similar to: Zaptel dacs / dacs

I have the following configuration: CLEC -> T-1 -> Asterisk -> Adtran Channel Bank -> (analog) -> Nortel Don't complain that it's ugly. I've already done plenty of that. The CLEC manages their Adtran remotely and needs to be able to continue to do so. I assume they use FDL to do the management. We are using the Zaptel DACS/DACSRBS to cross connect some of the

After speaking with several people, and even participating in a forum of several other people with echo issues, I thought I'd share what we've done (well actually what our chief R&D engineer, Brett Bourn has done...) First let me say that normal cheapy PC hardware couldn't be made to function with out echo. We tried on both the single port Digium T1 card and the 4 port Digium T1

Hi All I have problem with LIBMFCR2 for once Exchange I using Sangoma card, the firstly. my ssystem run successful with MFCR2, connected to E10 (Acatel Exchange), after that, i move connection connect to EWSD (Siemens), my system don't work. error protocol R2. my system: Asterisk CVS 1.1.X LibMFCR2 pre.005 and unicall-pre.005 this's my setting and my setting wanpipe1.conf

Em (20:59:21), Asterisk Users Mailing List - Non-Commercial Discussion escreveu: >On Tue, Jun 21, 2005 at 08:09:52PM -0300, Alessandro wrote: >> >> Does Somebody know why no load modules to FXS? I used zaptel-1.0.7 >> version. > >What color are the modules? >Post your /etc/zaptel.conf > >-- >Mike Mike, The color is green, red ans bluw. Link

zaptel compiles fine (make linux26) but when I modprobe ztdummy I get the follow error. [root@localhost zaptel]# modprobe ztdummy Notice: Configuration file is /etc/zaptel.conf line 0: Unable to open master device '/dev/zap/ctl' 1 error(s) detected FATAL: Error running install command for ztdummy System info: Linux localhost.localdomain 2.6.9-5.0.5.ELsmp #1 SMP Thu May 19 19:24:44

Hi all, Does somebody know why no load modules to FXS? I used zaptel-1.0.7 version driver. [root@server1 zaptel-1.0.7]# modprobe wctdm ZT_CHANCONFIG failed on channel 3: Invalid argument (22) Did you forget that FXS interfaces are configured with FXO signalling and that FXO interfaces use FXS signalling? /lib/modules/2.4.21-27.EL/misc/wcfxs.o: post-install wcfxs failed

Hi, all I have installed TDM400 with 1 FXS and 1 FXP ports. Now I am goig through documentation on how to configure it. It mentions 3 protocols: Loopstart, Groundstart and Koolstart. Which one do I use? Can someone send me sample zaptel.conf file for Australia? This will save me some time and will be used as a working example. Thanks, Rudolf

Hi Guys, is there a client which can be used on the SonyEricsson P800/P900...? IAX would be cool, but i take anything that can connect (via bluetooth) to an asterisk-server ;-). The phone is Symbian, and can also execute java-stuff... Greez Andreas _________________________________________________________________ Find your perfect match @ http://personals.xtramsn.co.nz with XtraMSN

Symptom: Phone after about 15mins will stop functioning Problem: DHCP lease renewed but default route dropped Fix: Assign a static ip and problem is resolved. Upgrade to new firmware once it is released It turn's out that these phones have a few issue in 1.0.3.81 firmware. The phone may stop transmitting packets if configured with DHCP, if DHCP is being provided by certain devices. Netopia

Hi, I know it's not really the place, but if anybody in the UK (or US) is interested, I'm clearing out lots of new Cisco stock... 7970G's (colour LCD), 7960G's, 7940G's, 7920G's (wireless IP phone), 7935's (conference phone) and 3550-24-PWR switches. I also have boxes of 7914's, the single-7914 foot stand and double-7914 foot stand (these are required to

Hi Has anyone opened up a grandstream phone or handytone ATA to find out what is inside? What is the CPU? How much RAM? Cheers Rob

Heya everybody. I have been peering into the code for zaptel for a while now, I am keenly interested in the dacs support, being able to apparently redirect certain spans to other spans. Not sure if this has to be on the same T1 interface or can be used between T1 interfaces on the same board or possible two different cards. Any information on the functionality of this would be greatly

hi all I spoke to this guy the other day, working with Cisco's VoIP system. He told me they were using a PRI/E1 to transport SMS, and could even do so from their phones. May this be possible with asterisk? I have an E100P in my primary asterisk server connected to a E1/PRI. roy

I have some strange question bout the asterisk (gpl license ...) but i'm not an experienced linux user ... What happens if for example a big company buys digium , do we have a garantuee that asterisk stays opensource ??? Kind regards Michael Devenijn -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/ms-tnef Size: 3208

The quick question: Do the digium drivers for the Digium Wildcard TE410P (4 port T1/E1/PRI 3.3v card) , the T100P (single port T1), and the TDM400P support hot plug PCI? I am also noting that while the TDM400P doesn't state the voltage requirements, it looks like a 5v card. I hope that I am wrong on this. What type of T1 channel bank would people recoment for ISDN (for video

Hi all, Information on this topic seems a little scarce, so I thought I'd try the list.... Apart from the the coolness factor can anyone explain to me in what situation one would use TDMoE rather than IAX for communication betwwen 2 Asterisk servers?

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, a bit of a newbie using Asterisk and trying to get some Sipura SPA-841 phones to talk to the Asterisk server. Not doing something right apparently.... If I turn on debug for the extension in the CLI (sip debug ip xxx.xxx.xxx.xxx) I see frequent 5 packet attempts by the server to contact the phone, but seems to always be failing. The status

When I was trying to run mutiple E1s over TDMoE, the zaptel would drivers complain about too little memory, whenever I added more than 31 channels. Requesting 62 channels in a dynamic span gave me ... span creation failed: Cannot allocate memory upon loading the zaptel drivers. How would you go about running, 8 or 16 say, E1s over TDMoE? Would you create multiple dynamic spans or just one large

I could swear that I remember seeing some announcement somewhere that Zaptel now supported drop-and-insert across spans on a TE410P, but now I can't find it. Am I imagining this? We just got our TE410 up and running, and if we could cross-connect digital channels with it, I think we'd buy another one for the remote end (instead of using the T100P we have). Searching Google ("zaptel

In reference to an old post from 2002: http://www.marko.net/asterisk/archives/0203/0103.html How does one go about doing this? Also, what is the present status of the OpenSS7 stack in Asterisk? What can it do now? And is there any possibility in the future of developing a DS3 card for it, if only for the purpose of mostly DACSing? Which is still a level of intelligent call control on the