similar to: asterisk: problems with connecting to a (german) sip provider

When attempting to call one of the example numbers, like 17474745000, I only get "488 Not Acceptable Here". It works fine when I configure the softphone (Xten X-Lite) to use sipphone's server directly. Am I missing something? Here's my relevant config sections: sip.conf: in [general]: register => 17472442457:mypassword@proxy01.sipphone.com [sipphone] type=friend

hi, let me explain in detail, what i have configured and what is happening now: 1st router w724v (Deutsche Telekom AG): - port forwarding, everything to destination port 51000-55999 to device with ip 192.168.2.50 (interface of 2nd router) 2nd router Bintec RS353j): - configured NAT, everything to port 51000-55999 to device 192.168.3.99 (same ports) other direction is totally open. I

Hi, have some problem with incoming calls from sipgate. This was working in 1.4 but in 1.6 I get a 401 Unauthorized :-(. Sipgate has mentioned that I have to change the type to friend, but it is already friend, so what's wrong? Kind regards, Michael Here is the sip.conf: [sipgate_out] type=friend nat=yes username=1234567 fromuser=1234567 fromdomain=sipgate.de secret=secret host=sipgate.de

Hi everybody, I have strange problem: I'm calling from inside (either X-Lite using SIP channel or a ISDN telephone using Zap Channel) using sipgate to a number in public network. When I'm hanging up before the other person picked up the phone, the line is not closed correctly. The phone keeps on ringing until timeout (of Sipgate I assume) and it even costs my money, if the other person

Hi all, I have a strange issue, with a some kind complicate architecture... A router of our internet provider is in front of another bintec rs353j router, at which my freepbx installation is located. However, NAT etc. seems to work fine. BUT: Something is not working...: When registering my sip-trunk towards my provider (3 different providers, all behave comparable), everything works at first.

Hello, a person trying to call me by my phone number is getting the error 488 Not acceptable here. I googled that error, seems like this error is normally caused by a failed codec negotation, though I have no clue how I could have read this out of the logs. Anyway, my setup is as follows: Asterisk 1.8.13.0 - NAT - Sipgate SIP Provider The user calling me is also using Sipgate and is calling my

ping times are fine as well: [root at freepbx asterisk]# ping sipgate.de PING sipgate.de (217.10.79.9) 56(84) bytes of data. 64 bytes from sipgate.de (217.10.79.9): icmp_seq=1 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=2 ttl=57 time=46.4 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=3 ttl=57 time=46.7 ms 64 bytes from sipgate.de (217.10.79.9): icmp_seq=4 ttl=57

Hi, I have researched more into the problem of my Asterisk set-up not answering calls. The following error was shown on the CLI, can anyone explain what the problem causing Asterisk to not answer the SIP calls be? Information: I have an Asterisk box on a home LAN, behind a D-Link router/firewall connected to a cable modem. The 82.x.x.x is the IP for my cable modem. 192.168.0.101 is my

How can I see which codec is in use during conversation. I can see (for example) which codecs are negotiated before SIP connection, but I don't know which is chosen: 12 headers, 12 lines Found RTP audio format 3 Found RTP audio format 97 Found RTP audio format 2 Found RTP audio format 101 Peer audio RTP is at port 217.10.79.30:15666 Found description format GSM Found description format iLBC

Could anyone outline a method for trouble-shooting these messages "SIP/2.0 482 Loop Detected" I'm seeing on a particular peer? There is no call going on when these pop up. Sip read: SIP/2.0 482 Loop Detected Via: SIP/2.0/UDP 207.149.XX.XX:5060;branch=z9hG4bK0a322471 From: "asterisk" <sip:asterisk@207.149.241.3>;tag=as395506d6 To:

Hi all, I have an issue with asterisk 13 and pjsip. I guess it is somehow Firewall related, but I'm unsure. A registration to Sipgate is established successfully: <Registration/ServerURI..............................> <Auth..........> <Status.......> ==========================================================================================

Checkout http://www.voip-info.org/wiki-Asterisk+variables I believe that should have the answer for you. furthermore assuming that your number is always going to be 12 digits. exten => _NXX.,1,SetVar(mynumber=${EXTEN:0:12}) - will give you your number. Hope this helps. Umar On Sun, 13 Mar 2005 09:25:11 +0100, Harald Milz <hm@seneca.muc.de> wrote: > Hi, > > this

Hello i am trying to setup sipgate gateway i can get incoming calls fine, but when i dial in and then try to dial out i get this in asterisk command line -- Called 01179248615 at sipgate [Sep 18 13:58:30] NOTICE[28232]: chan_sip.c:17885 handle_response_invite: Failed to authenticate on INVITE to '"01179553708" <sip:SIP-ID at sipgate.co.uk>;tag=as30eb9dd1' --

Hi there, I am trying desperatly to register my WiFi Phone UTStarcomm F1000 with my asterisk server. I already changed the name of the user to "anonymous" since it looks like the phone sends that name. The WiFi Phone's IP is 192.168.1.217, the asterisk server's IP is 192.168.1.200 What is it that I am missing? Any help very much appreciated!!! The error message I get is: Jan

Hi all. Just as a quote note, can I thank everyone on this list. I find my self finding pretty much every answer I am looking for on here. And a big thanks to all thoughs helping us out. Mass Respect :) Ok, I'm using a SIP provider (SipGate UK) to do my international dialing etc, working great from extension 8 on phones. However some more friends/contacts have started using SipGate also, and

Hi, I've set up an Asterisk as voip gatway: VOIP <-> Asterisk <-> hfc-s card <-> NTBA <-> Siemens Gigaset Dect ISDN pbx. Outgoing calls from dect handset to the world are working. Incoming calls don't even ring the handset. I'm using the dahdi driver with the zaphfc kernel module. The hfc-s card is in nt mode. The msn is set at the dect phone/base station

I'm trying to setup sipgate on 1.6.1. Following the instructions on the site: http://www.sipgate.com/faq/article/394/How_do_I_configure_Asterisk, I created [sipgate] in sip.conf and a [sipgate-in] in extensions.conf: [sipgate] type=friend secret= ;;SIP_PASSWORD insecure=port,invite defaultuser= ;; SIP-ID fromuser= ;;SIP-ID context=sipgate_in fromdomain=sipgate.com host=sipgate.com

I'm trying to connect a sip call from sipgate to Asterisk A to Asterisk B. Both are behind NAT, but port forwarded. I get the connection, but no voice - either in or out. I can call on SIP from A to B (and from B to A). Do it all the time. Asterisk A receives SIP calls from Junction and Teliax. CLI on A looks right: == Using SIP RTP TOS bits 184 == Using SIP RTP CoS mark 5 ==

Hello, I am getting lots of messages as the ones attached below. Is this a problem anybody can explain. (My internet connection is NOT slow or instable... thus I don't get it.) Maybe does this result from incorrect registration? Cheers, Arik ----- sip.conf ------ [general] qualify=no srvlookup=yes canreinvite=yes register => xxxxx:xxxx@sipgate.de/xxxx [sipgate] type=friend

Hi, I have a few accounts with sipgate.co.uk to get some different DiD numbers. However, when an incoming call comes in, it seems to pick the wrong peer from sip.conf which sends the call into the wrong context and it fails because there is no extension in that context to match the register. Using the config's below, if I dial the DiD on account 2222222, it works fine - picks peer 2222222