similar to: SIP clients, H323 client as gateway?

Hi there. I am trying to connect Asterisk to a local danish ip-telephony provider. But is having some difficulties. First I thougt they were related to the provider. But then i started debugging on the Asterisk (aix2 debug) When I make a call using AIX to the provider everything seems to work just fine: *CLI> -- Accepting AUTHENTICATED call from 192.168.1.150, requested format = 1024,

Hi pros, Newbie to asterisk, need some help. My existing senerio is we have 6 analog quintums and 1 digital H323, and our gatekeeper is gnugk openh323 located in US. Our business is Call Center and our method of dial is using prefix and gateway IP provided my Carrier. I also brought two AudioCodes MP108 8 FXS gateways, as our gateway runs on h323 my friend suggested to go for Asterisk. If

Hi all, I'm using following software and equipment and I have very strange behavior: Asterisk CVS-NHEAD-05/30/05-16:42:41 H323 gatekeeper - GnuGK 2.2.2 IAX2 client - Firefly 1.9.8 build 3945 H323 client - SJPhone Build 1.50.271d H323 gateway - Welltech Wellgate 3504A When I dial from Firefly (IAX2) -> SJPhone (H323) everything works as expected. When I dial from SJPhone (H323) ->

Hi, I am familiar with asterisk, though never actually tinkered with one myself ... so i don't know the full extent of its capabilities. I am facing a request to bridge a sip network and an h323 network. I would like to operate the sip with ser as the proxy and some gatekeeper on the h323 side (not required though). Actually, i have a few more points that may make it simpler - i do not need

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

Hi there I am pretty close on giving up on Asterisk :-/ I am (still) trying to make a call from a H323 phone to an Asterisk provider using AIX. But H323 does not route the number to AIX. All it is transmitting is an "s". *CLI> -- Executing Dial("OH323/R27865", "IAX2/demo:demo@gw1.musimi.dk/s") in new stack -- Called demo:demo@gw1.musimi.dk/s Jul 2

Hello: I am testing Asterisk with oh323. My question is: can Asterisk route some calls thru a second h323 gateway (a h323 <-> PSTN gw)? - Asterisk ip: 192.168.1.10 - h323<->PSTN gw: 192.168.1.20 I've tried: exten => _9XXXXXXXX,1,Dial(OH323/192.1.1.20) or exten => _9XXXXXXXX,1,Dial(OH323/BYEXTENSION@192.1.1.20) but it does not work at all. If my h323 client

Rafael J. Risco G.V. wrote: > > On Sat, 11 Dec 2004 16:49:12 +0000, Corvin <corvin.dun@wp.pl> wrote: >> Dnia sobota, 11 grudnia 2004 15:32, Rodolfo Grave napisa?: >> > Hi. >> > >> > I need to set up H323 on an Asterisk box. I've succesfuly compiled the >> > asterisk oh323 (including of course all the dependencies: PWlib and >> >

Hey All, Our upstream provider requires the use of H323 and after several months (6!) of having problems with OH323 I've decided it might be worth biting the bullet and getting a cisco device that can gateway up to approximately 50 calls from SIP to H323. Would a 2500 or 2600 series do the job? Once we get to the point of 50 simultaneous calls hopefully we'll be able to get something

Hi, I'd like to organize my Asterisk to properly handle incoming SIP/IAX/H323 callerids so they can be called back if needed. I have three incoming contexts for sip, iax and h323 calls. To each incoming call I'd like to prepend certain number that will be catched with pattern matching on output calls. For instance for iax I have: [from-iax] exten => s,1,NoOp(IAX call from outside

Hi, I don't know quite how to ask this question, because my knowledge is so limited at this time. I have an h323 phone that I am trying to use to do VOIP to phones on the PSTN. I want to sign up for a service and not have it go out my POTS line. I do have a Quicknet Line jack in my RH 9 box and it is fully confiugred. I have downloaded the latest drive from openh323.org and installed it

Hi, I ve got a problem when I do this : usr/src/asterisk/channels/h323# make There are a lot of errors with ast_h323.cpp and .h. And at the end, I've got this: make ***[ast_h323.o] Error 1 In fact, I want a sample PRI/H323 gateway. Asterisk _______________ |___ ____|

Is there anyone who is currently using Asterisk as a production H323 gateway? And using which combination of asterisk and H323 (chan_h323, chan_oh323?) The main issue is interoperability with other H323 parties (Cisco AS53xx, Nextone, etc). Searching the mailing list it seems that both h323 and oh323 are not so stable, is it only an impression or using h323 is really not so advisable?

Hi, I'm using a Cisco 7960 with a SIP load, and a Cisco 2600 router with an FXO port. Asterisk talks to the router via h323 and opens a call and connects with no problem. At exactly 74 secs (timer on the phone) the call drops, and Asterisks displays this message: -- H323:29764 answered SIP/6000-9794 15:20.606 H225 Caller:80eea08 H225 Received connect PDU.

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833

Hi list, why I cannot hear voice when I call from a SIP telephone (Budgetone and others) to a H323 telephone (several models)? could anybody please give any idea to solve this issue? Please, let me know. Thanks in Advance. N.B. The configuration for "extensions.conf", "sip.conf" and "h323.conf" files are: ***************************************

Hi, is it possible to use Asteriks for translating SIP to H323 and vice versa? I am looking to implement the following Setup SIP UAC <-> SIP-Server <-> SIP/H323 Proxy <-> H323 Server <-> H323 UAC Basicly i want SIP fones to talk to H323 fones and and SIP Fones to access PSTN Gateway(s) in a H323 network. Anyone got something similiar running? Any ideas? best regards,

Hi to all, I've installed Asterisk 1.4.9 with h323, and gnugk as soft gatekeeper. I've tested h323 using ohphone and I can talk between them, then I've tested SIP with Twinkle softphones and function very well. Now I have to perform call from h323 to sip and viceversa. How can I do it ???? I receive h323 call from a Cisco Voice GW to my Asterisk and this call have to go to a SIP phone:

I need some help with getting the following to work SipPhone <------> Asterisk <------> H323 GK (quintum) And H323Phone <------> Asterisk <------> H323 GK (quintum) I have tried to run the Asterisk from the newest ports and could after some digging around in the configs register the SipPone to Asterisk and Asterisk to the H323 GK. But when I try to make a call from