similar to: Get MWI from Telco's voicemail

I use a TDM400 card to interface with my telco. I used asterisk voice mail. However, if I'm on the telco line while another call comes in, obviously it cannot go to asterisk voice mail but instead bounces to the Telco voice mail. Is there any means by which I can get asterisk detect the Message Waiting Indicator (MWI) from the telco? Is there some application or variable which can be

I've upgraded to asterisk-1.6.0-beta2. I'm trying to get the new Telco MWI detection function working. It doesn't appear to be working. I have this in zapata.conf ; PSTN connected here ;immediate=no ;busydetect=yes ;busycount=8 ;musiconhold=default mwimonitor=yes ;mwilevel=512 mwimonitornotify=/usr/local/sbin/zapnotify.sh faxdetect=incoming signalling=fxs_ks context=incoming

I'm trying to get the Telco MWI recognition working in asterisk-1.6-beta7. I'm told that it's supposed to work provided my telco support FSK MWI signalling. I have Verzon FIOS. I believe I have FSK MWI signaling as I can hear the standard stutter tone when I pick up a live handset in front of my asterisk connection. I have the Verizon line attached to a TDM400 card, port 4. I

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

Folks, I've tried to find a reference, but I've had no luck, and would appreciate your thoughts: I'd like to be able to monitor a telco line for Message Waiting Notification, however I cannot figure out if this capability is available. Detecting either FSK or Stuttered Dial tone would serve, but I can't find anything in the list archives or Wiki with clues as to how this might

Here's a link to it: http://forums.digium.com/viewtopic.php?t=4363&highlight= Regards, Scott -----Original Message----- From: Scott Keagy Sent: Monday, December 04, 2006 5:05 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: RE: [asterisk-users] mwi for voicemail not showing up for realtimeconfig. A while back I posted a fully functional though somewhat elaborate

Hi - We've got multiple offices with their own asterisk boxes (CVS HEAD 11/03/04-14:59:37) connecting to each other using IAX forwards. All users are on SIP phones. Voicemail is centralized to one location. Everything is hunky dory except that the users in the remote offices don't get MWI on their phones. I've seen the other posts to this list regarding this, and

Dear List, I'm having a blinking MWI light on the snom 320 even when there's no message waiting in Asterisk. We've managed to make the voicemail button work using fromdomain=192.168.0.1 in sip.conf vmexten=2500 (our VoicemailMain application extension in extensions.conf). We also added notifymimetype=application/simple-message-summary also in sip.conf to allow SIP simple MWI

Hi, I didn't get any response to this posting so thought I'd post again in the hope that anyone who missed the posting the first time may be able to offer some ideas. This problem isn't specific to the particular model of phone - I can see from sip debug that the local extension itself is not being sent any Messages-Waiting headers. Any alternative strategy would also be welcomed

Hello ppl, Am using realtime odbc storage for voicemail, sip users/peers, static for extensions and so on. My issue is I am not getting MWI for any fones, even tho I've got rtcachefriends=yes in sip.conf WIth tcpdump, I always see the NOTIFY going as Messages-Waiting:.no Voice-Message:.0/0.(0/0) even tho there are legitimate voicemails in the INBOX path for that particular users in the

Hi, I have a Cisco 7941 phone running SIP, and for a variety of reasons [1] have configured this in the short term to use my local Asterisk server to register to, and then have my local Asterisk server in turn register to the upstream SIP proxy at my voice provider. Voicemail is supplied by my VoIP provider, so I've no real need to set up voicemail locally. My provider also runs Asterisk,

I have the following setup: - UAs registered with SER/OpenSER - SIP peers (non cached), extensions, voicemail setup (not message storage) defined in Asterisk 1.2 using Realtime When a message is left in the user's mailbox, no Notify message is sent to SER. 1. If the SIP peer is defined in sip.conf with a host=ser.domain.com then the notfy is sent to SER. 2. If realtimecache=yes is set in

Greetings All, Regarding this archived post. http://lists.digium.com/pipermail/asterisk-users/2014-November/285169.html Did anyone ever find an solution to this? I've got a new box running 13.3.0 with the exact same issue. For those that don't read the link. I've got SIP Peers in realtime. All with a mailbox set. 98% of the time, These are loaded into asterisk without

I have my peers registered to SER.asterisk seems to be sending mwi for the peers seen in the sip show peers CLI command. i have my ser server registered with asterisk as a type=friend and all clients register to ser.how do i get mwi to work for these clients registered to SER. Thank you, -AA

I have a large group of 7960G's running Asterisk 1.2.4 using SIP 7.5. Most of the time the message waiting indicator works fine. Once or twice a day either an MWI is not sent to the phone or the phone misses it. I have not noticed duplicates being sent and I can't figure out the time, if any, a resend is made. Anyone know why I'm missing, loosing or not sending an MWI to the

Hello everyone, My setup: Debian squeeze Asterisk 1.8, DAHDI, libpri, compiled from source TE110P, attached to a Deutsche Telekom Octopus E Modell 300/800 I'm trying to get MWI for Voicemail working. In the same server I have also got an Eicon DIVA PRI card for testing purposes (it is integrated via CAPI and the chan-capi channel driver into my Asterisk). MWI works just fine there. I

Hi All - I'm running version SIP version 1.3.4 on various IP300, IP500, and IP600 Polycom phones. I'm having a tough time with MWI. I thought I remembered somebody on the list saying that they had it working, but I can't find it in the archives now. I have all the phones configured for MWI as specified in the WIKI: ipdmid.cfg: up.oneTouchVoiceMail="1"

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

Hello! I'm facing a problem concerning MWI. The problem is: The phone switches off the MWI exactly at the moment the second NOTIFY package for one voice mail arrives. The phone switches off MWI independently if the voice mail has been acknowledged or not before. The behavior in detail: - Once each hour, phone sends SUBSCRIBE - Asterisk receives incoming voice mail for Device 200. - some