Displaying 20 results from an estimated 200 matches similar to: "building asterisk"
2003 Jul 30
2
ADSI and SoftKeys
Has anyone solved the problem on the ADSI phones
that when you hit one of the soft keys, the Number Pad
stops working?
2004 Jul 29
2
Aastra 480e phone ADSI config
There isn't much documentation on adsi, but I called NETXUSA (the vendor
of my 480e) and they helped me along.
My experience:
1. I really had no experience with ADSI so I had (probably still have)
some misconceptions on how the configuration is loaded onto the phone.
2. I set the following in my /etc/asterisk/asterisk.adsi (most of this
is the stock asterisk.adsi script):
;
2004 Aug 04
4
Asterisk Integration
Can some one give me a tip on how do I integrate two asterisks
Thanks Felippe Kilian Martins NPD-UFSC
----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
2008 Aug 15
2
DID's needed for Reston Virginia - + hosted asterisk
I've just started consulting for a SME client based in Reston Virginia.
They don't know it yet but they are going to need a hosted asterisk
service and some DID's.
Email me if you are able to provide 10 DID's in Reston (must be able to
be ported away!!) and hosted Asterisk with end user configurable IVR
etc. Probably only 5-8 users at the moment BUT... they'll be
2010 May 13
18
Xen 4.0 Custom kernels
Hi there guys.
I''m using CentOS 5.4, I was able to compile my custom Dom0 kernel and boot
it, now I''ve got some doubts.
I''d like to compile a custom DomU image, the problem is that when I do, make
kernels KERNELS="linux-2.6-xen0 linux-2.6-xenU" it tries to download the
kernel
from the HG repository which seems to have old 2.6.18 kernels, I want to use
the GIT
2007 Nov 02
3
atmail & centos
hi friends,
i'm researching to see if i can run my own email server on centos. i'm
looking at qmail & centos, but the problem that i have is it doesn't have
the web interface that can similar with outlook. our users don't like
squirrelmail, or NOCC, or horde interfaces) however, i found
atmail.com and it seems to have what i'm looking for b/c it's kindda
2008 Feb 15
1
help on loop function
Dear lists,
Anysuggestion on how to write a loop function which has nx2 matrix as an input, where each of the row represents an interval. the function should return a mx2 matrix containing the no matched interval of x?? i've tried my own function but it's only applies for 2x2 matrix.
Here is my code:
overlap<-function(x,y){
m=length(x)
n=length(y)
for(i in 1:m){
2006 May 26
8
What is the different between Scaffold / Controller / Model
Hi everyone
I am learning RoR now and got a question.
What is the different between using ruby script/generate <Table>
Scaffold / Controller / Model?
Thank you
Victor
--
Posted via http://www.ruby-forum.com/.
2005 Nov 22
1
HTB classid problem
Hey, everyone, I am kindda newbie to this subject, so I just post my problem directly, please let me know if anything is wrong.
in my config file
when I use
tc class add dev eth1 parent 1:11 classid 1:11016 htb rate 512kbit burst 10k
everything works correctly
but...when classid goes larger than 1:19999, eg:
tc class add dev eth1 parent 1:21 classid 1:21006 htb rate
2006 Sep 19
5
VT 64bit kernel with >4Gb RAM
Hi there,
I have the lucky task to setup a Xen system.
my plateform is a dell 2950 with 16Gb of RAM.
I got as far as setting up debian sarge and xen following
http://www.debian-administration.org/articles/423
and overcoming some specific difficulties
(http://kmuto.jp/b.cgi/debian/d-i-2615.htm &
http://wiki.ncsa.uiuc.edu/wiki/Dell_PE1950_NIC_Firmware_Workaround)
But, my concern now, while
2013 Aug 16
0
RHEV hosts
Hi,
I have couple of RHEV hosts (ovpxen,RHV2, RHV10 etc) and i'm trying to connect from one of the client machine (C1). All the RHEV host have libvirt modified by vdsm. It looks like the below
## beginning of configuration section by vdsm-4.10.2
listen_addr="0.0.0.0"
unix_sock_group="kvm"
unix_sock_rw_perms="0770"
auth_unix_rw="sasl"
2005 Apr 05
4
ACL and delete files
Hi,
I have samba-3.0.13 on linux machine compiled with these parameters:
--prefix=/usr/local/samba-3.0.13
--enable-cups
--with-ldap
--with-ldapsam
--with-acl-support
--with-quotas
In smb.conf I defined share :
[POBOX]
comment = !
path = /data/disk1/pobox
guest ok = no
writable = yes
directory mask = 0777
force directory mode = 0000
directory security mask =
2008 Aug 16
0
Basic outbound calling issue : a lot closer
I get congestion (same error) with
exten => _NXXNXXXXXX,1,Dial(SIP/${EXTEN:1}@xxx.xxx.xxx,30,r)
not dialing 1
exten => _1NXXNXXXXXX,1,Dial(SIP/${EXTEN:1}@xxx.xxx.xxx,30,r)
dialing 1
exten => _91NXXNXXXXXX,1,Dial(SIP/${EXTEN:1}@xxx.xxx.xxx,30,r)
dialing 9
All the same
== Parsing '/etc/asterisk/sip_notify.conf': Found
-- Executing [9544790554 at To_Airspring:1]
2008 May 29
11
[Bug 16148] New: primary display is borked with RandR12 enabled
http://bugs.freedesktop.org/show_bug.cgi?id=16148
Summary: primary display is borked with RandR12 enabled
Product: xorg
Version: unspecified
Platform: Other
OS/Version: All
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
AssignedTo: nouveau at lists.freedesktop.org
2018 Dec 07
2
Matriz de Datos
Hola Comunidad,
Queria consultarles algo,
Tengo una data con la siguiente estructura
Descripcion Grupo Monto
a 1 1.826
a 2 3.497
a 1 4.749
b 1 3.999
b 1 1.638
b 3 4.445
c 2 4.935
c 1 2.299
c 3 1.111
Y quiero crear una matriz que a la fila tenga la descripcion y en la columna el
2004 Apr 03
0
Grandstream and codec G.711
Dunno why your phone isn't allowing you do negotiate
g711u but I can tell you how to upgrade the firmware. I
called them on Thursday for myself and they gave me the
following tftp server address for which to program my
phone.
4.3.153.50
Load this into your phone's tftp area and reboot it.
It'll go out to the net and check the firmware revision
and change it if required. I've done
2010 Aug 17
3
Total Harmonic Distortion THD
Hi
Has anybody done THD or THD-N measurements with the CELT Codec (bext would
be on various bit rates)
If someone could share results for Mono at 64kBit and Stereo at 128 and 196kBit it
would be great.
thank you very much
Jochen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.xiph.org/pipermail/opus/attachments/20100817/b1da17cc/attachment-0002.htm
2013 Apr 10
5
[Bug 9783] New: please don't use client-server model for local copies
https://bugzilla.samba.org/show_bug.cgi?id=9783
Summary: please don't use client-server model for local copies
Product: rsync
Version: 3.0.9
Platform: All
URL: http://lwn.net/Articles/400489/
OS/Version: Linux
Status: NEW
Severity: enhancement
Priority: P5
Component: core
2007 Sep 04
1
(fwd) Bug#440721: FTBFS on sparc while linking usr/klibc/libc.so
new klibc sparc build failure against gcc 4.2
----- Forwarded message from Kilian Krause <kilian at debian.org> -----
Subject: Bug#440721: FTBFS on sparc while linking usr/klibc/libc.so
From: Kilian Krause <kilian at debian.org>
To: Debian Bug Tracking System <submit at bugs.debian.org>
Date: Mon, 03 Sep 2007 23:35:23 +0200
Package: klibc
Version: 1.5.6-2
Severity: serious
2006 Jan 12
1
Problem with NLSYSTEMFIT()
Hello,
I want to solve a nonlinear 3SLS problem with "nlsystemfit()". The
equations
are of the form
y_it = f_i(x,t,theta)
The functions f_i(.) have to be formulated as R-functions. When invoking
"nlsystemfit()" I get the error
Error in deriv.formula(eqns[[i]], names(parmnames)) :
Function 'f1' is not in the derivatives table