similar to: Very decent book - "VoIP Telephony with Asterisk"

Has anyone used the Swissvoice IP 10S (www.swissvoice.net) VoIP Phone with *? Adrian -- Adrian Walker adrian@digitaltraffic.co.uk ======================================================================= This email has been scanned for Virus infection by MessageLabs For more information please contact messagelabs@atomwide.com

Does anyone know if there are any reseller for the book "VoIP Telephony with Asterisk" in Hong Kong/Asia region? I'm interested in purchasing the book but the shipping charge to Hong Kong is expensive. Thanks. Joseph -------------- next part -------------- An HTML attachment was scrubbed... URL:

I have had this book for a while and I must say I'm very disapointed with it. It's presented as a "technical overview of the open source PBX" but IMHO it's more like "a collection of howtos with rather confusing examples". It has about zero structure and doesn't really help you understand how asterisk works. I don't really recommend this book unless

I have set up a new SwissVoice phone and it can receive calls but I cannot make calls out from it. The setup is simple for now, 2 phones: SwissVoice is ext 7726 and Cisco 7960 (SIP) is ext 7999. I can call from the Cisco phone and it rings on the SwissVoice phone but when I dial from the SwissVoice phone I get a busy tone upon dialing the second digit. The log reads as follows: -- Endpoint

I need to purchase approx. 10 phones for a small office implementation. Nothing fancy is required besides a full-duplex speakphone, in the sub-$200 range. I am currently looking at the Polycom Soundpoint 500, Uniden UIP-200 and SwissVoice IP-10. I have searched around and found various posts regarding each phone's ability to work with asterisk (SIP, I probably should have mentioned), but

Hi, Does anybody know the place to download the firmware for swissvoice ip10s I have several phones with application IP10 H3 v1.0.0 (Build 1) I'm looking for newer H.323 and also MGCP firmwares Are the SIP firmware available, according to web its targeted to Q1 2004, but we have week left in Q2 I sent several email to swissvoice support,, no answers Regards Juri

I have 1 IP phone (Swissvoice IP10S) and 1 POTS phone. When I dial the number for the IP phone off the POTS phone, the IP phone rings. But when I pick up the handset on the IP phone, I get a busy signal and this message on *: Aug 23 09:38:57 NOTICE[1142106560]: chan_mgcp.c:2243 handle_response: Terminating on result 502 from svip10@00059002042b-1 Here is the entire session. svip10 is the 1 and

Hi All Has anyone managed to get the hint priority with Swissvoice IP10S phones working? I have 2 phones: a Snom 360, setup as the reception phone on extension 11, and a Swissvoice IP10S on extension 12. When calling each other (tested both ways) I can only ever see the Snom 360 in the Active State from 'show hints'. The Swissvoice stubbornly remains in the Idle State when on a call!

Hi there, here some questions and experiences after playing for one day with 3 Swissvoice ip10s and the latest * CVS: QUESTIONS: - what is the user option "enter voice mail number" good for? It doesn't appear to be of any practical use - does anyone have some Swissvoice info that I cannot find on their web site like the guide to MGCP XML (.svd), guide to configuration file

Gee, I think the subject says the right thing. I've looked at the wiki at the various phones available, and basically I think what I am after is one of the following phones: Polycom Aastra 480i Zulty's Zip 4x4 Although after just reading through the review linked from the wiki, and the polycom website, it seems like these are one of the better phones, right up there with the cisco's?

Introducing the simple Twitter Directory for telephgony, VoIP and asterisk users, developers, providezrs, manufacturers and hobbyists If you're into Twitter and you'd like to take literally 10 seconds to go fill out this form with two fields, your Twitter name will be in the public directory of people who are interested in these technologies. http://tr.im/voipform You can look at the

Hi there, tonight I upgraded one of my ip10 phones to "Appli 1.0.0 build 3" with "Boot 0.3.6" This firmware is dated Dec.19, 2003. For Robert (aka "info lists") this fixed the multiplied digits problem (which I never had). Since there is no website of Swissvoice I guess you'll have to e-mail them if you want upgrade... Unfortunately the upgrade did

taken from bug 881 (now resolved) :-( ---------------------------------------------------------------------- markster - 05-19-2004 09:21 CDT ---------------------------------------------------------------------- As it turns out the 10S cannot conference on the device. From Jean-Francois at Swissvoice: Hi Mark, IP10S have not the capabilities to mix by itself 2 RTP flows, that why it refuses

I'm not sure that the problem lies in the NAT because the phone is talking to Asterisk. I'm hoping this is a simple config thing I've overlooked but I've tried all kinds of combos inside the [] in my mgcp.cfg file. The phone's IP is 192.168.1.116 (my comp is .110). The router to which the phone and my comp is plugged into has a WAN IP of 10.0.0.28. All the other comps (and SIP

Funny - I downloaded the latest Asterisk CVS, and it's pretty much working. Will report when I have some more success. PaulH -----Original Message----- From: Philipp von Klitzing [mailto:klitzing@pool.informatik.rwth-aachen.de] Sent: Tuesday, 28 September 2004 9:46 PM To: Paul Hales Subject: Re: [Asterisk-Users] Leader IP10S Hi! > I have been lent a Leader IP10S phone (SIP) for

I have a SwissVoice IP10S but can not seem to get it to have dialtone or dial on *. Calls to or from 3001 don't work. Any ideas are appreciated. Robert mgcp.conf is: [general] port = 2427 bindaddr = 192.168.0.110 [ip10] host = 192.168.0.5 context = from-sip line => aaln/1 The portion of extensions.conf is: exten => 3001,1,Dial(MGCP/aaln1,20) exten => 3001,103,Hangup

Does MGCP transverse NAT? Seeing as the only decent yet cheap IP phone is the Swissvoice, it would be rather helpful.

hallo, does anybody successfully managed to get swissvoice ip10s with h323 firmware work with asterisk ? mgcp firmware works fine, but with h323 i'm still getting one way audio. regards Marian -- SUNTEQ s. r. o. Hviezdoslavova 9 # Prievidza # 971 04 # Slovak republic Tel: +421-46-5430 754 # Fax: +421-46-5439 144 http://www.sunteq.sk/

But for us? _____ From: William Boehlke [mailto:william.boehlke@signate.com] Sent: Wednesday, January 11, 2006 2:24 PM To: 'Asterisk Users Mailing List - Non-Commercial Discussion' Subject: RE: [Asterisk-Users] Second edition of my * book has been released $39.95 retail. _____ From: asterisk-users-bounces@lists.digium.com

Hello Everyone, We are looking to interconnect with a local ILEC over an OC-n transport layer. They basically gave us two options in terms of mapping the SONET to the DS3: * VT1.5s mapping * DS1s mapping The second option is quite clear. We would MUX the connection, and plug the lines into qaud t1 cads etc... The tech mentioned that with the second option we would also need a DACS to convert