similar to: Call files timeout on Flash command

Problem: Flash on X100P does not flash. Phone line has Call Transfer. With this line plugged into a regular phone, it can receive a phone call. Then, depress the hook momentarily, release. Dialtone is now available. Dial a different number. Call is answered. Hook Flash again, now in a three way call. Hang up. The other two parties are still in communication. Now, plug same line into the X100P.

I've tried to transfer a call using the Flash command, but with my configuration it doesn't work. I have a traditional PBX connected with a zap channel to Asterisk that acts like an IVR: TELCO line --> traditional PBX (FXS) --> (FXO) Asterisk >From the TELCO line I can make a call to the traditional PBX and reach Asterisk, the IVR system on Asterisk answers the call and I can

Greetings. I am attempting to configure a system based on Asterisk 1.2.3 to be used as a backup should our aging voice mail/auto attendant system fail, which seems increasingly likely given its advanced years. The first part of this task is getting the auto attendant feature to work correctly, which I would have figured to be relatively easy. I have successfully built a menu structure, but cannot

Hi, everybody: As part of a paging macro I'm using SendDTMF to send digits to the called party. The section looks like this: exten => s,1,Wait(0.5) exten => s,n,SendDTMF(9531290) exten => s,n,Wait(1.0) exten => s,n,Set(MACRO_RESULT=CONTINUE) To test I direct the call to a live extension just to hear what's happening -- what actually happens is that only the 9 is sent, and

I have been trying to figure a way to SendDTMF into a MeetMe room using the Manager API. I can't redirect everyone into another context and then bring them back because that would mess up my logic. I am trying to use local channels and the originate Action to accomplish this. Exten: 3441115 Priority: 1 ActionID: actid-00000001 Context: senddtmftones Action: Originate Channel:

I've got a piece of CPE equipment that has an FXS port that I have tied to an FXO port on a TDM400 clone card. Normally, if I go off-hook with a standard telephone connected to it, I get a dialtone. If I dial a digit, and send a hookflash, the device will provide a dialtone back for the next available channel on the device. I'm trying to recreate this same behavior with Asterisk,

I have loaded festival-1.4.3 patched with the 1.4.3.diff file. Festival source is in /usr/src/festival dir. When I try to use it I get this from asterisk: -- Executing Answer("SIP/chad-57a4", "") in new stack -- Executing Festival("SIP/chad-57a4", ""I am talking"") in new stack == Parsing '/etc/asterisk/festival.conf': Found

Hi all, I'm unable to put app_festival to work. I successfully patched, installed and tested festival (interactive logon and telnet to server port) which seems to work without problems. But when I test it in asterisk I got the following trace in console: -- Executing Answer("SIP/bsenicar-850b", "") in new stack -- Executing

Interestingly enough I had this same problem today.... 1. I created the directory and permissions for the directory " /var/lib/asterisk/festivalcache/ " (per the comment in the festival.conf file) 2. I had to comment out some things in the festival.conf file: the "host" line, the "port" line, and the "festivalcommand" line. I have also noticed the

I just wanted to try out Festival, but I can't get it patched. I'm thinking that there is something missing from the steps listed at http://www.marko.net/asterisk/archives/0209/0389.html. >>tar xvzf festival-1.4.2-release.tar.gz >>patch -p0 </usr/src/asterisk-ng/festival-1.4.2-diff >> (or wherever the patch is located) When I run the patch command, I get the

Asterisk v1.0 is running on RH 9. I installed festival RPM (festival-1.4.2-16.i386.rpm) and edited the festival.scm file to add: (define (tts_textasterisk string mode) "(tts_textasterisk STRING MODE) Apply tts to STRING. This function is specifically designed for use in server mode so a single function call may synthesize the string. This function name may be added to the server safe

Hello, I have Asterisk running on a RH9 box; Everything seems to be working as it should, except for Festival. Every time that Festival is called from Asterisk, Asterisk silently shuts down. Festival doesn't give any error indication and Asterisk just plain dies without a peep. Festival was installed per the Wiki, using source and patched with festival-1.4.3-diff; it works fine at the

Hi I have installed Festival on the same box as asterisk and followed the instructions to integrate it with asterisk. Festival seems to work fine on its own performing text to speech from the command line or via a file. Asterisk answers the call but there is no speech. I can see no errors in the Festival log file The asterisk console shows --Executing Answer("SIP/81801-c091",

Hi, I?m trying to get app_festival to work. I got the source from the Debian woody package of festival-1.4.2 and applied the patch that came with * sources it applied fine; then I made the debian package and installed it. I have this on extensions.conf: exten => 6700,1,Festival(Hi there how are you doing ?) When I dial 6700 I hear nothing and then * hangups: -- Executing

Hello, I am having a Mac 10.6.4 (Snow Leopard). I have compiled and built Asterisk 1.6.2.9 and Festival 2.0.95:beta on my machine. Asterisk is working fine with SIP channels without Festival. I have written following context in extension.conf: [connect-to-me] exten => s,1,Answer Exten => s,n,SayDigits(?1?) exten => s,n,Festival(hello john) exten => s,n,Hangup I use call files to

I followed the directions I found in the list to a tee http://www.marko.net/asterisk/archives/0209/0389.html The server starts fine, but when I call the festival extension it gives me an OID error variable tts_textasterisk I have RH7.3 festival 1.4.2 speech_tools 1.2.2 patched it with the festival-1.4.2.diff located in the /usr/src/asterisk/ folder . When I patched it, the patch was looking

I cannot get Festival to work with asterisk. I have the following: exten => 555,1,Answer exten => 555,2,Festival(mary has a little lamb) exten => 555,3,Hangup I get the following from asterisk: "Festival returned ER" and the festival logs shows the following: client(1) Fri Jul 16 15:35:54 2004 : disconnected client(2) Fri Jul 16 15:40:26 2004 : accepted from localhost

I have an X100P connected to an extension of a Panasonic PBX. When a call from the PSTN comes in, it is routed directly to the extension where the x100p is . I want * to answer the call, play a message and then transfer the call to another extension via the Zap channel where the call was received (I need to flash the zap channel) . If this extension doesn't answer I want then to dial an IAX

This script was developed by Mark Johnson. All I did (Dean Collins) was type up the instructions and make it easy to understand. This Script will allow you to dial and extension number on your Asterisk@home V0.6 or later pabx and have it read you the weather for your city How it does this is; 1/ When you dial your extension it causes the weather.agi script to run 2/ This makes the program

Hey All, Thought I'd take a bash at trying to get Festival to work here on my lab system with the aim of using it to create our IVR menu prompts. I've spent most of the afternoon searching through the Wiki, the Festival website and Google and I've got a couple of questions. First one is that the 'Asterisk+festival+installation' page on the Wiki mentions the RedHat 9 RPMs