similar to: chan_capi busydetect

Hi, I am having a problem with (Asterisk is crashing) with a Fritz card PCI / chan_capi. Receiving Calls from PSTN works, but outbound calls make asterisk crash (Speicherzugriffsfehler/Segmentation fault). The crash occurs upon dialing with the other phone not even ringing. I hereby ask if somebody reading this list can confirm or disprove my issue. Does anbody run a recent asterisk 2.6 with

Hi, I'm new to asterisk and try to get it work with capi.so. When I try to start asterisk with "asterisk -vvvvc" I get the following errors. I couldn't find any hint on the net what may be wrong in my configs. Has anybody got a hint? Here is the error output: [capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf': Found Jun 23

Hi, I have to develop a phone application using asterisk's chan_oss. When the phone is idle, i.e. the last command was a hangup, one hears a "toot, toot, toot, ..." But unforuntaly its use is in Germany, where one expects a continous "toooooooooooooooooooooooooooooooooo ..." before dialing. Is there anything to define the tone indicating "ready to dial"?

Currently we have problems with our asterisk server connect with an Eicon Diva 4BRI Card to a PBX. Asterisk is running in version 1.0.0 on RedHat Enterprise Linux 3AS with kernel 2.4.21-4.EL. The Diva server is running in version 7.5 Can someone help us in reolving the errors with incoming calls? When we try to call to an extension we get these messages in the CLI: -- creating pipe for

G'day all, I've been googling myself silly looking for help on this one but have come up blank. I have an AVM Fritz!Card PCI, and I'm using chan_capi v 0.3.1 with * from CVS-HEAD-05/08/04-22:48:00. I can start * and make and receive calls on ISDN fine but after a few hours of * uptime, on any ISDN call I make or receive from my SIP handsets (7960 or ATA-186) I get bad audio: on the

I'm now up&running with - mISDN with avmfritz driver for Fritz PCI card - chan_capi from debian recompiled with a patch (see below) - EuroISDN with Point-to-Point (ptp) mode (Austria) - With Asterisk 1.0.7-BRIstuffed-0.2.0-RC7k from debian sarge But am having some problems: 1) I needed to patch chan_capi.c from debian sarge (see below) to give the new channel to asterisk in state

Hi everybody. I'm trying to setting up a V4 BRI EICON card on ASTERISK 1.0.7 My linux is a debian. It was working during a few days an suddenly (after a lot of reboot) I've got this error message that seems to be very popular but I couldn't find any answer on the net : ==============================================. Asterisk Dynamic Loader Starting: == Parsing

Hi *, I have set up a very simple asterisk configuration where I intend to be redirected to the voicemail whenever I dial 100 with my kphone SIP client. The problem is that asterisk can not find the stream 'vm-theperson'. I have made a non-standard installation (since I am just testing), and that file is located in /mnt/tr2/fake_root/installed/usr/local/var/lib/asterisk/sounds. 1. How

I seem to be having a problem with B3 on my ISDN line, as you can see from the dial string I am having to have asterisk generate ringing else there is no progress indication. -- Executing Dial("SIP/0014A8ACCB83-fd9f", "CAPI/g1/142392203000/ b|40|r") in new stack -- Called g1/142392203000/b -- CAPI/ISDN1/142392203000-0 is proceeding passing it to SIP/

Hello! I'm curently using * with two old Teles PCI card (wich, btw, were hard to install and make good use of) with ISDN4Linux. The sound quality is simply perfect. However both dialing in and out through the ISDN line, there seems to be a _little_ bit of echo that eventually gets on your nerves ! Also the echo seems to get a _little_ bigger after a minute or so into the conversation. Now,

Hello Armin, hello List I'm trying to get chan_capi working with asterisk from debian stable (asterisk 1.0.7, the debian version number is 1:1.0.7.dfsg.1-2). I managed to get it compiled by providing my own version of ast_copy_string. This is an Austrian PTP line. I can do outgoing calls fine (no comprehensive tests yet). For incoming calls, I'm getting "No answer" on the

Hi all, I?m using * with a Suse 8.1 (kernel 2.4.19-4GB). My hardware are a Eicon Diva 2.01 PCI and a Eicon Diva Server 4BRI; I have installed the drivers wich came with the distribution using the distro installer (yast2). I?m experiencing problems with outgoing calls so I?ll try with chan_capi instead of chan_modem. The point is that I?m having problems with the compilation:

OS: Redhat 9.0 Kernel: 2.4.20-8 Asterisk: latest CVS head Hi all, I try to compile the latest chan_capi, but it won't work. I also tried the patch that is arround there from frank sautter and I have installed the asterisk header files. Asterisk is working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci

Hi there, the subject says it all... I get the following error messages: ---- mmielke@pbx:~/chan_capi-0.3.5> make gcc -pipe -Wall -Wmissing-prototypes -Wmissing-declarations -g -I/usr/include -D_REENTRANT -D_GNU_SOURCE -O6 -march=i686 -DCAPI_ES -DCAPI_GAIN -DCAPI_SYNC -DUNSTABLE_CVS -Wno-missing-prototypes -Wno-missing-declarations -DCRYPTO -c -o chan_capi.o chan_capi.c

I am trying to compile chan_capi 3.3.4a, but I end up with lots of gibberish. Near the top it states that capi20.h doesn't exist. Searching for the file, several show up: # find / -name capi20.h -print /usr/src/linux-2.4.21-144/include/config/isdn/capi/capi20.h /usr/src/linux-2.4.21-231-include/smp/include/config/isdn/capi/capi20.h

I've got a brand new Eicon Diva Server BRI card and I want to configure it with Asterisk. I managed to get asterisk and zaptel to compile and install, I've compiled and installed the drivers for the Diva card and now I need to compile and install the chan_driver for chan_capi. Unfortunately this fails miserably. I get the following messages: I'm using: Kernel 2.6.16.37.4,

I'm trying to compile chan_capi-0.5.4 on Slackware 10, but I have bunch of errors. (By the way, can I use chan_capi for ISDN card with winbond w6692cf chipset?) I'm not a linux expert, still :-) Before compiling, when I type "modprobe capi" to load capi module, and then "lsmod", i get list of modules: capi 6208 0 kernelcapi 30496 1

Thanks Jorg, it's worked, but what modules i need to use it with asterisk? I insert load => chan_capi.so in /etc/asterisk/modules.conf and chan_capi.so=yes under [globals] section. When asterisk start, I get this error: == Parsing '/etc/asterisk/modules.conf': Found [chan_capi.so] => (Common ISDN API for Asterisk) == Parsing '/etc/asterisk/capi.conf':

Hi, I have configured chan_oss and chan_capi (asterisk from CSV on Monday), and I can dial from the console: *CLI> dial 830774 -- Executing Dial("OSS/dsp", "CAPI/872058:b830774|60") in new stack -- Called 872058:b830774 -- CAPI[contr1/872058]/3 is making progress passing it to OSS/dsp ... Now I want to dial via telnet for later usage by a soft phone

Hi, I'm trying to make work chan_capi with last asterisk CVS. I installed last zaptel,libpri,last cvs ana patched chan_capi 0.35 with the patch kindly suggested me by Jason Williams: http://www.levigo.de/VoIP/chan_capi-0.3.5-cvs-HEAD-patch.tar.bz2 First I received error 127 that I resolved commenting the line CC=gcc-2.95 but now I have this error: chan_capi.c: In function `load_module':