similar to: Cisco 7960 SIP V6 and IBM A30P Fedora Asterisk

I am new to asterisk and need to dig up some info on how to set it all up. It looks a bit daunting especially all the options available in the .conf files. I have 2 SIP phones, GXP2000 and a budgettone 100. phone1 - 192.168.0.160/24 extension 1000 phone2 - 192.168.0.161/24 extension 1001 Server - 192.168.0.57 I get the following all the time, but can make calls between the 2 extensions,

You are reading the instructions for the STABLE 1.0 version of asterisk and are using the CVS version. Goto the wiki and read the instructions for RealTime. -Matthew ----- Original Message ----- From: "Muhammad Rizwan Khan" <rizwan@advcomm.net> To: <Asterisk-Dev@lists.digium.com> Sent: Wednesday, January 05, 2005 12:42 PM Subject: [Asterisk-Dev] Asterisk with MySQL >

I've been googling and talking with Libretel about my setup and the fact that incoming calls to my asterisk box through the Libretel number reach my box (I hear the greeting being played) but then don't accept DTMF. Here is a rough diagram of my setup: Asterisk | server | NAT <------------ Libretel | router | Note that there are NO SIP

Anyone help me here? I am a newbie so be gentle ;-)...... It worked once and then I played with the configs. I have a static IP address which is on my private network.. Phone is 192.192.192.220 and asterisk server is 192.192.192.22 I have the 7690 with a SIP iamge (Whatever latest is ) I have 3 lines setup with Free World Dial up and have the 4th setup to connect to my asterisk server. Here

Hi everyone, I've been toying with * for quite some time now. I've got two Cisco 7940's with the SIP firmware playing nice with *. I can also make outbound calls via IAXTel (toll-free calls only) and all other calls I have routed out my X100P-clone adapter. Here's my question... Is there a way to capture the inbound callerid from my phone line (coming in on the X100P) and have

Anyone have an example XML file for the PAP2T? Cheers, j

Using svn trunk, I was trying to see what the astdb entry in the sip.conf file does. Nothing :) I presume that it's meant to create an entry in the astdb. so, I have astdb=chan2ext/SIP/grandstream1=1234 in sip.conf But database show only gives *CLI> database show /SIP/Registry/706 : 192.168.0.200:5060:3600:706:sip:706@192.168.0.200:5060

Hi, to register my Asterisk with a SIP provider I use the following syntax, as shown in the default sip.conf: register => 2345:password@sip_proxy where [sip_proxy] type=peer context=from-messagenet host=sip.messagenet.it port=5061 <------------- please note this one!!! 5061 is provider's port I have to register to. This also would work for me: register =>

I want to setup a blind transer for auto forwarding to SIP peer. I have context forwarding looks like this in extension.conf [forwarding] ... exten => 511,1,Dial(SIP/sip_proxy-out) ... This will do the re-invite, which is attendance transfer maybe. But I want a blind transfer by REFER method. How can I do that? I know that the transfer() function may be able to do that. But I don't know

sip.conf.sample: ;register => 2345:password at sip_proxy/1234 ; ; Register 2345 at sip provider 'sip_proxy'. Calls from this provider ; connect to local extension 1234 in extensions.conf, default context, ; unless you configure a [sip_proxy] section below, and configure a ; context. sip.conf: [general] context=default allowoverlap=no udpbindaddr=0.0.0.0 tcpenable=no

Thanks But how about the config files (SIP...) that needs to be inside the tftp server, where can I get a sample of that? That's where the images for the firmwares of the ip phones come from, on boot right? -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Alen Salamun Sent: Wednesday, January 26, 2005 5:47

Hi, all. The asterisk setup is working fine, receiving calls via broadvoice "initially". ? When call comes in via broadvoice number, asterisk picks it up and routes correctly, as long as the call came in within ~2 min from the previous one. In other words, as long as a call comes in within ~2 min since the previous one, asterisk will answer the call. However, if the call comes in

I am running asterisk 1.0.1 with OH323 compiled in. We have a 323 trunk to CallManager with a mgcp controlled pri router. When using sip phones (directly registered with asterisk) to call out the 323 trunnk to PSTN, calls timeout after 3 rings. If I answer b4 3 rings - no problem, otherwise I get "no one is available to answer at this time" on the consoel and it redirects to an

Hi, I have been trying to configure my Asterisk to use a Sip provider for out and incoming calls. I only have one user and password for connect to my sip provider. My sip.conf is: [general] ;disallow=gsm ;allow=ulaw port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context = default ; Default for incoming calls callerid=No

Dear Opus family, we have implemented the Opus codec at a Texas Instruments DSP C6418. It is working fine! Does anyone has experience with the configuration of the codec for a speed optimized implementation on that DSP? At the moment, we use the following settings: #define NONTHREADSAFE_PSEUDOSTACK 1 #define FIXED_POINT

Hello fellow asterisk people! I have Asterisk listening on port 5061 and SER on port 5060. Asterisk is configured as a gateway for ISDN/Analog/H323 and also SIP. My problems are with SIP. I can make incoming calls from SIP to asterisk and to any of the other networks, but when I try to make an outgoing call from Asterisk to SER I see the following in Asterisk: -- Executing

Hi Jean-Marc, thank you for that suggestion! It seems that the file "fixed_c6x.h" is not part of the Opus sources, so the compiler cannot find it after enabling the TI_C6X_ASM config option. Maybe it was only part of an early version of the Opus sources? I looked for the file in versions V1.1, V1.1.1, V1.2alpha and V1.3 but did not found it. Do you have an idea, where I can get the

Hello, I try configuring Quintum DX gateway as link to PSTN for *. Now, I can dial number which is connect to Quintum, and call is diverted to *. I don't know what I should set, if I want call from SIP_phone registred in Asterisk to PSTN via Quitnum. I set in sip.conf account for Quintum [sip_proxy-out] type=peer outboundproxy=QUINTUM_IP , and changed extensions.conf. When

Hello! I've been struggling with the documentation for months on this simple subject... I still have not been able to get this concept down... I have 3 sip accounts (PSTN DID's) that come into my asterisk box and give me phone service from my itsp via SIP. I for the life of me have not been able to figure out how to get them to come in to 3 seperate contexts! This must be simple but I

Hi Jean-Marc, Alfred and Greg, Are you receiving the mails from IETF about draft-ietf-avt-rtp-speex The mails are not coming from AVT mailing list, but I think we are all 3 part of a minimal list (draft-ietf-avt-rtp-speex at tools.ietf.org) dedicated to latest discussion about the draft. I have answered some questions, but there are small changes and adaptation still required to the ietf