similar to: Asterisk QOS working perfect using sveasoft 3.11g

Hi all, I''m having some problems setting up qdiscs on a bridge.The config looks a little like this: ifconfig ifb0 up # Bring up the IFB for this bridge. tc qdisc add dev eth2 ingress tc qdisc add dev eth3 ingress tc qdisc add dev ifb0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000 cell 8 # Raw qdiscs on each bridge port tc qdisc add dev eth2 root handle 1:0 cbq bandwidth

OK - this is starting to get frustrating... Are there any known issues with 2.6.9 and traffic shaping? I am using 2.6.9 with geoip 20041115, and get odd oopses. The following script oopses my box: ----------------------------------------------------- #!/bin/sh -x IFOUT=''eth1'' IFIN=''eth0'' TC=''/sbin/tc''

Hi All, I''m using HTB to shape traffic, a little like this: tc qdisc add dev eth2 root handle 1:0 htb tc qdisc add dev eth3 root handle 1:0 htb tc filter add dev eth2 parent 1: protocol 0x8100 prio 5 u32 match u16 3000 0x0fff at 0 flowid 1:1 action ipt -j MARK --or-mark 0x01000000 tc filter add dev eth3 parent 1: protocol 0x8100 prio 5 u32 match u16 3000 0x0fff at 0 flowid 1:1 action

Hi, I''ve used old ZPH patch under squid 2.4 Stable4 and it works great ! Now I want to patch squid 2.4 stable 5, with new patch, on http://www.it-academy.bg/zph/ I''ve patched and installed squid 2.5 stable 5 succefully, but I can''t get ZPH works. I''m trying with ... $TC class add dev $LANDEV parent 1: classid 1:7 htb rate 1Mbit $TC filter add dev $LANDEV

Hello, I am using a simple script, which is based on prio. The point is, that it is not possible to use htb on wifi networks, so I thought that prio will work fine, but it does almost nothing. All I wanted was to make the important packets like icmp, games, VoIP,... to go first, and to slow the things like FTP data transfer, etc. When I use $TC -s qdisc show dev ${IFACE}, I see, that the

Hi, I''m having issues with policing my incoming traffic by matching packet marks made by iptables. I''ve checked as many sites and guides as I can find, and I seem to be doing the exact same thing as they all are, but there''s still no success. As such, I was wondering if anyone can have a quick look to see if I''ve done anything obviously stupid? Essentially, I

Hello i have some problems on 2.6.14 kernel dummy and iproute :) i have server with 2 nics : eth0 <> inet eth1 <> lan dummy0 (i want to shape incoming traffic from lan machine on this interface) my config: tc qdisc del dev dummy0 root tc qdisc add dev dummy0 root handle 1: htb tc class add dev dummy0 parent 1: classid 1:1 htb rate 100kbit ceil 100kbit tc class add dev dummy0

Hi, I just migrated my office's server from Slackware64 14.1 to CentOS 7. So far everything's running fine, I just have a few minor details to work out. I removed the firewalld package and replaced it by a simple Iptables script: --8<---------------------------------------------------- #!/bin/sh # # firewall-lan.sh IPT=$(which iptables) MOD=$(which modprobe) SYS=$(which sysctl)

Hello guys I don''t know if this thing has been posted before (if it was , please forgive me). I have 7 computers at home and I want all of them to have access to the internet. In order to do that , I set up a linux router (2 network cards) as a usual router (eth0 : 82.77.69.75 - internet connection ; eth1 : 192.168.10.1 - local network) . The other computers have ips ranging from

Howdy all, I posted this message to the netfilter mailing-list and didn''t get much response. I apologize if anyone here is getting this for a second time. Anyway, I recently migrated my firewall from a FreeBSD box running ipfilter, ipnat and dummynet to a Gentoo Linux box running netfilter and tc. I have to admit that I''m having problems visualizing tc in my head. So, I was

This is a SER/Polycom question, but I hoped we may have some SER guru's here... I have a series of Polycom phones that are tying to register with OpenSER. The phone sends a REGISTER message, and OpenSER replies with Unauthorised (all normal). The phone re-sends the REGISTER with the credentials, and OpenSER sends Ok. Here's where it goes downhill. The polycom's appearance display

Hi. -j IMQ is equal -j ACCEPT...? i mean it after -j IMQ packet don''t return in parent chain??? cause -j ACCEPT action accept the packet in the child chain and don''t return it to parent... example: ipt="iptables -t mangle" $ipt -N HTTP $ipt -A HTTP -j IMQ // after this packet packets go to -t nat tables? or // it return to parent chain (PREROUTING) in mangle?

Is anyone getting '500 Internal Server' errors back from their Polycom phones when Asterisk sends a SIP NOTIFY message to them? I called Polycom tech support, who where utterly useless. Of course Polycom won't officially support it anyway, as they only support Asterisk Business Edition. We're using 1.2.9, but it's been ocurring for quite some time. We have about 35 phones and

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=505 ------- Additional Comments From mbr@cipherdyne.org 2007-03-24 06:01 MET ------- I've tested the proposed patch against the iptables-1.3.7 source, and find that it works in the reported broken case: # iptables -A INPUT -m string --algo kmp --string 111\"222 -j LOG # ./iptables-save > ipt.out # ./iptables-restore

Hi folks, When compiling the attached example with -ftrivial-auto-var-init=zero: $ clang -no-integrated-as -mno-sse -m64 -mstack-alignment=8 -O2 -ftrivial-auto-var-init=zero -enable-trivial-auto-var-init-zero-knowing-it-will-be-removed-from-clang -g -o ipt.ll -c ipt.i -w -S -emit-llvm , Clang generates an initialization memset() call for |acpar| in the IR: %0 = bitcast

Hello all, I am trying to make a filter into my QoS rules and I founded that when I try to use filters u32 and with fwmark they do not work together. This is the filter I use, just and example, for u32: $TC filter add dev $DL parent 1:0 protocol ip prio 1 u32 match ip sport 22 0xffff flowid 1:10 This is working fine. Now if I try to mark a package that I want it to go to the same

Hello! I''ve put some questions on this list some weeks ago and I''ve got good answers. Thank you! Now I''ve finished my (beautyful) script and I ran it on my router... About my script: It routes packages based on their destination on the Internet. I have about 1650 preffered destination networks listed in some file. The script read this file and marks every package for

Hello All, I have a strange problem regarding samba 3.0.37 I have samba server installed in the local network behind NAT, the router iptables are configured as follows: #samba $IPT -t nat -A PREROUTING -i $INET_IFACE -p udp -d $INET_IP -m multiport --dports 137,138 -j DNAT --to-destination $FILESERV $IPT -t nat -A PREROUTING -i $INET_IFACE -p tcp -d $INET_IP -m multiport

Is there a way to get asterisk to send you a email when it looses or an extension doesn?t re-register Roger Workman Business Development Upperclassman/Universal Holdings LLC Voice: 304.324.3800 Fax: 304.324.3801 ICQ: 4447584 Website: http://www.upperclassman.net Billing Questions: billing at upperclassman.net Rental Questions: rentals at upperclassman.net Maintenance: help at

Hello all, I have set my QoS solution and now I am facing a little problem... When I ping to my server it has some lost packages: Estatísticas do Ping para 172.30.0.1: Pacotes: SENDED = 1029, RETURNED = 880, LOST = 149 (14% de perda), Aproximar um número redondo de vezes em milissegundos: Mínimo = 0ms, Máximo = 686ms, Média = 105ms If I disable my QoS ping stats to be ok. I even have