similar to: Re: asterisk echo problem ever go away???

Thank you for the suggestions Andrew. I have not come across some of them before and will give them a shot. Based on my reading, changing the motherboard should have minimal impact unless that motherboard and the TDM400P don't get along (aka. IRQ sharing). I have disabled everything that is not needed and I do not believe I have any IRQ problems and I am NEVER wrong ;). Calls are crisp and

Hello, I am looking into building a workstation using Xen to host several operating systems. Looking at the pci passthrough requirements of Xen4.1 on the VTdHowTo<http://wiki.xensource.com/xenwiki/VTdHowTo>page, I am a little puzzled with the fact that only Intel Core2Duo (with VT-x), Core2Quad, i7 and Core i5 (vPro Brand) CPU''s are supported while motherboards with the i55x0

dude it's gotta be something with your system. Im using same setup at home with a TDM22 with no probs. Asterisk@Home 1.5, Compaq Deskpro EN P3 500, cordless phones. You did a ton more than I did, I basically plugged everything in and installed a@h.Worked first try. Hate to say it, but would it be possible to try a different system? Even an old system as long as it is PCI 2.2. The big clue

My * is presently running fine on Mandrake 9.2, but Ive been entertaining moving to Mandrake 10.0 to enjoy the obvious improvement in kernal speed Im seeing on other 10.0 boxes Ive recently built for other applications. (10.0 is the first implementation of the 2.6 kernal) Any comments from anyone who's running on 10.0? IS anyone running * on Mandrake 10.0? If so, any issues stand out?

I admit I was scepticle of this suggestion - but it actually seems to have worked. COmpiling a straight GENERIC kernel with KDB and DDB included do seem to have made my irq22 interrupt storms go away. Certainly I have spent some time trying to provoke the problem and not managed to make it read it's ugly head again. The thing is though, this doen't make me particularly happy - as I am

After contacting Asus, MSI and Gigabyte, this is what I got back. Only motherboards with the QXX chipsets and certified with the Intel VPro support the Vt-d virtualization technology. I''m not sure about MSI though, because this is what I got from their support: "Almost board could support. Please refer to our website, http://www.msi.com/product/mb/." The problem is that

My OQO boxes have the AR5413 wifi chipset, so for the first time in quite a while, I again need to run madwifi. So I went looking for the dkms madwifi rpms, but could not find them. They use to be on rpmforge, as I recall. dkms is there. So have I lost some memory cells or have these rpms taken a hike?

So, having returned from a month's vacation, I'm back to work on attempting to build a set of small form factor CentOS compatible computers. I've really tried to do my homework, but this doesn't appear (at first glance) to be at all easy. It's not made easier by the fact that I have to get it right the first time (and I haven't built a PC in a decade); the time and money

Hey there, What recommendations does anybody have as to motherboards known to work well with the Digium TE110P T1 interface cards and the TDM400P analog POTS interface cards? We currently make use of the TE110P for our T1 (esf w/ b8zs - not a PRI) and have experienced many issues caused by our PBX's motherboard. Additionally, we built a server to become our new PBX, but that machine runs

I came into this with my eyes wide open. I have read ABSOLUTELY EVERYTHING there is to be found on the net about avoiding echo problems BEFORE I even attempted to create a production system. Since lots of people are apparently using this in production environments now I just assumed that echo IS avoidable. As others have recommended, I created a test system with the proposed production

I would appreciate if people that have experience with stable Asterisk and TE405P cards installations on Xeon servers can share what kind of motherboards and chipset are using. I'm trying to configure a new Asterisk server with one TE405P on an Intel board with Xeon 3.0Ghz but not all Intel boards and chipsets works fine with these Digium boards. Thanks for your help ! Alfred Certain

It's time to purchase hardware again, and I'm going through the usual "of that which is on the market, what will CentOS run without leaving new hardware collecting dust for a year"? I'm looking at a number of commodity-grade machines (ie: desktop grade will suffice) with reasonably fast CPUs and able to use at least 8GB each (preferably 32GB). These will be deployed as

What socket AM2 motherboards out there work well with xen (i.e. support > 4G ram, sata and lan chipsets work). I''m looking to probably run one of the lowpower Athlon 64 X2 4200''s in it. I''d also like to see atleast 4 ram slots. Anyone have any recomendations? Thanks, Doug _______________________________________________ Xen-users mailing list

OK looking for some constructive critiuquing and ideas. This is just a ruff draft 1. First we need to know what type of graphics card you have. Please do the following at the command window. To get to the command window do the following [root at nVidia ~]#lspci -v "note the difference in board manufactures." These drivers will work on all Aftermarket

Hello all, Anybody know of any good and reliable AMD AM2 socket motherboards with SATA chipsets that support NCQ such as SIL3124, NForce 570 Ultra and offer six or more SATA channels?

While I wait for the Xen 3.0 Test CD to download, has anyone has luck using an Asus M2N32-SLI Deluxe motherboard (NVIDIA nForce 590 SLI MCP chipset)? The CPU is an AMD Athlon64 X2 3800+ AM2 w/ 2GB DDR2 533. The motherboard mostly works under Gentoo using kernel 2.6.18 with the "noapic" kernel boot option in my grub.conf file. The only major issue with the Gentoo kernel

Hello, I'm using Isolinux 3.11 to make a boot image with a variety of 2.6 kernels. I have two Intel-branded motherboards with i915 and i945 chipsets that have trouble booting with menu.c32. If I load the image from the isolinux commandline with a set of append parameters, it works. The same settings loaded from the menu.c32 causes the kernel to load and promptly hang. All I can tell is

I have 2 new boxes that I cannot use yet because of problems supporting these newer chipsets in 5.1. Does anyone know when the CD version of 5.0 x86-64 that has support for these chipsets be available on any on a Centos mirror? Has the support for these chipsets been added to yum yet? Here are my latest results with these chipsets and Centos 5.1 1. Asus P5K, E6850, P35 Chipset: Does not

Following the tutorial app in Agile Rails, I''m trying to figure out the best way to get the flash notice to go away after an "Invalid product" is selected (eg. when a new, valid product is selected). This is after Task D, Chapter 9, in the 2nd Ed Beta. I''ve come close to getting to work right, but I think I may still be missing something in the control flow of

http://bugs.freedesktop.org/show_bug.cgi?id=16433 Summary: Text don't go away on redraw Product: swfdec Version: unspecified Platform: x86 (IA32) OS/Version: Linux (All) Status: NEW Severity: normal Priority: medium Component: library AssignedTo: swfdec at lists.freedesktop.org