similar to: MWI on Grand Stream ATA-286

I am trying to set up the Message Waiting Indicator (stutter tone/light) so that my cisco ata-186 will let my phones know there is a message waiting. However this does not seem to be very well documented. I found this on wiki mailboxnumber@context ... where does that go? Do I put it in my SIP.conf definition for my cisco ata, or where. In my SIP cisco definition i already have a

Does anyone know if the 'externip=' in sip.conf is resolved just once at startup or on an on going basis? I would like to use a DNS name through one of the dynamic DNS providers, but if the DNS updates, and asterisk continues using the old resolved value, this could get tricky. Thanks, Dennis

Hi, Would anyone know of a way to set the time automatically on an ADSI capable phone from *? The phone in question is a Aastra 480e. While I am at it, does anyone have any helpful docs on the ADSI script programming? I have managed to do basic functions by modifying the asterisk.adsi file using stuff gleaned from the app_adsiprog.c file, but docs would be really helpful at this point. Tia,

Hi List, Just received a HT-286 Analog Telephone Adapter. This device is allows the user to take a standard analog telephone set and connect it to a VoIP/SIP based gateway. A low cost way of having PSTN devices make use of VoIP/SIP services. For example you could take a credit card processing machine and punch it into a location where you have broad band access. You could take a FAX

Somone in europe have had succes getting Callir ID showed on a phone screen conected to an Handytone 286 ? Adri? Vidal -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: text/enriched Size: 235 bytes Desc: not available Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20041124/e5514052/attachment.bin

Hi people, I would like to read your suggestions as to where the issue might be. ATA286=Grandstream Budgetone ATA 286 in SIP mode. One Lan Port and one FXS port. TDM04B= 4 FXO signal fxls There is a 8FXO-to-SIP unit in this scenario that works perfectly so i will not make mention of it. PSTN----VOIPprovider---Internet---ATA286------tdm04b---Asterisk1.2.-13 Asterisk is being used as a meetme

I'm considering a situation where I buy about twenty ATA devices. I've played with the Linksys / Cisco PAP2T, and got that working fine with some inbound and outbound faxing. The web GUI was okay. I'm seeing prices around $45 to $50 for this thing. It comes with two FXS ports, but I only need one FXS. I've seen the Grandstream Handytone 286 online. It looks promising as an

Hi all, Configuration: Analog phone connected to TDM400p. I'd like the phone to give a half-ring (chirp) periodically when there is a message waiting. Can this be done? How is it configured? The visible "Message waiting" indicator and the stutter dial tone are working fine, but are not sufficient for me. Thanks!

We've had several customers report since upgrading them to our new Asterisk 1.6.2.17 server (from version 1.4), that their MWI no longer works. No significant changes have been made to their SIP configuration, nor to their ATA configuration. While not exhaustive, these are the ATAs that don't work: Linksys SPA2102 Linksys PAP2T-3.1.15 Thomson 780 Thomson 784 Unfortunately, this

Last week I asked about MWI indicators on wireless phones that would work with Asterisk. I sent a message off to Panasonic asking them about it because in their ads they specifically stated that the indicator works with and requires phone company voicemail subscription. The is the model TG5631. Specs here... http://www.amazon.com/Panasonic-KX-TG5631S-GigaRange-Cordless-Answering/dp/B000F4C2CA

I'm trying to figure out how Asterisk decides how often it will send SIP NOTIFY's to an ATA when a voicemail message is waiting for the user on the server. >From watching, it seems to be completely random. Sometimes 10 seconds apart, then 33 seconds, then 13 seconds, etc. Each time causes a "ring" on the ATA. I can change the ATA's behavior, but what I'd really

All, I'm using Asterisk 1.6 and using Polycom 500's with SIP firmware 2.1.3. I can not seem to get the Message Waiting Indicator to work reliably (and in my opinion correctly) with voicemail. I've got the following in my phone.cfg: <reginfo> <msg msg.bypassInstantMessage="1"> <mwi msg.mwi.1.callBack="*97"

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> <meta http-equiv="Content-Type" content="text/html;charset=ISO-8859-1"> <title></title> </head> <body text="#000000" bgcolor="#ffffff"> <blockquote type="cite"><br> <pre

Good day list, I have a problem with ATA Handy Tone 286. It has been unsuccessfully downgraded via HTTP. Seems like during downgrade there was a problem with connection, because now it's not responding at all. There is no way to get to it's voice menu via phone (by pressing button on it). The button is just flashing ... Could anyone suggest any way to bring that device back to life.

I'ld like to test SMSes between Asterisk and an analog phone on a GS-ATA-286 (SIP). I have spent many hours trying any exemple on voip-info or mailing-list, but no message got sent from the analog phone. My goal, at now, is to send SMSes locally from and to Asterisk. Does anyone have a working configuration ?

I have Asterisk voice mail setup locally. It works great, I'm impressed! Some details about my system: I'm using a TDM22B card to interface with both the PSTN and a VOIP provider. I'm running 1.2-beta from CVS. I have a regular VTech phone plugged into one of the FXS ports. Asterisk is able to indicate when a local voicemail message is waiting via the LCD display of my analog phone.

After purchasing the Uniden TRU9480 and then the Panansonic 5672, both of which do not have "phone company" compatible FSK/stutter MWI, I finally got smart and found out just which Panasonic phones have this feature. Only the following 5.8G models in their current line have FXO compatible MWI. I purchased the 5771 unit and one remote. I have confimed it does in fact work with Asterisk

The only way I could get rid of the err for gsm on launch was to copy libgsm to my DDO folder, even those I use DYLD_FALLBACK_LIBRARY_PATH, and libgsm is in all of those locations. Here's my launching script&#058; Code: on run --edit this to be the correct location and file to run (typically only edit after the "drive_c") set toRun to

UBUNTU 10.10 AMD64 Latest updates with recompile wine 3.1.7 after an ia32.lib upgrade. Returning to looking at GMAX. As things stand now, when you try to open the materials navigator the program posts an error, allows you to do a save, and quits.

I use a TDM400 card to interface with my telco. I used asterisk voice mail. However, if I'm on the telco line while another call comes in, obviously it cannot go to asterisk voice mail but instead bounces to the Telco voice mail. Is there any means by which I can get asterisk detect the Message Waiting Indicator (MWI) from the telco? Is there some application or variable which can be