage? Thanks, Jerry Roy 562-305-9545 -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have been picking at Asterisk for about a week, and I think I'm close. I was hoping for a little guidance to bring this on home. I want to be able to make outgoing calls from my SJPhone clients using my VoicePulse Connect account. I have the two requisite items from Voice Pulse, but I've had no luck successfully integrating the VoicePulse settings into iax.conf. My current config:

I have a DID with VoicePulse Connect, but the sound quality is horrible, it is often choppy and the caller's voice cuts out for 2-3 seconds at least once a minute, I have contacted VoicePulse many times, and they do not do anything about it! Does anyone have any similar problems? It isnt my Asterisk config because I have 0 problems using NuFone.

Skipped content of type multipart/mixed-------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 252 bytes Desc: OpenPGP digital signature Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040920/0629df7b/signature-0001.pgp

I have just installed * (RH9, P4 3.0GHZ, 1G RAM) in a small office, using three TDM400's with 4 FXO's each for incoming calls. Outgoing calls are (for the moment) routed via VoicePulse. Phone sets are Cisco 7940G's using SIP. I'm getting intermittent echo on outgoing calls, and my understanding, based on reviewing the wiki and several posts here, is this: >>>> The

I am wondering if there is a way to create a SIP/IAX group of outgoing lines like Zap groups. I am currently using the following method, but would like to use features such as ?g2? that would list all the accounts for a SIP or IAX connection. exten => _1NXXNXXXXXX,1,Dial(SIP/account_name:Password@gw5.voicepulse.com/${EXTEN }) exten =>

Greetings, I am trying to implement distinctive ringing on a Cisco 7960. I have tried setting alert_info to chirp1 or chirp2 before dialing the phone, but it has no affect. If you have successfully implemented distinctive ringing on a 7960, I would really appreciate seeing the snipit of code that works. Thanks in advance Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775)

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN} Well,

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

I'm a bit displeased at the way this happened. I received an email from VoicePulse. Here's some excerpts: ------------------ >We're sending you this important update so you can take advantage of improvements we've >been making to your VoicePulse Connect! service. >We've been working hard on improving the audio quality and reliability of your Connect! >service,

I have a problem that is almost certainly nat-related, but I can't figure out what's happening. Since moving the Sipura behind a NAT server (Linksys), I am no longer able to call between the two lines on the same Sipura. When I dial one extension from the other, it rings, but immediately after I pick up the ringing phone, the call is uncerimoniously dumped. I can tell the call

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

Hi all, I bought a couple phones for really cheap just for a simple solution. I'm trying to get a few 7910 to work with *. I'm just not sure how to get them to work. The 7910 just sits there "configuring IP" Here is a copy of my skinny.conf. the extensions.conf is default. I just want to bring the system up in default before a start making changes. Do I need to make

If you have a PRI terminated in a Cisco router talking SIP to * and would be willing to share your Cisco config, please respond. Also, I would be interested in knowing what version of IOS you are using. We are using an NM-HDV in a 3640. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

Asterisk apparently has five echo cancellation algorithms: STEVE, STEVE2, MARK, MARK2 and MARK3. The current default appears to be MARK2. My question is, has anyone had any experience with any of the others (other than MARK2), and is there some conventional wisdom as to when to use one over another? TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I am routing outgoing calls through a sip gateway. The calls go through no problem, however the ringing in the callers ear begins as soon as the last digit is dialed. This has two nasty side effects. First, the caller hears 1-2 more rings than the callee. Second, and more importantly, if the callee's line is busy, the caller continues to get hear ringing, even though the gateway has

Greetings, I tried to build astcc, but the Makefile is looking for Asterisk/AGI.pm. Anyone have any idea where this file is supposed to be and where it comes from? I've dragged in everything I can think of from cvs, and * is otherwise running fine. TIA Bruce Komito High Sierra Networks, Inc. www.servers-r-us.com (775) 236-5815

I've been using realtime to store my voicemail configuration in a mysql table for several months now, and have had no problems...until today. A few weeks ago, I upgraded to the latest CVS and today I noticed voicemail is not updating the password when the user changes it through option 0. I'm not sure when this started happening, but I assume it was sometime after I upgraded. Has anyone