similar to: Strange behaviour using 7960

I ordered 10 7960's with SIP today (YAY!), I should have them on Monday! So, to be better prepared come Monday morning, I was wondering if anyone knew of any * compatible screen configs for things such as browsing VM, etc, yadda, yadda. I checked out the wiki about ADSI but from what I see, that's not really applicable in a SIP setup? I'm guessing it's going to be a more XML

Hi Adam, I appreciate your feedback, and understand totally where you're coming from as far as the database perspective goes. For the first "draft" of the app, I think I'm going to let it default to using a conf file for two reasons. First, my setup currently does not utilize a database. I would like to move to that type of a setup in the future however. Secondly, seeing as

Hello, In setting up * for my company's office and remote employees, I have a question about how to log one username into * as either a SIP account, or IAX account. For example, we will be using SIP phones in the office locally to the * server, however some employees travel, and want to use IAX (as it's much friendlier with firewall/proxy setups than SIP) clients on their notebooks.

I have been attempting to download, compile and configure spandsp to function with * without much luck. I am guessing that some assumptions were made regarding the users knowledge level of Linux. Sadly, I must not live up to those assumptions. My problem begins when after compiling spandsp I look for the app_rxfax.c, app_txfax.c, app_dtmftotext.c and makefile.patch files to place in the

Hello all, I'm having a nightmare of a time trying to get stable results with SIP clients on Asterisk. I can't seem to find a configuration that works! In our office, we run a Sonicwall Pro 200, which is a sip aware, stateful firewall. Originally, I had configured Asterisk to run on the NAT side so that those within the office could connect easily, and those outside the office

Hi, We've recently deployed 6 Uniden UIP200 phones (running firmware 4.54). We've been having some serious problems: 1) All the phones randomly reboot themselves. Typically when trying to answer or initiate a call. 2) All the phones will disconnect from a calls with the PSTN after 2-3 minutes. 3) The phones are unable to interact with a remote IVR (digit presses are not received at

Hello all, I'm going to tackle learning C this week, and start writing my first * add-on/contribution; assuming it's actually worthy of contributing once it's done.. I think I've chosen a hefty project for my first go round here... I'd like to get some feedback from everyone on a FindMe/FollowMe spec I've put together. Before you read on, let me say, I don't want

Hi, Does anyone tried to get ipip or gre tunnel behind NAT environments. ? i''m trying to make both side tunneling with ipip or gre with private address just like belows.. A -------------------FIRWWAL -------------------INET ------------------- B PRIVATE PUBLIC PUBLIC (10.100.0.1) (211.xxx.xxx.xxx) (

I have a UIP200 on the way for eval. Does anyone have tips or tricks to get it working right away with * ? I hate having to go through the pain someone else braver than I went through already. :) Tim --

Hello I have /25 addressed on a box (virtual devices on eth0) and I want to tunnel some of these addresses to my home network. One address to my gateway (a.b.c.d, external IP) and one address to my internal network (192.168.0.0/24-style). I will use the tunnels for irc, smtp and surfing. What protocol and which technique is easiest and best to use? One more thing. I don''t want to set up

Hi guys, I''m trying to setup an IPIP tunnel between a Cisco router and a firewall running Debian GNU/Linux Sarge with Shorewall 2.0.13. I''ve read and implemented the http://shorewall.net/IPIP.htm document, but I don''t understand why there should be at the same time a "tunnel" and a "tunnels" script. Shorewall still refuses to let the

I am desperately trying to impute missing data using 'imp.mix' but always run into this yucky error message to which I cannot find the solution. It's the first time I am using mix and I'm trying really hard to understand, but there's just this one step I don't get...perhaps someone knows the answer? Thanks! Jens My code runs:

https://bugzilla.netfilter.org/bugzilla/show_bug.cgi?id=98 netfilter@linuxace.com changed: What |Removed |Added ---------------------------------------------------------------------------- CC| |netfilter@linuxace.com Status|ASSIGNED |RESOLVED Resolution|

Hi, I''m trying to do some horrible private address routing between networks. Is there a way to handle the following? I''m guessing policy routing *might* be the way, but anyway... Two networks, accessible via public addresses -- a /29 on each. Each network, however, has more machines than this, so one also has 192.168.0.0/24 and the other has 192.168.1.0/24. I have an IPIP

After carefull reading (LARTC) and experimentation, I am in a dead end... I am using several IPIP tunnels (linux ipip module, IP protocol 4). I''d like to filter packets going through these tunnes to different classes, on the ingress device, based on source and destination IP _INSIDE THE TUNNEL_. First I tried the nexthdr bit. As explained in LARTC, nexthdr jumps to the next header

Hi! Can I create the unnumbered GRE tunnel with iproute2 utility? Can someone provide me a link/howto/example_config how to do it? The topology is one tunnel between two linux boxes: -- eth1-|__|-eth0 <-------------> eth0-|__|-eth1 -- I''m trying now with: ip tu add tun1 mode gre local loc.IP remote rem.IP ttl 255 dev eth0 ip addr add tun1 0.0.0.0 ip link set tun1 up but it

This is really strange behavior .. root@garfield ~# ip tunnel add testing123 mode ipip remote 192.168.1.1 local 192.168.1.12 root@garfield ~# ip tunnel show .. testing123: ip/ip remote 192.168.1.1 local 192.168.1.12 ttl inherit root@garfield ~# ip tunnel add testingabc mode ipip remote 192.168.1.1 local 192.168.1.12 root@garfield ~# echo $? 0 root@garfield ~# ip tunnel show .. testing123:

I am trying to track down the cause of some errors that have been occurring on a number of our servers using LDAP. We have noticed that when a certain LDAP group exceeds 65 users we begin seeing glibc errors for users in the group. Users that are not in the group do not exhibit this behavior. We have seen this issue on machines running Centos 4.5 x86 & x86_64 with glibc-2.3.4-2.36 and RH4

D'Arcy J.M. Cain If the device is registering and then dropping there are several usual items. The router may be closing the ports on the device. The router may have a AGL SIP helper that is causing issues. Make sure that the device is sending out keep alive packets. Shut down any AGL helpers on the router. Make sure that the site is not double NATing Try using a stun

Hi I am trying to setup an ipip tunnel to another linux router and am having serious problems. A bit of background first though because we may be going at this from the wrong angle. I have a router that runs bering firewall of a CF flash card that is going to act as a gteway for the amateur radio amprnet network. Heres what I need from it- I have an internal network 192.168.1.1 etc and a