similar to: Playback over Console

I'm trying to setup a primitive announcement-paging system in my house using the line-out from my * box to a cheap amplifier that runs to speakers on our first and second floors from the basement. I have a extension that connects to Console, and console is set to auto-pickup. I'm using alsa drivers. This all works great, except for one thing. I want to play a tone over the console after

Hi, I have to do a comparison among three groups of genetic transcription levels. I have a situation like this: group 0: baseline group 1: first treatment group 2: second treatment In the first group, I have only 2 samples, in the second one 4 samples and in the last group I have 10 samples. I would check if the trnascription of a gene increases from the baseline situation to the fist treatment

Hello... I have a big problem with asterisk. Every time i make a call asterisk does not bridge the zap channels. The zap channel from which i'm calling remains in state:ring and applicaton:dial and the zap channel with the external line configured remains in state:dialling an Application:AppDial. Zap/20-1 agentie s 1 Dialing AppDial (Outgoing Line) 09399 (None) Zap/9-1 int_omg 09399 5 Ring

Hello all, I have a population of 112 servers that are experiencing different levels of packet loss. I don't want to poll all 112 of them (the analytical tools must be manually run on each individually) so it seems best to sample among them; then I plan on using R to run comparisons of the data pulled from each one. I'm not clear on the most sound way to go about this and I don't

Todd How do you have the context in the phones sip configs set? Bryant From: "Todd Reese" treese65 at gmail.com Hi all, I've been have problems with getting this system on line and would like to acquire some help with the extensions.conf. My current problem is that the phones won't dialout.on the VOIP lines listed as dialout1, dialout2, dialout3. This version of asterisk

Olly Betts writes: > On Thu, Jan 12, 2017 at 07:53:21PM +0100, Jean-Francois Dockes wrote: > > > Recoll also supports multi-word synonyms which could potentially > > generate PHRASE subqueries inside NEAR queries, but this > > understandably already did not work with 1.2, so the multi-word > > expansions are only used when proximity is not involved (by the way,

I see a lot of chatter in the archives about intercom and paging, but has anyone addressed zone paging? Each of the 50 telephones in a large clinic would be members of one or more paging zones. Someone could then page Dr. X in zone #1. Would this be possible with analog phones? SIP? Thanks, Mike

Olly Betts writes: > On Wed, Jan 04, 2017 at 07:29:58AM +0100, Jean-Francois Dockes wrote: > > Olly Betts writes: > > > The ticket has a patch which attempts to handle the OR case (which seems > > > to be the part you actually care about) but this suffers from issues with > > > object lifetimes which get a bit involved in the details. Since there >

Hi All, Running Samba on a Fedora 4 machine in a mixed home environment. Domain=[HOME-NETWORK] OS=[Unix] Server=[Samba 3.0.14a-2] Trying unsuccessfully to mount the dir that's on hdb1 on another Fedora 4 machine. Can mount any dir from hda just fine. Only problem is the one on hdb1. File permissions and everything else I can think of checking is identical. Just refuses to mount hdb1. Here

What headsets have people found work well with the Cisco 7940 and 7960 phones? To date, I have tried a couple of the headsets within the Plantronics H series (H41-N), and noticed that the volume of my speaking is lower over the headset than on the regular handset. I am currently looking for headsets that are known to work well. I do know that Cisco lists the H-91 and H-101 as certified to

Hello, I'm having the following problem when using a headset on XP connected to an on-board Realtek soundcard on an AsusTek M2N68-AM Plus motherboard: - Using any sound recorder (Windows', Audacity, XLite), the level is just too low when speaking at a conversational level, even with the microphone level pumped all the way up (line displayed totally flat in Recorder)

I have to design a dialplan for mulitple contexts (multiple companies) and I'm not sure how to go about it and I thought someone may offer help. Here is some background. There are three separate companies, let's say A, B and C. Each has their own context and each has their own set of numbers (these are just examples, not the actual config): [ContextA] exten =>

a customer of mine needs a UPS capable of supporting a small server in his office. Obviously, nut is a good thing for him for clean shutdown etc. especially with the crappy quality power in his office condo. I wanted to purchase an MGE UPS but it looks like they purchased APC and are now flogging that product line. Now, I've never been happy with APC. I have an APC 3000 (sans

Dear Samba-istas, Thanks for your work on a remarkable system. I'm having a problem dealing with a very simple system that I can't seem to figure out. I have a disk being shared from a Windows ME machine (I know, but I can't change that part) that I want to mount on various linux machines. I have a redhat 7.3 system that uses smbmount "Version 2.2.7-security-rollup-fix"

I have encountered the following build errors after applying xapian-qp-utf8-0.9.2.patch. There is no build error before the patch. - CentOS 4.2 64 bit version (RHEL 4.0.2 compatible) - AMD Opteron dual processor Can anybody tell me what I am missing? Thanks! Sungsoo Kim -------------------------------------------------- [root at saturn queryparser]# make make all-am make[1]: Entering

Hi, Please brace yourselves for some possibly stupid questions. Why are there only 2 codebooks for floors and many more for residue values? What makes the encoding of floor values fundamentally different from encoding residue values? I have a basic understanding of VQ, and looking at the floor decode function, it all makes sense 1) Read the codebook index from the stream 2) Do a

I have 3 sets of Cartesian data, one is 'original' data and the other 2 are "smoothed"data. The smoothed data is the result of applying a smoothing algorithm to the original.One set of smoothed data is the 'old' algorithm and the other set is the 'new' algorithm. Does R have the capability of telling me which data is "smoother"? Example data (subsets

OS: CentosOS 7 I have installed samba + openldap + smbldap-tools + pam by: yum --enablerepo=extras install -y epel-release yum install -y smbldap-tools yum install -y samba openldap openldap-clients openldap-servers migrationtools yum install -y nss-pam* I know that smbldap-tools is a dead project, but I'm interested in it and would like research on it. I create users and

Hi, in the code below, I am drawing 1000 samples from two beta distributions, each time using the same random number seed. Using set.seed(80) produces results I expect, in that the differences between the distributions are very small. Using set.seed(20) produces results I can't make sense of. Around half of the time, it behaves as with set.seed(80), but around half of the time, it behaves

I need to backup a set of machines that are very similar in nature. I had created an exclude list to backup everything except whats in my list. I then used the --exclude-from=myexcludefile so rsync would not copy unwanted files. eg: /tmp /var/tmp /var/lock .... long list of others /u1 I have 2 drives on each machine and up until now I have no need to be backing up the 2nd drive. Thats what the