similar to: Blank faxes with RxFAX

Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the suggestions in those threads, but still have the same problem. I'm using the CVS Asterisk from July 11, 2005. Redhat FC2 SpanDSP 0.0.2pre18 Libtiff 3.5.7 Digium PCI card 1 FXO, 1FXS. I have a single POTS line coming, but I have 2 numbers and am using

Hello All, I am looking to get asterisk to receive faxes but I really don't know where to go from here, any help pointing me in the right direction would be great. What I would really like is for this second line to answer faxes, but if a user typing in an extension it goes to that extension but I need to get the fax working first. Error I get when I turn on Fax conf... pbx.c:1945

I have managed to get spandsp working, and if I dial a specific extension I can receive faxes. WhooHoo. However, I was wanting to use the "fax detect" option in order to allow individuals to receive faxes, but can't get that to work. Given the following extensions (mainly copied from examples on the wiki), why is the call simply passed onto the sip device rather than being

Hello, I'm trying to receive faxes with asterisk. My configuration is like this: PSTN fax -> ISDN -> Cisco router with VoIP module -> Asterisk When I try to send a fax from PSTN fax I got the standard fax signal, Asterisk starts rxfax application and then call ends and there is no tif anywhere. On the fax display there is still one message: Calling... Part of my extensions.conf:

Hi, I'm trying to setup a system where incoming faxes are received using SpanDSP and then send on to another (remote) fax machine. The SpanDSP part is working excellently, however I dont seem to be able to get the forwarding part to work. Heres what I put into my extensions.conf: exten => s,4,Answer() exten => s,5,Set(FAXFILE=/tmp/fax-${UNIQUEID}.tif) exten =>

How should be the macro rewritten? [macro-faxreceive] exten => s,1,Set(FAXFILE=/var/spool/asterisk-fax/${UNIQUEID}.tif) exten => s,2,DBGet(EMAILADDR=extensionemail/${MACRO_EXTEN}) exten => s,3,rxfax(${FAXFILE}) exten => s,103,Set(EMAILADDR=ronald@elmit.com) exten => s,104,Goto(3) ... [Jan 23 10:43:38] -- Executing Macro("Zap/3-1", "faxreceive") in new

Maybe I over-complicated my question with the mailfax part. If I leave the mailfax step out entirely, then there should be a .tif file, right? But there's not. No tif file gets created at all. Permissions on the fax folder are 777 at the moment. Thanks for the responses so far. /Rob -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have got my Asterisk server running with TDM400 card (2xFXO & 2xFXS). I originally had the system configured with a Panasonic fax machine on one of the extensions. Due to the high volume of fax spam, I figured it would be a much better idea to capture the faxes as TIF or PDF files to minimize wasted paper, etc. I have downloaded, compiled and installed spandsp and can see the rxfax

I'm trying to send a fax to my asterisk box, however shortly after connecting the fax machine reports a "communication error" and hangs up. Below is the error I get from RxFax: Fast carrier training failed Nothing is written to the file system as far as the tiff is concerned. Any ideas on how to fix this? Thanks ---- Sending Fax Machine: HP PSC 2000 Series 2210

is /usr/local/sbin/mailfax flagged to 755? ________________________________ Von: asterisk-users-bounces@lists.digium.com im Auftrag von Rob Danz Gesendet: Mi 13.07.2005 17:17 An: asterisk-users@lists.digium.com Betreff: [Asterisk-Users] SpanDSP rxfax, no tiff. Hello, Let me start by saying I have checked the wiki and the archives and did find some relative information. I tried the

I am attempting to get fax detection to work. I am using a NETjet-s card under ISDN4Linux. Asterisk does not seem to be detecting the fax tone. I have tried following as a test: [MainMenu] exten => s,1,Answer exten => s,2,DigitTimeout(3) exten => s,3,ResponseTimeout(5) exten => s,4,Background(Welcome) exten => s,5,Background(MainMenu) exten => fax,1,Dial(Zap/1,,d) [FaxTest]

I have asterisk 1.2.18 running on a new system we just installed. Although I've used AGIs many times in the past, I'm stumped on this one. It may just be a simple issue that I need another eyeset to look at. My AGI does the following: #!/usr/bin/perl #Load a few modules... use Asterisk::AGI; use DBI; $AGI = new Asterisk::AGI; #Grab input from Asterisk my %input =

Hello All, I am trying to set up faxing using Asterisk@home 0.6. I have followed the instructions to the best of my knowledge. When a fax comes in, the system seems to detect OK but does ot manage to make the fax to pdf to email leap. Here is what I saw in the CLI when I tested. Any help would be appreciated. Thanks! Wiley -- Starting simple switch on 'Zap/2-1' -- Executing

*@home has this for it's incoming fax macro --- start snip --- [ext-fax] exten => in_fax,1,GotoIf($[${FAX_RX} = system]?2:analog_fax,1) exten => in_fax,2,Macro(faxreceive) exten => in_fax,3,system(tiff2ps -2eaz -w 8.5 -h 11 ${FAXFILE} | ps2pdf ${FAXFILE}.pdf) exten => in_fax,4,system(mime-construct --to ${EMAILADDR} --subject "Fax from ${CALLERIDNUM}

Well, my faxes passes through asterisk successfully, however I still have some problems about fax reception by rxfax. The softfax answers, and negotiates transmission, however then as some stage of communiation something is wrong. But I have nothing more but this log: Jun 2 00:10:21 DEBUG[16900]: chan_zap.c:4242 zt_read: DTMF digit: * on Zap/10-1 Jun 2 00:10:22 DEBUG[16900]: chan_zap.c:4242

Hi, does anyone have any recommended (read tried and tested) way of making asterisk be able to handle incoming faxes. I've a PC running asterisk with a digium E1 card in and simply want to be able to route a call to some application which will take a fax call and save the fax as an image. I guess the bits I'm unsure of are how to terminate a fax call without a modem (if this is

Hello! I'm try to implement a fax service using spandsp (0.0.2-pre10) and NVFaxDetect (since I'm using a SIP channel). I receive the call from pstn on my SIP/PSTN gateway (welltech 3804). The fax is detected by NVFaxDetect and than a macro is started. The welltech use Alaw codec. The problem is the following: NOTICE[22270]: Dropping incompatible voice frame on

Hello all, Can this be done ? Would setting the variable FAXRESOLUTION to a appropriate value affect this change ? > http://www.asteriskguru.com/tutorials/rxfax.html Variables connected with the application LOCALSTATIONID - used by to application to identify itself to the remote end LOCALHEADERINFO - used to generate a header line on each page REMOTESTATIONID - set by the application, the

Hello, I'm trying to receive a fax to my inbound number from voipbuster. Asterisk receives the call and starts the rxfax application successful, but then nothing happens. The calling party is still hearing a ringing tone, or sometimes nothing. Voicecalls are working correct and without problems. For testing I've add a local number (300) to the dialplan. When I call this number

Hi, I have one Q: why doesn't work h-extension in macro? I want to setup fax macro, to send tif-file after fax channel hang-up, but h-extension doesn't work in macro, so I must put them to global context. But in this setup, exten => h,1,system(/var/lib/asterisk/bin/mailfax ${FAXFILE} ${EMAILADDR} "${CALLERIDNUM} ${CALLERIDNAME}") mailfax binary will be executed after any