similar to: Problems with Alcatel Speedtouch ST280

I installed the QuadBri card in my * server. I'm installing * on a RedHat 9 server I run the install.sh file. So far no problems. If I try to start /sbin/ztcfg -v -c /etc/zaptel.conf I will see the following error: Zaptel Configuration ====================== SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 2: CCS/ AMI Build-out: 399-533 feet (DSX-1) SPAN 3: CCS/ AMI Build-out:

hi there, I saw a page on voip-info about the thomson ST2030 phone. There is not so much info on there, that's why I would like to raise a question here. Has anyone got hands-on experience with this phone? (with or without extension module) I am interested if it can be used (as SIP phone) in a good way with asterisk. (also, do all the functions behave like they should; like Supervision

Dear all, Has someone implemented in R (or any other language) Knol DL, ten Berge JMF. Least-squares approximation of an improper correlation matrix by a proper one. Psychometrika, 1989, 54, 53-61. or any other similar algorithm? Best regards Jens Oehlschl?gel Background: I want to factanal() matrices of polychoric correlations which have negative eigenvalue. I coded Highham 2002

Dear List, I?m trying to figure out *memory page sharing***using HVM on Xen 4.0.1, but I?m not really able to find some useful information or sources about this issue. I just found two links porviding these sources: http://knol.google.com/k/learning-grant-tables http://blog.chinaunix.net/space.php?uid=20286427&do=blog&id=109114 Both are not working.. I think they are made for an older

I''ve been developing a series of custom assertions for testing my models and it looks like I can unify most some of the assertions if I can find a good way to determine the class under test at run-time. Now I refactor my test code rather vigorously so its not as simple as just stripping "Test" off the name of the test case class, but I have a few thoughts on a useful convention

When I get a SIP call, I get the following error: *CLI> NOTICE[1133718080]: File chan_sip.c, Line 1768 (process_sdp): Content is 'multipart/mixed;boundary="unique-boundary-1"', not 'application/sdp' WARNING[1225991360]: File pbx.c, Line 1154 (pbx_extension_helper): No application '' for extension (incoming, 5147771111, 1) == Spawn extension (incoming,

Hi Tinc group, I have recently got an adsl connection at home, which only provides a single static ip address. I want to set up a tinc vpn from home to my workplace. I am trying to decide what hardware I need to do the above. At the moment, I am aware that I could use an Alcatel Speedtouch USB modem directly connected to a Linux vpn box at my home. ( Wall socket---adsl cable---Speedtouch---usb

Hi all: I have problems to setup my zaptel E100P hardware. When I start * after receive the "Asterisk Ready" I see this: *CLI> Jun 22 20:37:55 NOTICE[1133718080]: chan_zap.c:4881 handle_init_event: Alarm cleared on channel 1 Jun 22 20:37:55 NOTICE[1133718080]: chan_zap.c:4881 handle_init_event: Alarm cleared on channel 2 Up to channel 31. anfter this: Jun 22 20:37:55

Our users are experiencing some unacceptable delay when trying to have a conversation. The delay is so noticeable that they keep stepping on each others words and resort to calling the customers via cell phone. Here is the setup SDSL Connection (PPPoA) Speedtouch 610 SDSL Modem 3Com 2224PWR Plus Switch (phones on separate VLAN) 8 Cisco 796 Phones All connecting to a remote Asterisk Server. We

Hi, I followed the how-to from http://www.alcatelunleashed.com/viewtopic.php?f=44&t=840 All works fine except for Asterisk->Alcatel calls. Actually, calls from Asterisk to analog extensions on the Alcatel work. However, calls from Aserisk to digital extensions on the Alcatel 4400 do NOT work. I get this error in the Asterisk log: -- Executing Dial("SIP/4053-0823dd48",

Hello, For a prospective customer, I need to evaluate the cost of an Alcatel OXE IP trunking licence price. The setup would be: PSTN -----<E1>---- Alcatel ----<SIP>----Asterisk ---------- SIP Phones At the moment, only a couple of simultaneous calls are needed between Alcatel PBX and Asterisk but later, this number will grow.

Hi guys, I need to interconnect an asterisk server (1.4.17) with an alcatel pbx, because i want that an asterisk extension can call an alcatel extension and viceversa. I need to do this throug a NT port (of the digium card) for technical reasons (linked with alcatel hardware). Card installation was fine, but i'm not sure of the configuration i choose. In /etc/misdn-init.conf i put my

Hello everybody I have an asterisk with an integration of alcatel pbx, by sip trunk, all calls are fine, but tha calls calls that originate from a analog line, the recipient is not listening, and that if they hear the call originates, the lines are E1 in alcatel pbx. When a asteris user call to analog line the call is ok. Everyone, has been that problem? I change asterisk version 1.4.21 to

Hi I just came accross this Newbridge Mainstreet 3624 but the Alctel site appears to have zip for reference/user manuals Anyone by chance have 1 of these or a url for the docs ? thx

Hello list. I'm going te explain my trouble. I have my asterisk with a TDM400P with 4 FXS channels. Two ports are connected to a Panasonic PBX (it's working fine), and others two ports are connected to an Alcatel 4200 PBX (but it doesn't anwer). I connected to a CO port (where i had a pstn line). When I call to the Alcatel PBX, the asterisk show me in it console that es ringing but

Hi there! I wan't to connect my * to an Alcatel 4400. Does anybody have some experiences with that? I have the problem that I can dial in to *, but not *->A4400 . :-( Thx Marc

Hello, I have the following problem with HFC card and Alcatel PBX 4400: - I want to connect Alcatel PBX and Asterisk with HFC card (zaphfc driver 1port S0/T0 interface card) - BRI line is configured at PBX to T0 trunk - In asterisk I have loaded zahfc driver in NT mode and also set in zapata.conf NT mode, point-to-multipoint. - I am using cross "isdn" cable to PBX -

Hi, Does anyone have any experience connecting asterisk to alcatel 4200 series pbx with bri cards? Does it should work with asterisk bri in NT mode, and alcatel bri with TE mode? Cheers, Igor Neves.

Greetings list, I've been asked by someone to help them set up a SIP link between an asterisk system and an Alcatel OmniPCX (v6 software). The asterisk bit's fine, but I know nothing about the Alcatel except that it does apparently allow the setup of SIP trunks. Does anyone have experience with the Alcatel unit? Any obvious pitfalls to watch out for? Any suggestions gratefully

Hi, I'm sorry if this is already asked somewhere on the list but I couldn't find it. We have an old PBX system controlled by our Telecom provider. There are analog phones but also digital alcatel phone's connected to it. These are not ip based but legacy digital phone's. Is there a way how we can connect them to our own Asterisk PBX? The old PBX is going to be removed, so it has