similar to: Re: Invalid data ( 4 bytes at the end) message - g729codec

Hi all, I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3 and using nufone's h323 channel driver. I was using the old voiceage g729 and have replaced it with the digiums g729. I used to have the message "Measured length exceeds frame length" but since I changed the g729 codec I have not encountered this problem. However, another peculiar problem has cropped

Hi all, I am currently running asterisk (CVS HEAD) on a p4 machine with rh7.3 and using nufone's h323 channel driver. I was using the old voiceage g729 and have replaced it with the digiums g729. I used to have the message "Measured length exceeds frame length" but since I changed the g729 codec I have not encountered this problem. However, another peculiar problem has cropped

Hi guys, I got 2 licenses of g.729 and while running the asterisk with Monitor (for recording a channel) and using one channel for the call... I receive this error: WARNING[23826]: codec_g729.c:180 g729tolin_framein: Out of G.729 Decoder Licenses! many times.... it starts only when the call through the Zap channel takes place. while this error is being running on my screen I ran the cli command:

hi , when i am compiling Intel G729 codec with Patch, i got this error. but i followed all the instraction and successfully patch those file. i saw some has the same error before in this forum and they solved it. but i cant find the patch file they gave. can some one help me to fix this error? thanks atik In file included from ./vm/include/vm_types.h:17, from

Hello, I'm trying to find out if Asterisk will support plain G729 or G729b. I've read all over that it supports G729, but I can't seem to find any explicit remarks regarding the specific versions of the codec Asterisk will support. I noticed that Digium allows Asterisk users to register and download G729a, but refers to it as G729 on it's pages. I also noticed that on

Hi, i have a problem trying to register the codec G729, my licence is valid but when i try to Register i got the following error: "Registration unsuccessful... Error code: 110 ERROR! Your Internet connection is probably behind a proxy and the Registration program can't communicate with our server, however it has created the file: /var/lib/va-infoclient

I own a G729b codec from voiceage which I had from Digium a couple of months ago , I friend of mine had the new Digium G729 codec which registers in the asterisk as a Annex A/B codec, the problem that we saw is that the call goes thru find but we cannot here any sound. Asterisk is showing this : -- SIP/10.10.1.1-babc is ringing -- SIP/10.10.1.1-babc answered

Original Post ---------------- I have an Asterisk related problem with mutualphone. I can connect to any number with any softphone that I am using (iaxcomm, SJPhone, and a few others). Also I have a Grandstream BT 101. But I cannot call (via Asterisk) to mutualphone destinations. Other destinations go fine. A working phone call (e.g. from iaxcomm) gives the following on the console: --

Seeing that many people here hit problems with activating their G.729 licenses, I decided to post my opinion. I have purchased two G.729 licenses, for my private use. I did this even though VoiceAge makes G.729 free for private use, as Windows libraries. I guess a sufficiently motivated person could take the COFF libraries, run them through objcopy on cygwin (producing ELF .o files) and link them

According to digium's site, "Note: Please do not attempt to use the G.729 code in a SCSI-only system. We are currently working with VoiceAge to correct this issue." (found at http://www.digium.com/index.php?menu=asterisk_g729). Does anyone know what these issues are? Can anyone define SCSI-only system? I know this sounds kinda dumb, but I have a server with SCSI and IDE interfaces,

I've just setup a new asterisk server, and I need to have G.729 working on this system. The problem is I don't have any IDE drives (and therefore no /dev/hda etc), but only /dev/sda.   Is there really *no* way to license G.729 on a SCSI-only system? IMHO it's really stupid to replace an entire server because of a licensing issue. There *must* be a solution.   Anyone, please? Or at

I have multiple voiceage g729 licenses installed on a RH9 box, and have a remote C7960 configured to use it (low bandwidth). In calls like: Remote C7960 -> g729 -> asterisk -> g711 -> C7960 the audio is oftentimes rather choppy. Changing the remote 7960 to use g711 seems to eliminate/reduce the choppyness. Any ideas on what might be behind this?

Hi i have buy two license of G729 codec, but after run Registration program i notice this error Registration unsuccessful... Error code: 110 ERROR! Your Internet connection is probably behind a proxy and the Registration program can't communicate with our server, however it has created the file: /var/lib/va-infoclient which contains your machine signature and

Hello all, We have the following problem: When calling via iax, the sound is off after a while - most often after about 5 minutes (sometimes later or earlier) - at one end or at both ends. While the channel is up, and packages are still being transmitted, you just can't hear anything. Sometimes you can hear something just a little, but with the voice greatly distorted, sounding like a

Hi All, First of all, I'm sorry if my question is offtopic on this list. In such case please ignore this post and/or contact me directly. I'm asking my questions there because I feel you had similar problem before starting developing Speex. My story: my friend developed 3gpp content creator and he would distribute it in binary form. But there is problem with AMR licensing (the terms

Hi there, i had installed on all my servers the codec_g729b which is the old voiceage, so a month ago i updated the codec to codec_g729a. After that i started to get this message on my asterisk console: Dec 16 09:19:26 NOTICE[1288699200]: rtp.c:293 process_rfc3389: Don't know how to handle RFC3389 for receive codec 256 Dec 16 09:19:26 NOTICE[1288699200]: rtp.c:264 process_rfc3389: RFC3389

Hi! I?ve just discovered Speex, and sorry if this isn?t the right place to ask this, but I found no other mailing list (some projects have a "users" and a "developers" list separately, I guess this isn?t the case with Speex. If it is, please let me know). First, how I got here: 1. I?m looking for some low-bitrate codec to reduce the size of some very long (think 4-5+ hrs of

Hi there, im having some problems with my asterisk box, it seems codec is the principal cause of it. Reading in some forums i found that i can get the new codec_g729 from ftp://ftp.digium.com/pub/telephony/asterisk/g729/new_codec_binary/codec_g729b.so i checked it but the directory new_codec_binary doesnt exist. Anybody knows where can i found it?? Thanks for your help. Carlos Andres Medina

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hang on.... there's a non commercial G729 codec that will work with Asterisk? Can someone point me to where I can find it? Thanks, Doug. -----Original Message----- From: Francesco Peeters (Asterisk) [mailto:francesco@fampeeters.com] Sent: Sun 1/22/2006 8:27 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Cc: Asterisk Users Mailing List - Non-Commercial Discussion