similar to: Nat...again....

I had been running an older patched CVS to get VOIP working with NAT and everything had been running fine. I just built * on a new box with CVS-01/18/04-12:19:25. And now I can get remote SIP users to register. Has anything major changed... [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to externip = 69.132.68.17 ; Address

Hi Mark, Are you still having audio problems between outside SIP channels? Make sure that you have set the following for all SIP channels in your sip.conf canreinvite=no -- sudhir > Message: 2 > Date: Mon, 26 Jul 2004 22:46:22 -0400 > From: Leif Madsen <leif.madsen@gmail.com> > To: asterisk-users@lists.digium.com > Subject: Re: [Asterisk-Users] Nat...again.... >

Thanks for your reply. canreinvite has been set to "no" from the beginning...still no luck. Maybe I'll be able to take a trace of it tonight...we'll see...but any thoughts at all are appreciated! -Mark > > Hi Mark, > > Are you still having audio problems between outside SIP channels? Make > sure that you have set the following for all SIP channels in your

I have an asterisk server behind NAT - no audio on the test external calls I have tried making so far. Read http://www.voip-info.org/wiki-Asterisk+SIP+NAT+solutions - No solution evident from there, sounds like I have case 9. I would have thought that all I would have to do is port foward and have the external IP on the asterisk server, which I have done I have fowared 5060UDP, 8000UDP, and

Lance, Have you configured your sip.conf to use these aprameters under General? ;externip=66.213.227.66 ;localnet=192.168.1.0 ;localmask=255.255.255.0 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Lance Grover Sent: Thursday, June 02, 2005 9:39 AM To: Asterisk Users Mailing List - Non-Commercial

Dear List members, After succesfully installing the * on a couple of systems, and putting them on test, I observed that there is an intermittent call drop on PSTN line. The systems are - Dell Optiplex P3/500MHz/128MB - Built-in ethernet - 1 X100P (Motorolla chip) card on PCI - 10G HDD etc. - Asterisk April 17 CVS. - 2 Mediatrix FXS ATA (4 phones) - 2 Grandstream phones. - sip.conf, zaptel.comnf

Hi guies, I know I know this subject have been The most written subject about VoIP Right... but I just want to make clear, just one time ! If Asterisk is on a Public IP Address and a softphone behind the nat, sip.conf must contains for this phone: nat=yes .... Now if I want to configure my sipphone (X-Lite) placing behing the NAT, it must have in "Domain/Realm" the external IP

Hello. I have an Asterisk server (ViciDialNow) set up behind NAT. I can manage to make outbound calls, but the communication drops off after 30 seconds or so. I'd really appreciate having some assistance from the mailing list on this issue. So, I'm having an Asterisk server behind a firewall and Zoiper softphones on SIP connecting to Asterisk on the same local area network. The

I'm running asterisk on a Freebsd with 2 Nic's. Inside NIC is 192.168.5.x where the phones are. Outside NIC used to be a public IP with the ISP's device set to bridging, but the new WiMAX router only offers me the public ip 94.18.x.x on the outside, and forwarding everything to 192.168.1.50 on the "Outside NIC" Some of the phones are being disconnected with Asterisk

Set busydetect=no in your zapata.conf file. That should stop the random hang-ups. If you really need busy detection, try setting busycount=8 or even 10. If you still get random hang-ups, turn off busy detection and turn on call progress. May help the situation. Gregory P. Scasny Golden Technologies Inc. http://www.golden-tech.com 219-462-7200 -----Original Message----- From:

Hi All, I have a asterisk box that is now on its own static address on the net.it was originally behind a nat firewall. The problem I have is that the remote SPA-2000's that are behind nat firewalls now fail. here is relevent sip.con entry [2001] type=friend username=2001 host=dynamic defaultip=81.178.77.67 allow=ulaw dtmfmode=rfc2833 mailbox=2001@local context=sip

My asterisk box is behind a NAT firewall. I have friends that are on Earthlink, Vonage, etc. I'd like to make VOIP calls directly to them rather than going through the PSTN. With Earthlink, I can make this work through FWD peeting numbers, but that's sort of a waste of FWD bandwidth. WIth Vonage, it doesn't work. I suspect this is because of the breakage between FWD and Vonage that

i've got * and phones in small home network all behind NAT. Outbound to iconnect proxy works great. Now to get in/out working with another carrier. Carrier2, Commpartners, i have working with one of the phones and a soft phone without * just fine. Next I register the phone with * fine. Create a trunk, but it the trunk fails to register... help I'm getting the following msg during

On Mon, Apr 11, 2016 at 6:10 PM, Jonathan Hunter <jmhunter1 at gmail.com> wrote: > It sounds as though there are files on your servers owned by a UID or GID > (most probably a GID) that is not in /etc/group, and is being looked up and > "reverse resolved" to 'NT AUTHORITY\Authenticated Users', but this somehow > doesn't map back the other way, i.e. from a

Asterisk stopped answering the calls. I'm just experimenting with asterisk, upon setup there is a [demo] context. I have SPA-3000 with PSTN line: Dial plan 2: S0<:1000@10.0.0.101> my sip.conf localnet = 10.0.0.101 localmask = 255.255.255.0 [3000] type=friend host=dynamic username=3000 secret=my_secret mailbox=3000 context=from_pstn callerid="PSTN GW" <3000>

I found this configuration file on Wiki for FWD behind firewall ; SIP Configuration for Asterisk ; [general] disallow=all allow=ulaw port=5060 ; Port to bind to bindaddr=0.0.0.0 ; Address to bind SIP channel to externip=xxx.xxx.xxx.xxx localnet=172.16.1.0 localmask=255.255.255.0 context=inbound-sip ; Default context for incoming calls maxexpirey=180 defaultexpirey=160 tos=reliability

I am having difficulty configuring SIP behind NAT (using latest CVS). Using sip.conf: [general] port=5060 ; Port to bind to externip=ww.xx.yy.zz bindaddr=0.0.0.0 nat=yes register=>[userid]:[password]@voiptalk.org/2000 [voiptalk.org] nat=yes externip=ww.xx.yy.zz type=friend secret=[password] nat=yes reinvite=no canreinvite=no I fail to register. SIP Debug gives: SIP

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

Now that I have most everything actually working I've noticed that about every 3-4 days on average..... and at worse... Once a day my asterisk box seems to lose it's registered state with our sip provider and no longer will take any incoming calls. The caller simply hears a fast busy (reorder) If I do a reload at the command prompt all is well for another few days..... What I'm

SetUp: - Asterisk behind a NAT, - Red Hat 9.0 - Asterisk 1.2.14 My Asterisk box is behind a NAT and I have a DiD from an ITSP. I have my dial plan set up so that when outside callers dial the DiD, the call is answered by my auto-attendant. The caller can then select who they'd like to speak to and the call is transferred to the external line associated with that person (usually a mobile