similar to: MWI - Config Stupidity or Notify Issues?

Hi, does anyone have the setup for go2call ? I have digium boards and quicknet linejacks and phonejacks. The cards work fine in asterisk without the g729 or g723.1 for the phonejack. I will like to do SIP origination using the codec in the phonejack and linejack g729 or g723 and send the calls to go2call. Anyone has the setup for this ? Or similar setup to a SIP provider using g729 or g723

What's wrong with ARA (asterisk realtime architecture) from voip-info: Asterisk, SER and MWI http://mail.iptel.org/pipermail/serusers/2004-December/013727.html Actually I wrote a patch for this and it supports ast_data too. What you do is tell asterisk that all of your phones IP addresses are your SER machine. Then when a message gets left Asterisk sends the NOTIFY to username at

Hi, Has anyone got MWI to work with SIP phones while using ast_data? I have asterisk setup on one machine which is reading it config from a DB on another machine. Everything seems to work except for MWI... Any successes out there? Thanks. V. _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today - it's FREE!

I am trying to set up the Message Waiting Indicator (stutter tone/light) so that my cisco ata-186 will let my phones know there is a message waiting. However this does not seem to be very well documented. I found this on wiki mailboxnumber@context ... where does that go? Do I put it in my SIP.conf definition for my cisco ata, or where. In my SIP cisco definition i already have a

Hello All, I have Polycom IP 500 phones which I would like to have message waiting indicators on. So far, I have my system running well but the problem I am seeing is that MWI doesn't seem to tell my phone that it should display a MWI state. The light does not show when you have message nor is there any indicator on the text lines of a message waiting. The wiki doesn't cover this

I have a large group of 7960G's running Asterisk 1.2.4 using SIP 7.5. Most of the time the message waiting indicator works fine. Once or twice a day either an MWI is not sent to the phone or the phone misses it. I have not noticed duplicates being sent and I can't figure out the time, if any, a resend is made. Anyone know why I'm missing, loosing or not sending an MWI to the

ok this is a wired problem. when i use X-Lite - after i register with asterisk X-lite sends a subscribe/notify request to asterisk to determine if the account has any messages waiting. if i create a sip.conf account using: user 12345 with a voicemail box 12345 - MWI works user jwolosuk with a voicemail box 12345 MWI fails (gets a 404 not found upon a subscribe) does anyone have a clue why

The 7960's have an envelope that appears in the display next to a line which has voicemail. Also, the MWI light is a logical OR of all the defined lines. Is there a way to tell the phone NOT to display the MWI for certain lines but retain the envelope for all? If you get enough VM on busy lines then the light tends to lose meaning and you may as well have it on all the time! I'm

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

Hi Noah - > I got everything to load via ftp. The phone appears to correctly boot > from the config files. I also put the latest firmware there and the > phone sucessfully loaded it. > > For some reason, the phone and * don't see each other. This is the > part > that confuses me. Any clues as to why the phone won't register? It's not often I get to

On 27.12.18 at 18:14 Joshua C. Colp wrote: > On Thu, Dec 27, 2018, at 1:07 PM, Michael Maier wrote: >> Hi! >> >> I just want to say, that 13.24.1 doesn't fix the problem described in >> the posts above. > > You're going to need to file an issue[1] with traces and actual configuration. > > [1] https://issues.asterisk.org/jira > Before I'm

hello, I read http://www.voip-info.org/tiki-index.php?page=Asterisk+at+large anybody could tell me more about this ? Is it available with ARA ? Regards Harry Method 3 Q: If you have your SIP phones registered with SER but your voicemail is handled by asterisk, how do you get the MWI (Message Waiting Indicator) light to function on the phone? A: In sip.conf create a section pointing at your

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

We have recently pulled an ancient Fujitsu-branded Centigram voicemail system out of production use and replaced it with an Asterisk box, which is now serving as our enterprise voicemail system and automated attendant. The Asterisk system is connected to a Fujitsu F9600 PBX and uses the 1.6.1.x SMDI module to communicate between the two systems. Save for one issue, the replacement of the old

We've been testing (aim:frziegler and aim:end1r) the Voicemail2 app for a few days now, based on a CVS build from Monday, 5/12/03-23:15. Works good! Thanks Mark! We seem to have found a bug in the MWI (Message Waiting Indicator) logic. By simply creating msg0000.txt files in both structures, e.g.: for extension 4000: voicemail1: /var/spool/asterisk/vm/4000/INBOX/msg0000.txt

We are using Bellsouth 8867 phones on our TDM400B FXS lines (asterisk-1.0.3). It has a "Voicemail" light, which appears to be MWI (according to the manual it works with voicemail from the telco that sends a FSK signal). The dialtone stutters when a line has voicemail, so I know that I have the mailbox setting right in zapata.conf, but the light doesn't go on. I am also getting

I have many remote locations that dial into a central server to retrieve voicemail via IAX. Outbound calls are handled as SIP calls from a Snom to a local (to them) Asterisk server that dials the main server thru IAX. I have trained them to check their voicemail via the emailed WAV file, however some of them are, how shall I put it, idiots*, and insist that they *have* to have the MWI indicator

I use a TDM400 card to interface with my telco. I used asterisk voice mail. However, if I'm on the telco line while another call comes in, obviously it cannot go to asterisk voice mail but instead bounces to the Telco voice mail. Is there any means by which I can get asterisk detect the Message Waiting Indicator (MWI) from the telco? Is there some application or variable which can be

I'm trying to figure out how Asterisk decides how often it will send SIP NOTIFY's to an ATA when a voicemail message is waiting for the user on the server. >From watching, it seems to be completely random. Sometimes 10 seconds apart, then 33 seconds, then 13 seconds, etc. Each time causes a "ring" on the ATA. I can change the ATA's behavior, but what I'd really

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA