similar to: SIP 404 error....

I'v a sip client and a sip trunk to FWD: [general] port=5060 context=default tos=reliability disallow=all allow=ulaw careinvite=no [freeworlddialup] context=default type=friend username=MYUSERNAME secret=MYPASSWORD host=fwd.pulver.com [igor] type=friend callerid="Me" host=dynamic dtmfmode=rfc2833 careinvite=no When i try to call a FWD number from SIP client i obtain a lot of

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

Hello, I'm trying to receive a fax to my inbound number from voipbuster. Asterisk receives the call and starts the rxfax application successful, but then nothing happens. The calling party is still hearing a ringing tone, or sometimes nothing. Voicecalls are working correct and without problems. For testing I've add a local number (300) to the dialplan. When I call this number

Hi Guys, I have Spikko setup as provider of DID and outbound routes and I can make calls out but no inbound calls via DID can be made. I did a sip debug which is reported below. I never receive the call though, I have a catch all in my inbound routes and it doesn't hit my context at all or not sip invite comes in: FreePBX: Trunk Name: *Spikko* Peer Detail *username=MyUsername*

Hi thanks to everybody who has been assisting me in solving the various problems I had to dial out from Asterisk to a PSTN number with SIP using Nikotel's VoIP service. I have drafted a mini-how-to which is available at http://www.akabeni.com/benjk/Using_Asterisk_with_Nikotel.pdf This is a first draft, I will amend this further, in particular the "verify and debug" section

Hello, I administer a small office. As is common, we have samba acting as Domain controller and I have a 'logon script' configured in smb.conf. The logon script does not do much: map the P: (public) and H: (home) drives, as well as setting the time. This is done through net commands, and is all very familiar to readers of this list. The new laptop arrived from Dell, and it's XP Home.

Hi Samba Bods, Sorry for re-posting this one but I got no response to my last post except for a level 10 logs request which I uploaded last week. I have been looking at numerous howtos and newsgroup postings and I cannot spot what the issue is. I am sure its a simple config issue, but I am lost .. I am using Samba 3.2.4 compiled from source on AIX 5.3 TL8 and using "security =

Greetings, I've set up the AMI and am able to authenticate, however I am unable to execute "Action: Status". I get a permission denied error: asterisk:/etc/asterisk# telnet localhost 5038 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Asterisk Call Manager/1.0 Action: Login Username: myusername Secret:

Hello R-helpers, I'm new to XML. I have been using an application for some time, but now I wish to automate my downloads with R. When I use the web interface of their XML application, I'm able to read the response in R with the XML package. My problem now is to send the requests directly from R. Here below are two XML request scripts that come from the applicaton help file. My

Hi All, I am using Samba 3.2.4 compiled from source on AIX 5.3 TL8 and using "security = SERVER" in the smb.conf works fine, however I am having some issues when using "security = ADS" .. I have followed numerous HOWTOs and newsgroup listings and seem to be going round in circles .. I think I can authenticate ok against the domain win2k3 server, but then Samba bombs out with

I've been running FreeRadius 2 on Centos 5.5 for a while now. So far so good. I'm now looking to make connecting to our WPA secured wireless easier. The RADIUS server is running in a VM and since the system is in use I have copied the original and used that copy to create a test environment. I have run through all system updates and have upgraded all relevant packages. The test system

Hello, I'm noticing strange behavior in one of our Asterisk nodes where the ACK is always sent to the proxy, but RR is not enabled for calls. The proxy drops the ACK. I'm using the AMI interface to originate a call: Action: login Username: myusername Secret: mypassword Events: on Action: Originate Channel: SIP/<SOMENUMBER>@proxy1 CallerID: <SOMENUMBER> Application: Playback

Hello everyone, I am a newbie to samba. I am trying to mount a Windows 2000 share directory on my linux box using smbmount. I am able to do so successfully. But I do see some errors pop up when I run the command. My mount seems to be stable and it is mounted as rw. # smbmount "//EngineerWKS85/My Drivers" /mnt/samba -o username=MyUsername,password=MyPassword,workgroup=MyWorkgroup

Dear all, First off, I am very new to asterisk so forgive me if any of my comments or questions seem trivial. Thanks to [this post](http://blog.polybeacon.com/2010/10/17/asterisk-1-8-and-google-voice/) and [this post](http://www.davidvossel.com/?p=28), I have GV set up on asterisk through jabber.conf and gtalk.conf. I can successfully dial out from asterisk. I'm trying to set up an

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

I am running Gentoo. I am trying to get my /etc/fstab to automatically mount a remote Samba share at boot time. I have the following in my /etc/fstab file: //192.168.0.2/share /mnt/share cifs auto,credentials=/home/user/.smbpasswd,uid=1000,umask=002,user 0 0 This works fine if I specify the username and password in the /etc/fstab file. However, if I try to use the credentials file

Im trying to send an email see the code below: Model: order_mailer.rb class OrderMailer < ActionMailer::Base def send_an_email() @recipients = "myadress@isp.co.uk" @from = "myaddress@isp.co.uk" @subject = "Ruby Test" @body = "The Body" end end View: send_an_email.rhtml <p>Email was sent!.</p> Controller: Admin.rb def

Hi, I have an application under development that I have been working on with a PC. I have just checked out the code on a Mac, and I cannot get my server to start. I am using Rails 2.0.2. Below is the error: wireless:events me$ ruby script/server => Booting Mongrel (use ''script/server webrick'' to force WEBrick) => Rails application starting on http://0.0.0.0:3000 =>

I am trying to use python 2.2 with the win32all extension under wine to access the ADSI components. I seem to be unable to bind properly to either the ldap or winnt name spaces Here is some an example from ldap Python 2.2 (#28, Dec 21 2001, 12:21:22) [MSC 32 bit (Intel)] on win32 Type "help", "copyright", "credits" or "license" for more information.

I have a multi-user Linux box in a mostly Windows NT/2000 shop. The office printer is available only via SMB (hosted by a Win2000 box) and access is restricted to valid users in the local NT domain. There is no "global" or "print" user/password. Everything mostly works. I have a 'DeviceURI smb://MYUSERNAME:MYPASSWORD@domain/printer' in /etc/cups/printers.conf. This