similar to: Changing IAX2 refresh times

Hi all, I spent most of the last weekend testing and trying to diagnose some mostly incoming call issues. I'll start with the easy one in the hopes it might have a positive impact on the others. First- I have an account with IAXTel. I can place calls to other IAXTel subscribers and also through IAXTel to landline toll free numbers and all works great. iax2 show registry shows I am

I created an account at IAXTEL.com to route 1-700-XXX-XXXX calls through. IAXTEL.com gave me a number (example) of 700-555-6226. I have made the following changes to my: /etc/asterisk/extensions.conf: [iaxtel700] exten => _81700XXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1}) exten => _81800NXXXXXX,1,Dial(IAX2/myusername:mypassword@iaxtel.com/${EXTEN:1})

G'day list, I am getting a lot[1] of traffic on my Internet link, ICMP messages from 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address belongs to iaxtel.org). I see from the wiki that IAXtel supports only IAX2 from December 2003. Fine, however it looks like my * still wants to try and register using IAX1, and I can't find how to turn this off. This situation is

Been meaning to ask this for some time... no big deal, but curious. I have a single register statement in my iax.conf for iaxtel like: [general] port=5036 register => npi:mypassword@iaxtel.com <snip> However, when I restart *, I see: Registered to '69.73.19.178', who sees us as 205.221.193.101:5036 Registered to '69.73.19.178', who sees us as 205.221.193.101:4569

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

[ Sorry, I incorrectly copied some Reference headers into this post and tacked it onto the wrong thread. -Steve ] So far, I have been able to receive incoming iaxtel calls via my assigned 1-700-xxx-xxxx number, but only when using md5 authentication in iax.conf: [iaxtel] type=user ; Incoming calls only context=incoming auth=md5 secret=<mysecret> ; Required for

I've asked this before but I don't recall seeing anyone respond. Maybe the answer is so simple that it should jump right out, but its not. I've got three iax connections defined, two working fine (including one to iaxtel), and one that is somewhat intermitant. If I do a cli 'iax show registry' and 'iax2 show registry' I see "both" iax and iax2

Hi All, Sorry if this has been covered in the past; I've tried searching the archives, but haven't had any luck finding a similar problem. Basically I have problems when using IAX2 (which I now understand is just IAX). I have three IAX connections setup - VoicePulse, IAXtel, and an Asterisk IAX<->PSTN termination provider here in Sydney (ATP) If I try to use the CVS STABLE version

I'm trying to make a call from an IAXPhone client - through the * PBX to an 888 number using the IAXTel link. I'm using the basic conf files for extensions and iax. I get successfully connected (at the "Attempting native bridge" line of the output) and am then able to talk both ways for 20 to 30 seconds and then the IAX phone appears off line. If I wait on the PSTN line for

We want to test capacity of our MeetMe room. The thing that is distinct about this is that the incoming line is being delivered IAX2 to our server across the net - so Telephone -> VoIP Gateway -> MeetMe. We want to test both the VoIP Gateway and the MeetMe room performance. You can reach our MeetMe room directly at 1-301-561-9229 If you want to test with us we're thinking maybe 9pm

I finally got around to signing up with Iaxtel and Free World Dialup... the price was right, as far as that goes! I've gotten and placed calls via FWD just fine. But I can't seem to get registered, or stay registered, with Iaxtel. My logs show the story; at startup I see: Jan 20 07:14:44 VERBOSE[14121]: -- Registered to '65.39.205.121', who sees us as ... yada yada... As

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I am trying to get Asterisks to connect to our StanaPhone so that I can use it to route my outgoing PSTN calls to. We have a free account and if I can get this working are willing to pay for an actual minutes with them. Here is what I have in my sip.conf: [stanaphone] type=friend secret=pAsSwOrD ; skewed for this message. username=3475341914 host=sip.stanaphone.com

Last week I was able to do some debugging of the problem I'm having with IAX2/GSM, residential-grade broadband, and VOIP. To summarize, I am having a great learning experience with * and Zap cards, SIP and IAX2. I hit a wall though, when I registered with iaxtel and tried doing VOIP. I spend the better part of a workday with the jitterbuffer and all sorts of settings and finally started to

Hi, I've been setting up * recently and slowly getting to grips with it, however I'm getting rather confused with all the different configs for IAX calls, FWD calls iaxtel etc etc. What I think I need it a basic understanding or even a comparison of these different voip systems (if thats what they are?) I'd like to be able to make calls to other voip users, both in the UK and abroad

I have, in iax.conf the register statement: register => username:password@iaxtel.com This causes registration attempts to iaxtel.com for both IAX and IAX2. Every once in a while there is a packet for port 4569 keeping the IAX2 registration alive. This is fine. But, I have a barrage of registration attempts to iaxtel on port 5036 for IAX. Every UDP packet is answered with an ICMP packet

Hi i was trying to call 17009978275 which is my Fwd line on my notebook from Asterisk and i keep getting this message on the console. -- Executing Dial("Zap/2-1", "IAX2/@iaxtel.com/17009978275@iaxtel") in new stack -- Called @iaxtel.com/17009978275@iaxtel WARNING[1150495040]: File chan_iax2.c, Line 4547 (socket_read): I don't know how to authenticate rob to

When I try to call iaxtel it goes to codec ADPCM even though I have define in iax.conf gsm Call accepted by 69.73.19.178 (format ADPCM) -- Format for call is ADPCM My settings: [general] port=4569 register => xxxx:xxxx@iaxtel.com bandwidth=high jitterbuffer=no tos=lowdelay [voipjet] type=peer host= xxx.xxx.xxx.xx secret= xxx auth=md5 notransfer=yes context=incoming disallow=all ;

I tried to connect my * to IAXtel, but i always get this errors. chan_iax2.c:5849 socket_read: Registration of 'mnetwork' rejected: Registration Refused On dial a iax number i get: chan_iax2.c:5526 socket_read: Call rejected by 69.73.19.178: No authority found chan_iax2.c:5528 socket_read: Immediately destroying 3, having received reject chan_iax2.c:2411 iax2_hangup: We're hanging

I didn't get any response at all to my last "request for status" on IAXTEL. So, when this happens, I attribute it to one of a number of things: 1. No-one knows. 2. No-one cares. 3. Everyone knows, but are too busy to reply. At any rate, my investigative side kicks in and I began searching thru the digest's I've gotten, looking for references to IAXTEL. Mostly it is