similar to: PRI protocol question...

If you are looking for real high density VOIP termination I would look at > something like a Lucent APX 8000, configure correctly it can pass 2500+ > g.729 calls to the PSTN course we paid lots of $ for ours. > > Chris > Chris, My experience has been that the APX and TNT products require a single SIP proxy, how are you load balancing 2500 calls? If all of the traffic is

Hi list, For a client I am setting up a system which will use T1 PRI from Primus, who offer only NI-1 and NI-2 protocols for D-Channels. Previousely I have only used switchtypes euroISDN and National. Although the documentation says Asterisk does support NI-1 ans NI-2, but wanted to get your opinion if you have used these protocols on an Asterisk box and if there were any things to consider. If

Anyone using 5ess with success? I have a customer that wants to use it. Seems to WORK for a short time then there are errors on the D-channel and their side (nortel switch) shuts down the channel. They were saying something about a slip error. I dont know this term. I am using dahdi 2.1.0.4 and asterisk 1.4.22 and libpri 1.4.7 Any ideas? jerry

Hi, Is libpri rpm version 1.4.12 for CentOS 5.6 made available ? [root@ ~]# rpm -qa | grep libpri libpri-1.4.11.5-1_centos5 [root@ ~]# cat /etc/redhat-release CentOS release 5.6 (Final) [root@ ~]# [root@ ~]# yum list updates | grep libpri [root@ ~]# Please suggest/guide further. Regards, Kaushal

Hi, I am getting this message on the * console on my first pri span. Pri show span show it is down, and I can't make any calls from the span. Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27 07:40:23 NOTICE[23988]: chan_zap.c:8202 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Apr 27

We are in the process of installing a PRI line and we are going to connect it to an Asterisk Box. Verizon called us today to find out some information. I am surprised that they have never heard of Asterisk or Digium. But anyways, they needed some information in order to set up the circuit. Does the TE110P support NI1 or NI2? (I think the answer is both) What is the number of digits

Hi Guys, I have several * servers connected to T1 PRI's from various service providers in multiple locations the US. All the * servers use the same hardware with the same OS and * version. When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and populate into the * CDR fine. I connected to a DMS-500, NI2 (national) protocol and

I've been trying to look up information on upgrading firmware on a nortel i2004 ip phone. I have this phone leftover from a trial, and it's supposed to be upgradable to current firmwares. Since I also run a DMS I was able to login to nortel's site and get all the firmware files, but All the NTP's regarding firmware upgrading these are how to tell you BCM to send the file to it.

I currrently have Asterisk 1.2.8 with a TE110P Zaptel card tied to our Nortal DMS-10 switch via T1. This T1 trunk is configured for Feature Group D MF. The purpose of this is for LD delivery to a VoIP LD provider as a LD choice for our customers off of the DMS-10. When I sieze a channel on the zaptel, I get a spill of digits from the switch that is the called number, and I can see that in

Hi, I'm actually using a slightly old version of AAH with Asterisk 1.2.1, because at first install it was perfect for my moderate knowledge of Asterisk. It is working well but I gradually introduced many changes to dialplan during normal use and now I'm feeling like in a straitjacket! Moreover I'd like to have the chance to upgrade Asterisk regularly. I have not the experience to

Folks, I have a Merlin Legend R7 V10.0 with a 2 100D cards. I have 1 card in slot 4 going to CenturyTel, and the card in slot 10 going to a flip cable to a TE110P card in a Asterisk 1.6.x box. I have routing setup on the Merlin to send a block of numbers to the Asterisk. Currently the PSTN can dial the Asterisk Extensions. The Asterisk can dial Merlin Extensions. The Merlin can Dial Asterisk

How often do you guys see Event 6 and 8 on your PRI? (aka "HDLC Abort" and "HDLC Bad FCS") Is this normal? I would think not. bkw

Hi all, I need help. I have a Linux box with SER as a proxy server with ip phones attached on it , and another linux box with Asterisk and T410 card connect to an E1 line .Whenever there is a call from PSTN it is passed to Asterisk and then to SER box and then to the phone .every time an invalid number dialed from PSTN to SIP phones connected to SER asterisk says that the call is progressing

Hey all, It such a shame that BRI technology is such a flop in the USA. For a small office such as mine it would be a great product. So her goes my question.... What is a known asterisk working BRI card that will operate in the USA. I need to weigh price/quality. I need to do DID/DDI (or what ever you want to call it). Asterisk will do everything else I need. The ILEC has at the other

> -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Troy Settle > Sent: Wednesday, September 14, 2005 7:03 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] MAX PRI for single server (was:Not > enoughlinesavailable for Asterisk implemetation)

Hi Folks, I'm trying to send CallerID Name information out to the PSTN via a PRI with Bell Canada with no success. With inbound calls (originating from the PSTN) CNAM is received successfully, and we've not had any similar problems with other Telco PRIs, so I'm stumped.

Hi All, Sorry for the double post, but I'm in a real bind. I have several * servers connected to T1 PRI's from various service providers in multiple locations the US. All the * servers use the same hardware with the same OS and * version CVS-v1-0-11/09/04-12:27:27. When connected to 5ESS Switches, using the NI2 (national) PRI protocol, the CID name and number come across fine and

Hi List, Merlin Magix hardware v02 I'm trying to get asterisk to act as a voicemail server for a lucent merlin magix PBX that we purchased used. We have 4 FXO channels between the two PBXs on a Sangoma A200 card. The 770 dialgroup is working properly, in that calls to 770 are answered by Asterisk. The magix is sending mode codes in the format #XX#XXX#, where the 2nd block of digits

Hello, i have a fresh installed/compiled from source samba 4.11.2 on ubuntu 18.04. But samba wont start. Syslog output: Nov? 6 12:15:19 dms systemd[1]: Starting Samba4 smbd... Nov? 6 12:15:19 dms systemd[1]: Started Samba4 smbd. Nov? 6 12:15:19 dms smbd[1557]: [2019/11/06 12:15:19.594448,? 0] ../../source3/auth/auth_util.c:1385(make_new_session_info_guest) Nov? 6 12:15:19 dms smbd[1557]:??

We have just had an ISDN PRI service commissioned here in AU (using Powertel as provider). I have called them and ensured that we have the ability to set Caller ID on our service to any number in our 100 number block, and I have been assured that everything is OK from their end (unlikely). Every time I drop a sample.call in to /var/spool/asterisk/outgoing with the Callerid: option set, the