similar to: CTR21/CTR37 Gigaset phones and GS HT286

Good day! Have a weird problem with HT-286 and Conference room. I use Asterisk CVS-HEAD-06/04/04. Here it is: When HT-286 get into the conference room first and nobody in that room everything seems ok (with any codec HT286 allowed), but when HT-286 get into conference room when somebody already there, have got different HT behavior: 1. When HT use GSM codec => it connects to conference room,

Hi, I'm using Asterisk 1.2.18 on a Debian Etch box. I've noticed a very strange fact which causes a bad prob. When I get an inbound call, I make 4 phones ring at the same time, one is a Snom while others are Gigaset C450IP with _latest firmware_. When I get a call and answer with the Gigaset, a second call going to voicemail makes the first call received on the gigaset C450IP stop

Hi, It seems to me that DECT Gigasets do not support MWI when connected to a Polycom/Kirk DECT base station : when a new message is dropped into user's mailbox, I can see a NOTIFY message sent by Asterisk to Polycom/Kirk DECT base station (here a KWS300) but Gigaset's handset MWI remains unlit. At the same time, a Polycom/Kirk handset subscribed to the same base station would turn its MWI

Hi list, Before purchasing a number of Siemens DECT SIP phones, the Gigaset S675 IP, I read that the problems with MWI had been fixed with the latest firmware version (see http://www.voip-info.org/wiki/view/Siemens+Gigaset+S675IP). Now I'm not so sure that's the case. After setting up a network mailbox for one of these phones, as well as an Asterisk voicemail account (ext.

When you configure the Siemens gigaset handsets (I have S685IP), there is a single option for all handsets to use either the POTS interface or VOIP as the default outbound destination - you then need to add a dial suffix if you want to use an alternate outbound route. Does anyone have any suggestions as to how to make just *one* of the DECT handsets only use the POTS but others default to

2008/10/5 robert.boardman at gmail.com <robert.boardman at gmail.com> > Kevin P. Fleming wrote: > > Olivier wrote: > > > > > >> 2. R Hook-flash key is now available to transfer calls. > >> In s450IP web management server, its defaults settings are : > >> Application-type: dtmf-relay > >> Application-signal: 16 > >> >

I've just ordered a Siemens Gigaset C450 IP cordless IP/DECT phone, given that it's supported by asterisk http://www.voipuser.org/review_41.html However, I see that a slightly better Gigaset S450 IP is available for only a slight price premium. Are there any user experiences with the S450 IP? -- Eugen* Leitl <a href="http://leitl.org">leitl</a> http://leitl.org

Hi, Searching this list archives, I couldn't find a definitive answer to my question : how to send SMS to Gigaset phones ? My goal is to send Alert SMS such as "This phone system will be stopped in 5mn for maintenance" to every terminal (SIP phones and Gigaset DECT phones). (So at the moment, I'm not looking for way to send SMS from handsets). I could successfully send 1 short

Hi, I know this is a little OT but there are many Asterisk users of the excellent Siemens DECT/VOIP phones like the S685IP and 475IP and this is probably newsworthy for them. One of the biggest bug bears has been no mute function on the handset. When I woke up this morning, the handset told me there was a firmware update. I updated and then visited the web site to find out what had been

Hi, My Gigaset S450ip allows 2 simulatneous calls when each incoming call are targeted to different phones. When both calls target the same extension, the second one is forwarded to voicemail. I couldn't check yet SIP messages but has anyone met this limitation (one simultaneous call per phone) ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hy all of you, Is anybody has a tutorial for integrate a siemens gigaset as180 and connect it to Asterisk. I've searched a lot and didn't found something concluding. Regards -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.digium.com/pipermail/asterisk-users/attachments/20110611/17522d7a/attachment.htm>

Hello, My goal is to provision C450IP or S450IP models. Has anyone a hint to provision them from configuration files ? Usually, we use dedicated menu embedded inside Gigaset handset. An http server also exists but I couldn't find any dhcp-tftp combination to configure them. Any clue ? Regards -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, With my Gigaset C470IP (with latest 02223 firmware), I can't find a way to access SMS settings from web configuration app or using a handset. Has someone been more successful without using auto-configuration mode ? (For instance, manual says an SMS entry is showing on handset screen but as I plugged my base station into a private LAN, I skipped the whole auto-configuration process ).

Hi, Is anyone aware of an issue with Gigaset DECT handsets (R630H and N510P) and Asterisk? A client has them, and whenever they try a blind transfer, something goes wrong. Agent 1 starts and completes the blind transfer. Agent 2 answers the transferring call. Agent 2 hears asterisk music on hold, but the caller can hear the agent. Any ideas? Thanks Dan Journo Kesher Communications (UK)

For some unfathomable reason, Siemens USA doesn't offer the Gigaset IP range in the U.S. I'm particularly interested in the Gigaset S685 IP. Since it's DECT 6.0, and there's an English (UK) version, I'm thinking it should work just fine, after dealing with the walwart issue (and maybe caller ID signalling). Anyone imported one from the UK and using it in the US? for how

I've dealing with this issue for a while, and I'd really like to know if anybody has experienced the same pain before :-) I've a lot of Grandstream HandyTone 286, loaded with the latest firmware (1.0.8.16) from the GS website. In my sip.conf, this ATA's are configured as: [05] type=friend username=05 secret=XXXX callerid="User 05" host=dynamic nat=yes qualify=yes

I've had a few problems with my system holding the line after a call has been made, just now I rebooted and noticed the following in /var/log/messages Aug 13 17:23:15 Sheriff kernel: wcfxo: DAA mode is 'FCC' in the file wcfxo.c the following structure is initialised as below which would suggest that FCC is wrong for France or pretty well all of Europe. static struct fxo_mode {

Hi there, in case anyone is interested, I've just taken ownership of a small home network (3 handsets) of the brand new Siemens DECT PSTN/VOIP phone. It works great with Asterisk. Here's my overview and review so far... http://www.theopensourcerer.com/2008/04/27/siemens-gigaset-685ip-phones/ Cheers Al -- The way out is open! http://www.theopensourcerer.com

hello, I would to define and unattended process to configure devices which are http-server-enabled, use DHCP but do not use TFTP-DCHP to configure themselves during boot. Has anyone worked on such subject ? I was thinking of something like : populating configuration file from device web pages (rendering this as generic and flexible as possible) writing a script which reads this file and set

I'm running chan_capi on a number of systems in France, France Telecom offer the possibility of having the caller's name, but say we must configure for EuroISDN+. Google doesn't show much and the best I could see was in Dutch. Any Europeans solved this one? Rgds -- Dave Cotton <dcotton@linuxautrement.com>