similar to: Status of Q.SIG on Asterisk?

I have been investigating more tight integration between * and the Nortel MICS... it appears that it is at least theoretically possible to have * store voicemail and log which stations call where. Both require a T1 card. The T1 card requires either a clocking module or the 6-port fiber module to provide T1 timing. Naturally a T100P or TE405P is required on the * side. To log which

Hi, Looking through the source code, I see two functions in the 'libpri' code for message-waiting: pri_mwi_activate, and pri_mwi_deactivate, but they are not used by anything anywhere. Is there a sample application somewhere which makes use of these functions? I believe that the ISDN MWI is used when a Norstar MICS has an external voicemail provider. I don't know exactly how this

Unfortunatly no on both counts. The arrangement right now has: PSTN Trunks & Stations <-> Nortel Norstar#1 <-CT1-> Asterisk#1 <-IAX2-> Asterisk#2 <-CT1-> Nortel Nortstar#2 <-> Stations The Asterisk boxes provide Voicemail to their sites Norstars and intersite calls over IAX. Local Voicemail works flawlessly at each site but there have been reports of PSTN calls

At the moment we're not - the email notification from Comedian Mail has been mostly sufficient. I do however have some Dialogic D/42-NS PBX emulation cards and the plan is to use them to set and unset the MWI lamps based on events pushed out of Asterisk. They may be obsolete hardware but they came in real handy for extracting the voicemail from the old StarTalk NAM too. Take a look at the

I am looking at setting up the following configuration and any help/input/comments before signing the PRI contracts will be greatly appreciated. PRI Tampa PRI Sarasota PRI <--> Nortel BCM-->Asterisk<------------------>Asterisk<---> I would like to link the Nortel BCM to * using the a digital trunk card. The BCM will

Guys, I need to make asterisk connect to another device over a pri using QSIG signalling (master/slave). Is this feasible and has it been done before? Thank you! al. _________________________________________________________________ Get ready for school! Find articles, homework help and more in the Back to School Guide! http://special.msn.com/network/04backtoschool.armx

All good information, thanks. However this is private network between Asterisk and a Norstar MICS about six feet away. So I'm holding both ends of the link. :-) > -----Original Message----- > From: David Troy [mailto:dave@popvox.com] > Sent: September 16, 2004 4:57 AM > To: Asterisk Users Mailing List - Non-Commercial Discussion > Subject: Re: [Asterisk-Users] No Caller Name

To All; My current issues is a 5 second delay for call that is being transferred from the Norstar units to the Asterisk servers VIA a PRI. Is their anything that can be done to speed up the transfer on the Norstar. Below is my current phone config. < Norstar1 >----PRI----< Asterisk-1 >----IP-WAN----< Asterisk-2 >---PRI---< Norstar2> The Norstars are MICS 0x32 4.1

----- Original Message ----- > Message: 3 > Date: Thu, 16 Sep 2004 07:57:15 -0400 (EDT) > From: David Troy <dave@popvox.com> > Subject: Re: [Asterisk-Users] No Caller Name sent from Asterisk over > National or DMS100 PRI to a Norstar MICS? > snip> > > I have a PRI link up and running between Asterisk and a Nortel Norstar MICS > > v4.1 . I'm having a

I am currently working on an Asterisk test system, and will be presenting a demo to the Board of Directors tomorrow night. I want to make sure I have all of my ducks in a row. The Asterisk system will be used to replace a Norstar MICS. The location has two PRI's coming in, with a few hundred DIDs. I know how to make * use the DIDs incoming, and I know how Nortel uses the DIDs. Now for the

Hi, Is it possible to set the pridialplan (or prilocaldialplan) on a call-by-call basis, or for a particular PRI channel-group? >From my experimentation so far, it appears to me that the pridialplan and prilocaldialplan are global in zapata.conf, unlike other options such as switchtype, signalling, and context. I currently have two PRIs from different providers (and different

I have a PRI link up and running between Asterisk and a Nortel Norstar MICS v4.1 . I'm having a problem getting the textual Caller Name across the link from Ast to Ns, however numeric Caller ID arrives and displays fine. From Ns to Ast both elements come through fine. I'm forcing dummy values for testing using: exten => s,1,SetCIDName(Test) exten => s,2,SetCallerID(1234561234)

I have a situation where I am receiving DID calls using Immediate Start Pulse signalling on a Loop Start trunk. The line terminates on a Newbridge Mainstreet 3624 channel bank, which provides battery etc. The channel is converted and routed to Asterisk. The lines are configured as follows: /etc/asterisk/zapata.conf ; Channels 1-24 service MainStreet 3624 channel bank context=infrom-did group=1

I'm trying to access feature codes remotely over a channelised T1 between a Norstar MICS (rev 4) and Asterisk. The timeslots are configured E&M and have been working fine under most circumstances except this one. There is mention of accessing the facility by calling Flash() from within extensions.conf, but I can't get it to work... Right now I can't tell if it's because

I am getting the following information and asterisk 1.0.7 is not answering the call. Any ideas? jerry ------------------ Sip read: INVITE sip:2828;phone-context=cdp.udp@qg.com:5060;maddr=161.49.198.102;transport=udp;user=phone;x-nt-redirect=redirect-server SIP/2.0 From: <sip:3173241052;phone-context=+1@qg.com;user=phone>;tag=c22da8c0-13c4-429efa71-657b8da-2ed To:

Hi all, I'm currently gearing up for a possible PBX replacement project using Asterisk, and I'm just breaching the iceberg of information that's available. I typically like to have something thick with pages in front of me. Mahler's book was the first one to come up and it seems like a good place to start. However, the big name bookstores tell me it'll take up to three

All, I am connecting to a CS 1000 nortel PBX. I can call out, I have limited success with call in. I get debug traffic that a call is coming in but I get the message "Unable to create/find channel". I was expecting that incoming calls over the trunk would be handled from my sip definition and goto the nortel context. It is not. Below is the actual incoming call debug information. I am

I have just installed the Alsa drivers for my 2.4.18-14 kernel (RH8). I have configured the sound card ok with alsaconf and tested with the aplay , works fine. But when I run asterisk it says.. ------------------------------- [chan_alsa.so] => (ALSA Console Channel Driver) Apr 20 18:28:34 ERROR[8192]: chan_alsa.c:339 alsa_card_init: snd_pcm_open failed: No such device or address Apr 20

Out of the blue i started receiving the following error on my PRI line which connects my asterisk server to a Norstar 0x32 key system. The asterisk zaptel.conf file was configure as follows and this config worked for 6 months until friday. Nothing was changed on either system prior to friday. here is teh zaptel.conf span=1,0,0,esf,b8zs bchan=1-23 dchan=24 span=2,0,0,esf,b8zs bchan=25-47 dchan=48

I am the proud new owner of a TE410P, and installed it on a RedHat 9 box. After compiling just fine, running like a champ in tests, and having my extensions.conf configured to taste, I went ahead and did a live beta test this past weekend. The phone system stopped responding 3 times. The first time, I got into the asterisk console, vi -rvvvvv. I didn't see anything too out of the ordinary,