similar to: ringing tones for E100P (like early B3 in chan_capi)

Hi, I've just installed Asterisk 1.2.0-beta1 for the first time and downloaded chan_capi and compiled it in and run it. (For comparison purposes, I've tried this with both chan_capi-0.4.0PRE1 and chan_capi-cm-0.5.4 and chan_capi-cm latest CVS). Whilst most things are fine, it seems that if I specify the 'b' parameter in the dial string before the number, sometimes the early

I seem to be having a problem with B3 on my ISDN line, as you can see from the dial string I am having to have asterisk generate ringing else there is no progress indication. -- Executing Dial("SIP/0014A8ACCB83-fd9f", "CAPI/g1/142392203000/ b|40|r") in new stack -- Called g1/142392203000/b -- CAPI/ISDN1/142392203000-0 is proceeding passing it to SIP/

Hi all, I have a Diva Server V-BRI-2 card, which support, as written in reference guide: Extended tone processing (human talker detection, generation and detection of country-specific tones) I would like to detect human speech and fax tone with asterisk. I think that the diva card transmit a DTMF code when detecting voice, but chan_capi doesn't receive this DTMF code. I verbose it

I have been using chan_capi and a Fritz AVM (passive) card for a little while now.. So far so good.. There are still a couple of things I am not totally sure about.. First.. What is the difference between "softdtmf=0" and "softdtmf=1"?? Which is the preffered/recommended option?? Second.. What is Early B3 all about?? Should I be using it in my dial string?? Which is the

Hi, I just bought the E100P from digium. It has both keys: 3.3V and 5V, so it would fit both, in a 5V-PCI slot and in a 3.3V PCI slot. Is it true, that I can plug it without destroying it in an ordenary 5V PCI slot? Roger.

Hello, I am using chan_capi 0.3.5 and Asterisk CVS-v1-0-12/29/04-15:32:48 on a SuSE Linux 9.0 with Kernel 2.4.21-99-default In the system is a AVM C4 with one port connected to PSTN at PTP BRI and another one to an ISDN PBX with an PMP BRI. The system is running fine, but I have regualary this error, and then chan_capi is not working anymore. Jan 18 15:29:46 WARNING[2919]: Avoided initial

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

Hello, Thanks to members of the list things changed on my installation (asterisk + digium E100P with of course an E1 line). Here is my zaptel.conf : - span=1,1,0,ccs,hdb3 bchan=1-15,17-31 dchan=16 loadzone=fr defaultzone=fr - Output of zttool: - Alarms Span YEL/RED Digium Wildcard E100P E1/PRA Card 0 - [root@asterisk root]# head /proc/zaptel/1 Span 1: WCT1/0 "Digium

Hi, I'm having a problem with DTMF tones from my SIP client apparently crashing the chan_capi driver. However I'm not sure whether this is a bug or misconfiguration on my part: if I set "softdtmf=1" in /etc/asterisk/capi.conf the problem goes away. Does the AVM B1 not support DTMF detection? The set up I have is using latest CVS (3 days old) running RH8 on a 933MHz P3. SIP

Just cross pairs 1-2 and 4-5 1 <--> 4 2 <--> 5 Never done an E1, but I think it's the same for a T1 4 wire cable. Tim Thompson Commercial Sales Engineer http://www.amatechtel.com (806) 722-2227 -----Original Message----- From: bam [mailto:bam@cqm.co.uk] Sent: Monday, December 29, 2003 9:12 AM To: asterisk-users@lists.digium.com Subject: [Asterisk-Users] E100P pinouts

Hello asterisk-users, I recently set up an asterisk server using Debian Sarge. I also added an ISDN card (AVM FritzCard PCI) to the machine. I built amd installed a new kernel (2.6.15.1) with modular support for the CAPI stuff and also integrated the FritzCard driver available from AVM. capiinfo succeeds in correctly showing the ISDN card. When talking from one PC to another via SIP, everything

Hello, I have a E100P card from digium and I try to implement a conference bridge in asterisk. I wonder since I got the E100P card do I still need to load ztdummy for caller from h323 endpoints to work with Meetme? I load the E100P driver but i did not load the ztdummy driver. My h323 caller does not hear any voice play by Meetme. Looks like ztdummy is required as long as h323 is concern and

Hello all, I'm having problems getting chan_capi 0.3.5 to work well with an Eicon Diva Server card using using the driver from linux kernel both 2.6.10 and 2.6.12 (vanilla versions). I have a (really two) producci?n system(s) running chan_capi in another identical Eicon Card using kernel 2.4.27 and the Diva Server drivers from Eicon. I installed an compiled the source level rpm

Hi, I had a question regarding asterisk installation with 2 E100P card. I would like to do such installation but I had some troubles: PABX -> E100P -> asterisk -> E100P -> PSTN In fact I would like to add some IP Phones to my PABX wich is full. But with this installation, I can't place call. I can receive call without problems. I also can place call from IP Phone, but I

Hello everyone, I have been using an AVM Fritz! card with chan_capi and mISDN for quite a while in PTM mode and it was working finely. Now, I needed more DID/MSN, so I switched to PTP. But now nothing works anymore :( I am using Asterisk on Debian Sarge stable and installed Asterisk along with chan_capi from apt-get. I installed mISDN from the CVS of isdn4linux.de. It is : - Asterisk

Hi all I am wondering if anyone has had a similar trouble to this: The timeout arguments in the dial command does not work. The caller does not get disconnected when the timeout reaches zero. I am not sure if this is a chan_capi issue, or a asterisk issue. I am using CVS-head and chan_capi CVS head also. Any suggestions or help will be appreciated. Thanks Clive

hi see below's conversation. it seems the e100p card doesn't work with BT. Any idea how this'll work against Telenor (norway)? roy <RoyK> does anyone know if I can trust the E100P to do full PRI stuff in .no? <cypromis> dunno about no <cypromis> I cannot use it in UK <cypromis> cause the framer has problems with system-x switches at bt

Hi everybody, I have problems with the chan_capi in the P2P (DDI) mode and it is not possible to use zaphfc, because I need call defelction. This is my capi.conf: [general] nationalprefix=0 internationalprefix=00 rxgain=0.8 txgain=0.8 language=de ;mode=immediate isdnmode=ptp ; 123456 -0 [interfaces] msn=1234560 incomingmsn=1234560 controller=1

Hi; I've been asked to take a (remote) look at an Asterisk@home system running asterisk 1.0.9 on Centos 3.5. It's running chan_capi-0.3.5 It has an AVM c2 ISDN card which is plugged into what I believe to be a couple of BT ISDN2e "System Access" (i.e. point to point) connections. We've placed a support call to BT to find out how these lines are actually provisioned, but

Hello list, i've got some problems getting a E1 line with a E100P up and running (germany). # cat /proc/zaptel/1 Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS/CRC4 YELLOW RED "YELLOW RED" sounds not so good. When launching asterisk, enabling pri debug on that span, i see outgoing attempts: ;---------- snip -------- > [00 01 7f ] > Unnumbered