similar to: Registration of H323 Endpoints?

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

Hello everybody, my * box is connected to gnugk with H323 channel. If I call from an H323 EP to SIP EP (GS HandyTone or Xlite), when callee is picking up, audio start but noisy (scratch) , then became ok for callee (SIP EP) but still scratching on H323 EP. Now I stop/start asterisk, call from SIP to H323 EP and it's ok. And from now, it's also ok when H323 EP call SIP one's! No

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

hello i am using asterisk-oh323-0.7.1. i want to convert sip call to h323 (h323 sjphone or h323 proxy). what could be the best way for this. i am successfull in converting h323->sip by using asterisk as gateway. help required on sip->h323. kamran __________________________________ Celebrate Yahoo!'s 10th Birthday! Yahoo! Netrospective: 100 Moments of the Web

Hi there. I am trying to connect Asterisk to a local danish ip-telephony provider. But is having some difficulties. First I thougt they were related to the provider. But then i started debugging on the Asterisk (aix2 debug) When I make a call using AIX to the provider everything seems to work just fine: *CLI> -- Accepting AUTHENTICATED call from 192.168.1.150, requested format = 1024,

Hi all, I have the following setup: UAs ------------SER ------------------------ ASTERISK ---------------------GNUGK --------------- GWs SER is configured to route call requests from UAs to Asterisk. Asterisk is configured to receive the call on SIP channel and dial out to GNUGK over H323 channel. The problem I'm facing is that asterisk sends out the call request to GNUGK and times out

Hi, I get this error when trying to dial an outbound extension from a sip phone: -- snip -- -- Executing Dial("SIP/2003-02d1", "OH323/3215435249@h323gk|20") in new stack -- H.323 call to 3215435249@h323gk with codec ALAW -- Called 3215435249@h323gk 0:33.283 H225 Caller:8143908 PWLib Assertion fail: Null pointer reference, file

Hi to all, I've installed Asterisk 1.4.9 with h323, and gnugk as soft gatekeeper. I've tested h323 using ohphone and I can talk between them, then I've tested SIP with Twinkle softphones and function very well. Now I have to perform call from h323 to sip and viceversa. How can I do it ???? I receive h323 call from a Cisco Voice GW to my Asterisk and this call have to go to a SIP phone:

I receive the following error when I try to call another H323 extension from another H323 when going through *. NOTICE[27669]: File channel.c, Line 1325 (ast_set_read_format): Unable to find a path from 1 to 8 NOTICE[27669]: File channel.c, Line 1296 (ast_set_write_format): Unable to find a path from 8 to 1 WARNING[27669]: File chan_h323.c, Line 528 (oh323_write): Asked to transmit frame type 1,

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

Hello everybody, First time installer and I need the lists advice. My plan is to use asterisk PBX with some hardware to terminate my calls coming from several operational gnugk gatekeepers. Do have RH9 and downloaded the latest asterisk from CVS. Compiled according instructions and is running fine. Could hardly find any info on h323 implementation untill the REAME in the channels directory.

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

Hi, I'm using a Cisco 7960 with a SIP load, and a Cisco 2600 router with an FXO port. Asterisk talks to the router via h323 and opens a call and connects with no problem. At exactly 74 secs (timer on the phone) the call drops, and Asterisks displays this message: -- H323:29764 answered SIP/6000-9794 15:20.606 H225 Caller:80eea08 H225 Received connect PDU.

Hi All. I'm using RedHat 9 I configured the chan_h323 and asterisk from CVS. This is the scenario SJ_lab_phone(sip) ---------------> Asterisk -------------> H323 GK --------------> PSTN I have tried all codec's and always the same result, the called phone will ring without dropping for how ever I allow it to but as soon as it is answered it immediately gets disconnected.

Hi all, i want to use authentication in h323.conf. How can i use it ? In the h323.conf is writed : "If you wish to use Authentication you need to set the appropriate auth keyword above" Where and how i have to set this keyword ??? I've tried "auth=yes",but it does not work. Thanks for Help, Thomas.

Hi all, I am using chan_h323 from Asterisk CVS to interconnect with GNUGK v2.2.2. Then I made call from a H323 EP, thru GNUGK, to SIP EP on Asterisk. However, I only heard ringing when the call was answered on SIP side. Below is the debug from chan_h323. Any help is welcome. Thanks. *CLI> == New H.323 Connection created. -- Setting up Call -- Call token:

I need to pick all the Asterisk and Cisco People a little. My company has a Cisco Call Manager 3.3, configured via h323 gateways. I have remote users that I want to place a SIP Server on the external WAN and be able to connect their phones to the system and be able to get calls and call people in the office going through the Cisco Call Manager and the h323 router. My only problem is that Cisco

Hello everybody, I?ve been pulling my hair for a week now over a problem, and I really don?t know where to look anymore. Here?s my setup: There is an Innovaphone IP3000 VoIP gateway on the LAN (10.253.30.254). I can use it to send and receive calls from physical phones attached to it. I have setup Asterisk 1.0.3, with H323 and openH323, and on the same server I also setup GnuGK (10.253.30.1). I