similar to: connecting to Iconnect here using asterisk

Hi all I am trying to figuure out how to get iconnecthere incoming calls to work outbound works fine but incoming goes nowhere but to my iconnecthere vocemail if I do a sip show registry it shows up as regg'ed nnn=is my iconnect here number xxx is my secret Thank you Jeremy [general] qualify=no register=NNNNNNNNNNN:XXXX@iconnecthere/NNNNNNNNN context=default bind = 0.0.0.0 port=5060

Hello All, I have gone thru all the resources I could find on google on asterisk + iconnect and managed to get outgoing calls working. However, I cannot get incoming calls to work at all. With the sip debug on, I can see that something is happening everytime a call is received from iconnecthere, but I get an invalid tone on the caller side. The call never rings anywhere on the asterisk. Would

silly me, I thought the inbound would be the hard part. how little I knew... can someone please give me any insight into why outbound is not working, in fact why trying to enable outbound fouls up everything? I'm using asterisk, most recent from cvs, I'm behind a nat, and I'm trying to use iconnecthere.com for outbound and inbound. Inbound is working fine, no problems. But for

Hi guys i signed up to iconnect a few hours ago to try do some cool stuff. but im having a few problems. Im running asterisk and xp/xlite softphone.. both xp box and asterisk box are on public ips. The problem is that when i ring anyone in the world it'll ring they'll pickup and i can hear them 100% perfectly/clearly.. but they cant hear me.. occasionaly they can hear something like a

Hi, I was able to connect asterisk to iconnect's service. It took me almost two hours, but it's because I was having NAT trouble. I finally discovered that you can set the iconnect host to natrealy.deltathree.com to make it work. (for those of you who, like me, don't have the time to search the archive I'll provide a working sample in a minute) My problem was sound

This morning, I received a very strange error message on the Asterisk console. The error occurs when I try to access iconnect WARNING[196621]: File chan_sip.c, Line 386 (__sip_xmit): sip_xmit of 0x80d0854 (len 649) to 213.137.73.178 returned -1: Bad file descriptor I also get this error when I try to reload: WARNING[16384]: File chan_sip.c, Line 5355 (reload_config): Unable to get IP address for

Hi friends, I've noticed that first register message sent by * always get rejected by the destination sip server. Then * sends a second registration message ( with Autherization section, and that get accepted by the destination host). Why is this ? Isnt there a way to tell * to send with Autothorization message the first attempt ? Asterisk sends this first 9 headers, 0 lines 11 headers,

Hi folks, I want to fix hole in my asterisk set up. I use Vocal as my sip proxy and * for voice mail and the g/w to PSTN, Iconnect, fwd etc. So from Vocal I redirect sip requests which needs to go 'other' places. This senario works fine. Now the issue is someone else running a vocal or another SIP proxy can redirect his calls to my * as well. Those calls two will come through general

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

Hello all, I have a 7960 registered to asterisk. I am trying to use iconnect as my sip provider. When I send an invite to delta-three, I get the normal INVITE - 407 - INVITE exchange. The problem is, asterisk is sending the second invite using the 'dialed number' from the 7960 as the username, and not my 'username' configured in sip.conf. I believe that digest authentication

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

FYI: I'm getting a VERY strange set of responses from the deltathree/iconnect servers when I'm sending SIP calls to them. Looks like their load balancer has gone off the deep end. I won't include the extremely large debug here, but check out your current sessions with iconnect if you're having connection problems. Sometimes my calls will go through, but I'll get

I am seeing some very peculiar things in the routines that REGISTER my * server with several accounts. I saw this on my console: . . . NOTICE[5126]: File chan_sip.c, Line 1878 (sip_reg_timeout): Registration timed out, trying again NOTICE[5126]: File chan_sip.c, Line 1878 (sip_reg_timeout): Registration timed out, trying again NOTICE[5126]: File chan_sip.c, Line 1878 (sip_reg_timeout):

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

Hello, Recently I am seeing this message on my asterisk console received from Iconnect. Apr 30 11:37:21 NOTICE[1125329600]: chan_sip.c:5648 handle_request: Unknown SIP command 'NOTIFY' from '213.137.73.41' It is prety annoying as it appears once every four seconds. I've seen similar posts in the archives which points me to NAT keep alives being send by the remote end. I am

Just wondering whether we have a resolution to iconnect incoming problem, which started few days ago. Cheers SW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040808/ecc99c4a/attachment.htm

I am trying to get my connection to IConnecthere.com working. I didn't have a register command in sip.conf at first, so I believe that is why it was not working. However, I can't seem to get the register command correct, it just keeps timing out. Below is what I have: register=<username>:<password>@natrelay.deltathree.com I know that there is supposed to be