similar to: phone calls betweens phones behind the same nat

Hello, I would like to double check what Echo Cancellation my Digium Card uses. I thought I bought the little more expensive card that integrates EchoCancellation. How can I check? root at sn1:~# zaptel_hardware pci:0000:0b:08.0 wcte12xp+ d161:8000 Wildcard TE121 root at sn1:~# ztcfg -v Zaptel Version: SVN-branch-1.4-r4309 Echo Canceller: MG2 Is MG2 the correct one that I am supposed

Hi, I just got a Xorcom Astribank with 8 FXS but it does not work. So I tried resetting and loading the firmware. But loading just times out. /usr/share/zaptel/xpp_fxloader usb --------- FIRMWARE LOADING: (usb) [1 devices] 'xpp_fxloader'[11561]: USB Firmware /usr/share/zaptel/USB_FW.hex into /dev/bus/usb/002/003

Hi, I noticed that my hint priority stops working when I add to many extensions/channels. It looks like everything exceeding 80 characters is discarded. By stop working I mean the status is and stays "Unavailable". This works exten => *1,hint,SIP/loicvoip1_1&IAX2/loicvoip1_1&SIP/loicvoip1_1_a1 This does not work: exten =>

Hello, I recently got a problem I have never seen during my previous installations. I have a Xorcom device with 4 BRI and 8 FXS ports. I use ubuntu Linux and asterisk 1.4.22. Everything works fine but after some time zap channels disappear in asterisk. root at pbx1:~# cat /proc/zaptel/* Span 1: XBUS-00/XPD-00 "Xorcom XPD #00/00: BRI_TE" AMI/CCS NOTOPEN 1 XPP_BRI_TE/00/00/0 Clear

Hello, I am trying to update to dahdi 2.2.1. But somehow the xorcom (2BRI) device does not want to work. I pasted below the information I have. pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader reset pbx at loicvoip1:~# /usr/share/dahdi/xpp_fxloader usb 'xpp_fxloader'[4937]: --------- FIRMWARE LOADING: (usb) [1 devices] ..Got all 1 devices 'xpp_fxloader'[5003]: ---------

JFYI - I run (successfully) agx-addons with 1.4.22 and Etch. Make sure you have the right version of SpanDSP installed (as well as the tiff libraries). -->> -----Original Message----- -->> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Loic Didelot -->> Sent: 19 December 2008 20:33

Hi, I am trying to connect a doorbell to a Xorcom device. And the setup is quite simple. But when I push the doorbell all I see on the asterisk cli is: -- Starting simple switch on 'Zap/11-1' [Apr 2 13:00:40] DEBUG[8771]: chan_dahdi.c:6180 ss_thread: not enough digits (and no ambiguous match)... -- Hungup 'Zap/11-1' I defined the extension s,h,i,t,T etc... in my context. Any

Hello, I am having some troubles with Snom phones and maybe someone can help me. Let me say this: BLF and pickup works great with Polycomes and Grandstream etc... So I think my problem might not be Asterisk related but I am not 100% sure. The snom phones subscribe to my extensions (hint priority) as expected. The light blinks (ringing) or is turned on (in the call) as expected. My problem is to

Hello, I played with the externalIVR application. So far I am able to read digits and play sound files. But how can I leave the application and continue in the dialplan so that I can execute other actions like going to voicemail, or ringing users etc.... Best regards, Lo?c. -- Lo?c DIDELOT MIXvoip S.a. Tel: +352 20 3333 20 Fax: +352 20 3333 90 ldidelot at mixvoip.com http://www.mixvoip.com

Hello, I wanted to relaunch my problem with a quite precise and small question. Could the command "lsusb" affect interrupts when executing it regularly (cron) and if the zaptel pci card is sharing an interrupt with a usb bus? I have a Digium PRI card and a few Xorcom USB Devices. The Digium card seems to share the IRQ with some USB bus. cat /proc/interrupts CPU0 CPU1

Hello, I am testing the Openstage phones from Siemens but I can not find a solution on how to update the caller-id after a successful attended transfer. Of course, I mean an attended transfer by using the phones functionality, not something defined in asterisks features.conf. Any idea on how to achieve this, or any technical document from Siemens on on how this is support to work would help.

Hello, I have several customers describing something like annoying "silence suppression". So I did some tests and I can confirm. After disabling echo cancellation in zapata.conf the "silence suppression" effect is gone, but there is a little echo of course. I do not have this problem on other boxes where I am using oslec as an echo canceller. All my calls are SIP to ZAP (E1).

Hi, I've read README file in agx-ast-addons-1.4.17.5.tar.bz2 It says "Install libTiff >=3.8 and <4.0" Should you really use this agx-ast-addons to get app_rxfax and app-_txfax running with latest 1.4.22 ? If positive, should you take this libtiff warning into account ? If positive, where can you find such libtiff version as Debian repository (I didn't check alternate

Samba 4.0.4 installed, provisioned by classicupgrade, running on Debian Squeeze: -------------------------------------------------------------------------------- The issue is, that changes to the roaming profile is not transferred after log ins/outs between Win2K and XP machine. In example: I log into the W2k machine with my testuser and create a "testdir1" and "testdir2" on

I have been trying out several stun servers with Asterisk 1.6.0.9 and 1.6.1.0 and I keep getting the following message: [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]: chan_sip.c:2695 ast_sip_ouraddrfor: stun failed [May 26 12:26:35] WARNING[16174]:

Hi, I am looking for Chinese Japanese and Korean tokenizer that could can be use to tokenize terms for CJK languages. I am not very familiar with these languages however I think that these languages contains one or more words in one symbol which it make more difficult to tokenize into searchable terms. Lucene has CJK Tokenizer ... and I am looking around if there is some open source that we

Dear David, you asked this question a while ago on the R mailing list and got no answer. I have the same problem and was wondering if you had found a solution Cheers Loic Loic Thibaut, PhD candidate, ARC Centre of Excellence for Coral Reef Studies, School of Marine Biology, James Cook University, Townsville, Qld, 4811, Australia. Tel + 61 747 815 735, Fax: + 61 747 251 570, email:

I'm trying to use a Xorcom Astribank wth Ubuntu 8.04, but got no success. I can see the channel bank with lsusb, but when I tried to use zaptel_hardware, or when I try the /etc/init.d/script, they don't see my Channel Bank. I compiled the latest Zaptel 1.4.10, with Astribank's dependecies, fxload and libusb-dev. Anyone have a similiar experience ? Best Regards, -- Guilherme Loch G?es

Hello, I try to find informations concerning Mixmonitor command, but ... without success. MixMonitor command take at last parameter "command". This command can be a shell script. When record is over, and this command executed, asterisk wait for a return code or asterisk move to the next dialplan instruction ? This command is a background task or use ressources in asterisk ? For

Gidday everbody, We have just found an interesting issue regarding the sshd daemon on our SuSE system. For some reasons, the /usr/sbin/sshd process blocks SIGALRM as shown in the /proc/pid/status: $ cat /proc/`cat /var/run/sshd.init.pid`/status Name: sshd State: S (sleeping) SleepAVG: 0% [...] SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 0000000000002000 <-- SIGALRM is