similar to: asterisk T1 question

Does anyone know of an easy to install/use WIFI PCMCIA card for Linux. I am currently running Cent OS 4.0 on my laptop and I have a D-Link DWL-G650 Ver B which will run off of the madwifi Beta drivers. Now I know I can get this to work but I would feel a little better using software that is in production development. Any suggestions and input would be helpful on my new card purchase. The card

Hello I am looking for a way to have snort to dynamically update my shorewall config. I have seen software out there but I would like to see if anyone had tried this first. Aslo I would like to know if there is a way clear the Netfilter tables when I do a shorewall restart. The reason being is that when I make a change to my firewall setting I want all connections to have to re-establish

I am looking for a location where I can get tripwire to install and update via YUM. I know this is not the most secure thing but with the amount of machines that I have, I have not other choice. So far I have found http://download.fedoralegacy.org/redhat/9/updates/SRPMS/ Does anyone know one for CentOS? Thanks ---------------------------------------------------------------------- This mail

Hello All, The problem I'm facing is the following: two machines that require analog signal. However, connection to the world is setup as follow: T1 connection to Asterisk server Any suggestions on how to convert digital signal to analog? Type of card on my Asterisk server is wct4xxp Thanks for your support! Motty -------------- next part -------------- An HTML attachment was

[[1]]              [,1]      [,2] [1,]  0.003632559 0.2190629 [2,] -2.090772847 0.2190629 [[2]]             [,1]       [,2] [1,] 0.004278991 0.04337005 [2,] 0.190723602 0.04337005 [[3]]            [,1]        [,2] [1,] 0.01237827 -0.01544811 [2,] 0.06452200 -0.01544811 g<-c(1,2,3) function(g,hessianList){    for(i in 1:3){          ft1<-g[2]*hessianList[[2]]          ft2<-sum(ft1)   

Can I configure an Adtran channel bank with a mixture of FXS and FXO cards and have them come into a single T100P T1 card? It seems like this would be a cheaper solution than trying to load a bunch of PCI cards into a PC. Also, when shopping for an Adtran (on ebay) - what do I need to watch out for as far as interfaces or capabilities to make sure that it works with a Digium card?

I cannot get incoming calls to sip phones behind a PIX to work, outgoing is fine. Asterisk (Public IP) --> Internet --> PIX (NAT) --> Sip Phones I have tried no fixup protocol sip, I have punched a hole in the Pix allowing anything from the Asterisk box into the network, still no incoming. I have done all the Wiki suggests in regarding to NAT. Is their a trick getting the

Hi, I asked this last week but i didn't get any answer So i will elaborate on my question. I need to setup a pix 515 firewall (running 7.2.2 OS) to allow sip traffic thru it from a sip phone wherever i may be. The pix is where all my servers are colocated and i will need to connect thru it from softphones / hardphones wherever i happen to be traveling. I need help setting up the pix for

Hi, I have about 10 Cisco 7960s behind a PIX 506E (IOS v6.3) firewall. After some period of time, asterisk says that some of them are unreachable, and the phones lose their registration. The only way to make the phones recover is to clear the NAT translation tables for the phones on the PIX (clear xlate...) Does anyone know how to fix this? As you can imagine, it is quite annoying. And it does not

Hi, We have a shorewall firewall running on SUSE 10. We have three nic''s, Lan, DMZ and Internet. We also have a Cisco Pix 506e. We moved from sending all our traffic through the pix to using the Suse box yesterday. The PIX is in the DMZ, with a connection to the LAN switch, the idea being that VPN users can connect to the pix to the lan. The Pix is on the 10.0.1.x subnet, the lan is

This is kind of an odd request so I''ve got the asbestos undies on. I have a client who currently has a layer 3 switch plugged into a cisco pix. Routing is handled via RIP and now the client wants to insert a linux box running shorewall behind the PIX and in front of the switch to act as a content filter+backup firewall. The immediate problem I forsee happening is that RIP broadcasts to

does anyone have a sip working through a cisco pix firewall? i can get the phone to register and the call to be negotiated, but as soon as the call is answered there is no sound and the call ends immediately. im sure this is due to the RTP negotiation being rejected by the pix. any helpful ways around this? right now my only solution is to put a small box outside the firewall and IAX the

Hello, I am not too familiar with the settings in our PIX (learning though). Here is the only access-list setting that we have in place for Asterisk: access-list acl-prod permit udp any host EXTERNAL_*_IP_HERE eq 5060 In rtp.conf we are allowing ports 10000 - 20000. We are not using SIP Fixup in our PIX due to firmware version. How do I go about adding the ability for udp ports 10000 - 20000

hey friends, I am looking for a free open source software (web based or application) through which I can monitor the Pix Firewall. What it should show Interface status or traffic , VPN Connectivity status, CPU Status, Memory Status etc. I am also running DHCP server on Pix Firewall (due to some reasons) If it can monitor that also means showing how many IPAddresses has been assigned, to whom,

In my * server I have a T100P, connected with a T1 crossover cable to an Adtran TA750 with 2 FXO cards. After I do 'modprobe wct1xxp;ztcfg' the alarm on the card starts blinking red. Running zttool confirmed that yes, it is a red alarm. I've read a few previous posts on this type of setup and I'm not too much closer. What should I be checking next? A different cable? The

Hello, long time lurker, first time writer.... We have the following set up ITSP | | Internet | | Cisco 2600 | | Switch----Asterisk Server running 1.0.9(has public ip) | | Cisco 515e Pix Firewall running Pix OS 5.3(run's a class c 1-to-1 nat and pat) | | Grandstream GXP-2000(run latest fw from grandstream site 1.0.1.9) The grandstream registers with the public asterisk server fine. I even

Can anyone point me in a good direction for configuring SIP through a PIX using 1:1 NAT. I have read anything I could get my hands on and tried them all with very little success. I can get it to work through the cheap little cable modem routers, but not this PIX. I -can- make a direct SIP call using the IP address of the * server (ie.exten@ipaddr), but when I do that * still doesn't

We are in the process of preparing to move our Asterisk server to a Digital T1 interface card instead of a analog card (via an Adtran which is now connected to the T1). I did a preliminary test the other day and hooked the T1 line up to the T1 card, bypassing the Adtran. This worked rather well I must say. The two issues I ran into are: 1) Caller ID is not working even though I enabled

Hi, I have the Cisco PIX 506 firewall right in front of the asterisk and I am getting a one-way audio. I need your help/guidance to resolve this problem. I have the "fixups" disabled for SIP in the Cisco PIX 506. Any help rendered by you in this subject is greatly appreciated. I have been breaking my head trying to resolve this problem for more than one month. I have included the

Is there anything special that anyone here has had to do to get an Aastra phone (on the Internet) to talk to Asterisk behind a PIX firewall? Ports 10000-20000 UDP are open on the PIX and forwarding to the Asterisk server. The Asterisk server's RTP.CONF is set to use 10000-20000. The phone registers, and will place AND receive calls, however, no audio is passed. The phone is an Aastra