similar to: mediatrix 1204 hysteria

I am attempting to use a Mediatrix 1204 to interface to multizone paging from Asterisk. I have 4 different paging interfaces and want to connect each of those 4 to an FXO port on the Mediatrix. The desired result is to be able to issue some SIP dial string from asterisk, seize the FXO port on the Mediatrix and then have a speech path. I am able to place calls over the Mediatrix when it's

I'm having a problem getting outbound trunking to work using asterisk and an external SIP FXO. 7 digit dialing produces the following output: -- Executing Dial("SIP/mitel-fe17", "SIP/5925660@mediatrix-1204") in new stack -- Called 5925660@mediatrix-1204 -- SIP/mediatrix-1204-645e answered SIP/mitel-fe17 -- Attempting native bridge of SIP/mitel-fe17 and

Dear Group, I have been able to configure my Asterisk BOX to receive calls from Mediatrix 1204. I'm having problems sending calls out via my Mediatrix unit. The SIP Invite is sent to the Mediatrix but the Mediatrix unit sends back a Status : 480 Temporarily Unavailable. This is my configuration on Asterisk; exten => _78996.,1,Dial(SIP/${EXTEN:5}@192.168.6.52) exten =>

I bought a couple of Mediatrix 1204's a few of months back. (Perceived advantages were relatively low overall cost and size per port, and it isn't nearly as vibration sensitive as a PC would be.) Rich Adamson's review from Feb 1 is comprehensive, and the only thing I'd like to add is this: One "feature" of these units that absolutely infuriates me is its behavior for

Gonzalo, I have an APA III-4FXO and I tried using your configurations, I received the message below: -- Executing Dial("SIP/2010-edfc", "SIP/2217008@Mediatrix") in new stack Sep 6 16:54:51 WARNING[1192491824]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x814bf0c (len 774) to 192.168.199.5 returned -1: Operation not permitted -- Called 2217008@Mediatrix Sep 6 16:54:54

Hi all, Please excuse my newbie status I need help in configuring a mediatrix 1204 PSTN gateway with asterisk. Basically each FXO port is configured with a SIP username and automatic transfer extension, which should transfer incoming calls to an asterisk extension. I created extensions corresponding to the FXO port SIP usernames. Port 1 - SIP username - 21383396 - call forward to - 300

I added those lines to my configuration, and i just see with ethereal that my client dial and the 1204 led turn on and they started to interchange packets, im newbie with asterisk i have been trying another sip server with mediatrix that work so well, but i dont know how to set it up? could u send me all the configuration i need step by step? ----- Original Message ----- From: "Wojciech

Many thanks for that info! > Peter > > One thing to consider if you only have 3 PSTN lines is the Sipura > SPA-3000 (you would need 3 of them, one for each line) > > We have 2 PSTN lines at our scout campsite, and they work very well, as > well as providing a simple power outage solution. > > They retail about ?80 + the VAT > > I can supply more information

Product Review Mediatrix 1204 4-Port SIP FXO Gateway Firmware: v2.4.10.69 - US Version US Retail: ~$750, Street Price: ~$450. The Mediatrix 1204 SIP FXO gateway is equipped with four RJ11 pstn jacks and one RJ45 Ethernet jack on its rear panel. It terminates the four pstn lines in either Loop Start or Ground Start mode, handles incoming CallerID, and generates either Dial Tone (back towards the

I have the user manual, I'll send it to your email tonight when I'll be in my home. I have an APA III-4FXO too, until today I can't put it to work with asterisk. Kind regards, Miguel Date: Fri, 03 Sep 2004 16:07:59 +1000 From: Jamie Carl <geek@j-code.net> Subject: [Asterisk-Users] Mediatrix APA III-4FXO (or 1204) help. Anyone with user manual? To:

i'm new here and i need help on how where can i get software version 4.0.x of the mediatrix and how can i install it... mediatrix unit im using has a software version of 2.4.9.57. i would like to use H.323 not SIP... please need help asap!... hope to hear from anyone of you soon.. thanks in advance! ------ eder _______________________________ Do you Yahoo!? Win 1 of 4,000 free domain

Dear Group, I have my Asterisk box working with a Mediatrix 1204. I have 2 questions; 1) I do not seem to get a Call ID on the call coming via the Mediatrix 1204. I was wondering if anyone had this configured and if they could share this with me? 2) How do you route a call based on caller ID on Asterisk. At the moment I'm routing calls via DNIS. Thanks and Regards Shad Mortazavi

Anyone had any good/bad/otherwise experience with the Mediatrix 1204 Sip FXO 4-port gateway? The archives tend to suggest the box is not very straight forward, and possibly lacks some basic pstn interaction features. Thinking about trying one in place of a pair of x100p's (functioning fine now). CallerId, etc, supported on this gateway? Rich

Hi Sean: My name is Maribel Ronquillo, right now I'm working with VoIP products like snom IP Phones, sixpert, sipura and mediatrix. I have had some doubts about the setup of the last product, is a Mediatrix 1204 gateway, and I don't know how to setup de SPEED DIAL of it, I have the administrator Manual but I doesn't help much. Do you have any other information about it that could

Hello! We are located in the UK, and we are planning to replace our old pbx with an asterisk based pbx. For outgoing calls our present pbx is connected to three PSTN lines which all have the same number. Internally, the pbx caters for quite a few extensions, and each extension can make outbound phone calls. Only very rarely does our call volume exceed three simultaneous connections (inside to

-----Mensagem original----- De: miguel@amplanet.com.br [mailto:miguel@amplanet.com.br] Enviada em: quarta-feira, 11 de agosto de 2004 16:31 Para: 'asterisk-users-admin@lists.digium.com' Assunto: Asterisk --> Mediatrix 1204 --> returned -1: Operation not permitted (tethereal) Capturing on eth1 2.738748 192.168.199.4 -> 192.168.199.5 SIP/SDP Request: INVITE

Has anyone been able to get one of these boxes to pass on the caller ID to Asterisk? When an incoming call comes through, softphone and hardphone only display "pstnline1" or whatever you name the ports in the device. I'm looking at having about 8 incoming lines and I was thinking 2 of these Mediatrix boxes would do the trick.

When I try to make a call using the Mediatrix 1204 is showed on the CLI: -- Executing SetCIDNum("SIP/2009-4df1", "1111") in new stack -- Executing Dial("SIP/2009-4df1", "SIP/2217008@192.168.199.5") in new stack Aug 11 15:14:10 WARNING[1211108144]: chan_sip.c:590 __sip_xmit: sip_xmit of 0x81 40c5c (len 794) to 192.168.199.5 returned -1: Operation not

Hi all, I just picked myself up a Mediatrix FXO SIP gateway to play around with and hook into Asterisk but have no documentation. Are there default passwords or IP's that I need to know if I do a factory reset? Or better still, would anyone have a User Manual they could send my way? Any help would be appreciated. TIA. Jamie

Hi, I am trying to test a Mediatrix 1104 FXS SIP gateway with Asterisk, but I have some problems. When registering the Mediatrix gw doesnt respond to Asterisk's 'proxy authrisation required' messages as if it didnt understand them. Strnage thing, when I have type=friend, asterisk says that the Mediatrix is unauthorised - get fast busy in handset. When I put type=peer in sip.conf, I