similar to: (no subject)

Hi, I upgraded my local Asterisk (the last version was quite old), and since then, whenever anyone tries to call me via SIP/IAX thru my external Asterisk, they get "403 Forbidden" as soon as I pick up. I have no trouble picking up when someone calls via PSTN. Basically, my phone (Firefly softphone) will ring when they call, but will disconnect as soon as I pick up. It won't even

Hi My head hurts... Can anyone help out here, my remote IAX can see my local IAX and visa versa, conversation starts, I can dial my remote (POTS) landline number, remote end answers, trys to route to local iax2, I see it start the conversation here, the extension (SIP) rings once and then it dies... Both ends are defined with accept IPADDRESS to keep it in the family and simple.. Debug info

Hello, I have upgraded to 1.0.4 version of asterisk. After that asterisk crash every time On receiving an call from iax2 trunk to musiconhold application. SIP calls to MusicOnHold is however working. I already upgraded to 1.0.5, but the problem still Remainig. Any idea ? Iax2 : call proceding : Jan 25 17:29:40 DEBUG[9997]: pbx.c:1261 pbx_extension_helper: Launching 'WaitMusicOnHold'

Ok so it seg faults when I try to dial out through IAX(voiptalk.org), ofcourse it doesn't if I remove allow=speex :P ---- (gdb) run -c Starting program: /usr/sbin/asterisk -c [Thread debugging using libthread_db enabled] [New Thread 16384 (LWP 28283)] [New Thread 32769 (LWP 28285)] [New Thread 16386 (LWP 28286)] [Thread 16386 (LWP 28286) exited] [New Thread 32771 (LWP 28287)] Asterisk

Hi, i have a problem with iax2 and ringtone. Here is the call path pstn -> asterisk -> iax -> firefly or any iax phone. My problem is when i receive a call on my iax phone, the ring sound is very distort and bad. If i open my sip phone, and receive a call from my pstn, the ring is like dring dring, very normal. Otherwise, it is like a machine gun with iax Help would be really

Asterisk Project Security Advisory - ASA-2007-014 +------------------------------------------------------------------------+ | Product | Asterisk | |----------------------+-------------------------------------------------| | Summary | Stack buffer overflow in IAX2 channel driver |

Asterisk Project Security Advisory - ASA-2007-014 +------------------------------------------------------------------------+ | Product | Asterisk | |----------------------+-------------------------------------------------| | Summary | Stack buffer overflow in IAX2 channel driver |

anyone has idea what problem can be here, something with codec but i have today CVS version and grandstream phone with 1.5.0 firmware.I try to change codec in phone and also in asterisk-sip.conf but the same. What can be problem ? tnx, Tomaz *CLI> -- Executing Dial("SIP/102-767c", "CAPI/2:5") in new stack -- Called 2:5 -- CAPI[contr1/2003002]/0 is making

Hi, I was messing around with FireFly last night and got asterisk to crash hard. It looks like the bug is a division by zero in chan_iax2.c. I reproduced it and here are some infos I got from gdb: [Switching to Thread 245775 (LWP 23251)] 0x41154918 in calc_timestamp (p=0x816b710, ts=0, f=0x424eef24) at chan_iax2.c:2896 2896 int diff = ms % (f->samples / 8);

I've got IAX2 setup between two servers with this config: I have two servers on a switch: asteriskm is 192.168.0.160 and asterisk1 is 192.168.0.161 asteriskm has a Sangoma T1 card in it. I want to route calls from asteriskm to asterisk1 which will run an AGI IVR for the call. Config is below, but my problem is that 90-95% of the time when I start asterisk on the two servers I get the

Hi, i'd like to know more about this issue, i'm always getting this message while in call with anyone from sip to zap or zap to sip. ast_rtp_read: Unknown RTP codec 72 received here is my current setup: client side, x-lite, with the transmit silence to yes, using ulaw,alaw on asterisk server side: sip.conf contain allow=ulaw and allow=alaw dtmfmode=inband So i always get this anoying

I am using Asterisk CVS-HEAD-06/02/05-19:37:27. It seems that every call I made was duplicate. Jun 8 00:11:30 DEBUG[21733]: chan_h323.c:411 oh323_call: Placing outgoing call to 87874586, 101 -- Called 87874586 Jun 8 00:11:31 DEBUG[21733]: rtp.c:472 ast_rtp_read: RTP NAT: Using address 10.17.43.53:8000 Jun 8 00:11:32 DEBUG[21735]: chan_h323.c:1218 progress: Received ALERT/PROGRESS message

I'm running the latest version of cvs (not stable), I'm not sure what the other end is running and if this has been fixed or not yet, however I was playing round with onhold earlier, the call went to onhold, and came back from it, then 2 seconds later was hung up unexpectedly, below is what was on console... -- Started music on hold, class 'default', on

Hi Everyone, I've got a Cisco 3810 rig with 6 analog FXS ports, and ethernet. I'm wondering in anyone has got one of these suckers to work with asterisk in such a way that each FXS port has it's own extension. It speaks SIP, and I can send calls from asterisk out to it, but can't figure out how to get it to pass username & pw to asterisk when I try to configure it as a

Hello, I have an Asterisk box with a TE410P connected to a PRI line and agents with X-Lite installed on the same LAN as the Asterisk server. Sometimes, when I make outbound calls it hangs up as soon as other party tries to picks up the call. Does someone ever experienced this situation? On X-Lite, only G711-ulaw is enabled and here is what i put in sip.conf: [4001] type=friend username=4001

On Wed, Mar 25, 2015 at 7:35 AM, Salaheddine Elharit <salah.elharit200 at gmail.com> wrote: > hello list, > > i have asterisk 11.15.0 and i have some trunks sip from my provider > > we have some ip phone astra 6731i > > each Ip-phone is configured with trunk and we call > > no ihave configured another trunk from the same provider in my asterisk > > i can call

hello list, i have asterisk 11.15.0 and i have some trunks sip from my provider we have some ip phone astra 6731i each Ip-phone is configured with trunk and we call no ihave configured another trunk from the same provider in my asterisk i can call all numbers just the numbers are configured in thses ip phones. but when i configured the same trunk in x-lite i can call theses ip-phones without

Dear All, I just setup the Asterisk with E100P which it's no problem in Dial In but I have problem when outdial. The connection method is like this : E1 PRI <-SIGNAL-1-> MaxLink (PBX) <-SIGNAL-2-> E100P <-> Asterisk <--> SIP \-----> Analog PHone Now when I tried to dial out by SIP X-Lite on Windows, it shows me Connect, Trying,

tnaks for your response but the number dialed exist and i can call this number when i configure the trunk directly in x-lite and i call call also this number from my cell phone . any help thanks and regards 2015-03-25 12:59 GMT+00:00 Matthew Jordan <mjordan at digium.com>: > On Wed, Mar 25, 2015 at 7:35 AM, Salaheddine Elharit > <salah.elharit200 at gmail.com> wrote: > >

I am making some assumptions, but assuming the 217.195.xx.xxx is your provider, you are getting this back from them: "Got SIP response 556 "No address found" back from 217.195.xx.xxx:5060" Are you sure that "0033149xxxxxx" is the format the provider is expecting? You might try enabling SIP debug on the 217.195.xx.xx IP and seeing what the INVITE looks like, but