similar to: Access voicemail from Cisco 7960

The problem is some calls from the PSTN have hidden caller id so if you want to change it to something else then modify chan_sip.c #define CALLERID_UNKNOWN "Asterisk" I've changed mine to: #define CALLERID_UNKNOWN "Unknown" -----Original Message----- From: Shaun Ewing [mailto:sewing@gmail.com] Sent: 22 September 2004 14:16 To: Asterisk Users Mailing List

Hi! When I call a colleague of mine from my Cisco (via Asterisk), they get on their display: From Evert asterisk How do I remove/change the 'asterisk' part? Regards, Evert

Hi everyone! I have a problem... We have received a couple of phone numbers for voip from a local voip-provider. The work fine directly with a Cisco 7960, but so far I've not been able yet to integrate them into Asterisk. I've tried: /etc/asterisk/extensions.conf ***** [ip-incoming]

Hi everyone! I'd like to create the following: a user picks up the phone (gets a dial tone), dials '0' for an 'outside' line, gets a second (different?) dialtone, and is able to enter an external phone number. How do I implement this in extensions.conf...? Regards, Evert

Hi! If I install a CAPI-compatible ISDN-card in my server, will that: a) enable me to connect that server to the public phone net b) allow me to connect an ISDN phone to the server and use it as a SIP-phone c) all of the above? Regards, Evert

Hi everyone! situation: Asterisk-server A: 192.168.11.6 Asterisk-server B: 192.168.2.44 server B contains a register => username:password@192.168.11.6 But... when I boot it, I get: Registered to '192.168.11.6', who sees us as 10.138.3.2:4569 Why doesn't server A see server B as 192.168.2.44?? All other traffic going over these lines has no problems with this. The

Hi all, I have been looking at various alternatives for a system that runs several Linux & Windows guests. So far my favorite choice would be OpenSolaris+ZFS+RAIDZ+VirtualBox. Is this combo ready to be a host for Linux & Windows guests? Or is it not 100% stable (yet)? Greetings, Evert This message posted from opensolaris.org

Hi, I'm evaluating what could keep me from upgrading production systems to 1.6.2. As 1.6.2 seems pretty close to 1.6.1 but I gave 1.6.2 a try but I met an issue with BLF-pickup which kept me from going further. Have you met other issues I should include include in my checklist ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Is it possible to use asterisk with Free World Dialup (FWD) ? Did someone manage to make it work? how? Best, -P -- __________________________________________________________ Sign-up for your own personalized E-mail at Mail.com http://www.mail.com/?sr=signup CareerBuilder.com has over 400,000 jobs. Be smarter about your job search http://corp.mail.com/careers

Hi all! I'm trying to have asterisk route all outgoing calls out via my VOIP provider. exten => _NXXXXXXX,1,Dial,SIP/BYEXTENSION@VOIP seems to have them to in the direct direction. However, debug shows that my asterisk doesn't identify itself correctly: Sip read: SIP/2.0 100 Trying From: "Evert"<sip:asterisk@[my IP]>;tag=as0aca53fa To: <sip:[dialled

From a 'sip debug': Sip read: SIP/2.0 100 Trying From: "Evert"<sip:[username]@[my ext. IP]>;tag=as6e18534e To: <sip:[dialled number]@[SIP server of VoIP provider]> Call-ID: 6cbf41c25281f08b2e7bbc5043061975@[my ext. IP] CSeq: 102 INVITE Via:SIP/2.0/UDP [my ext. IP]:5060;branch=z9hG4bK4fd1045b Content-Length:0 7 headers, 0 lines Sip read: SIP/2.0 403 Forbidden

Thanks to ww and his patch on bug #104, I have successfully implemented Asterisk behind NAT without using STUN or anything crazy. It's quite straight forward. Until this gets tested enough and put into CVS, you will have to patch your chan_sip.c file to do this. I'm sure within the next few days this will get put merged into CVS if no one finds any problems. I tried this on chan_sip.c

Hey all, I am in the middle of creating a new user wizard which will generate all the .conf's the new Asterisk user will require to get themselves up and running in Asterisk without having to touch a single configuration file. This is what I have come up with as a rough draft. It is far from complete, so I'm asking people to submit things that should be added, changed, removed

Jared Smith, Jim van Meggelen, and Leif Madsen of the Asterisk Documentation Project, in conjunction with O'Reilly Media are pleased to announce the official release of Asterisk: The Future of Telephony on Friday, October 14, 2005 at AstriCon 2005 in Anaheim, CA. In the true spirit of Open Source, the authors and O'Reilly Media have published the book under the open, Creative Commons

Can someone show me how to set up DUNDi, I will be using it to connect 14 asterisk servers internally. I don't want to use it on the external world. If anyone has any examples of connecting 2 or 3 (if their is a difference) machines in a DUNDi co-operation that would be helpful. Johnathan Falk Network Administrator Clinton Community Schools

Hello all, I would like to document some things I am doing with asterisk, but would prefer to do this from a web interface. I am unfamiliar with any software that allows you to create online documentation from a web interface. Ideally I will be able to create documentation online from a browser, which then when saved, is immediately ready to be read online. Perhaps I can setup different authors

Dear All, I want to play music in my AGI while i am searching for a field in DB. Actually during some processes in AGI i need to play music . Thanks in advanced. Regards, Mehdi

Forgive me if this is a FAQ question but I didnt see anything on the website of forum spelling out the difference between 1.4.x and 1.6.x Obviously 1.6.x is in development. Is it stable enough for production use? What are the new features being implemented in 1.6.x? Will Cepstral work with 1.6.x? Thanks, Mike -------------- next part -------------- An HTML attachment was scrubbed... URL:

Dear All Can you please let us know how we can modify our Asterisk "extensions.conf" file so it interprets the subscriber dialed digits in one-by-one digit manner . At its current configuration , it interprets them in an whole packet . I mean , say the subscriber dials as "665 0000" so we need Asterisk to send it to the peer switch as 6,6,5,0,0,0,0 but not as one

Hi all! We use a PHP-portal for management of our projects & contacts. Now I would like to make it possible to dial contacts directly from the portal. Since users have to log in, I can use that to determine which office phone the call should originate from. And the number-to-be-dialed is of course also listed. How do I commence here? I'm pretty sure others have done this already, so