similar to: Voice Pulse

Greetings, I have been experimenting with Asterisk for a few weeks and finally decided to take the plunge and purchase a few DIDs for inbound calling. Our attempts at IAX/IAX2 connectivity with VoicePulse have been less than successful. We get "Registration Refused" errors from Asterisk whenever we launch the server. The front-line support folks at VoicePulse suggested that we are

I'm trying to use Jeremy's suggestion of dialling using just the peer name instead of user:pass@peer but I'm running into some really funky issues. It does the same thing with both VoicePulse and another * server I have. [voicepulse] type=peer host=gw5.voicepulse.com trunk=yes user=USERNAME pass=PASSWORD and in my dialplan: Dial(IAX2/voicepulse/${EXTEN:2}@VPWS,90,r) The log shows

hello, after playing with an asterisk configuration for voip for a few weeks i'm trying to get outbound dialing with voicepulse going - i've cut down the asterisk to a very minimal install (1 SIP client) to try to localize the problem. The SIP client works fine (SIP and * on the same NAT) and could access the demo from samples before i removed it, and can call itself - so i am

Dear Sirs, Anybody ever tried running SIP up against Voicepulse? On their http://connect.voicepulse.com they claim they support both SIP and IAX, but I can't seem to get SIP running. I have as mentioned before on this list - huge problems getting any timing devices running on some of my machines, so IAX is not really an option right now. If I try I get a "Service Unavailable"

I've been looking for a good iax or sip <==> ptsn provider. Someone with very low cost usa calling and can offer incoming ptsn connections in most markets. The only decent providers I could find were iconnecthere and nufone. Has anyone found someone that really stood out? Matt Hohman New Heights Church http://www.newheights.org 7913 NE 58th Ave. Vancouver, WA 98665 Office:

Hi All, I'm using DISA on my * server to avoid overseas toll charges when making calls to Western Europe from my cell phone. I have DISA working with a DID from a VoicePulse Connect account. The outgoing call to Europe is also made via Voicepulse Connect. I see that the IAX media path is bridging the inbound call to the outbound call so that the media stream entirely bypasses my server once

Hello All, I have a small * server in my home office with several IP phones. The system is not fully in service yet as I'm still hunting for a cost effective FXO adapter that I can rely upon for my two primary PSTNs. That said, I'd like to move it into service for another application...which brings up a question. I'd really like to stop making international calls from my cell phone

My goal is to have only 1 primary phone number that can seamlessly "pool" multiple VoicePulse accounts. Let's say I have 3 accounts with VoicePulse Connect 212-555-1000 (primary) 212-555-1001 212-555-1002 When I receive inbound calls on 212-555-1000, I want to "forward" or "roll over" the connection to 212-555-1001 and 212-555-1002 so that the 212-555-1000

I am trying to set up IAX with Voicepulse. When I turn on debugging I get the following message when I call my PSTN number: NOTICE[1142106560]: File chan_iax2.c, Line 4321 (socket_read): Rejected connect attempt from 66.234.228.132, request '3017275115@VPWS' does not exist Any help would be GREATLY appreciated. Thanks, Isaac isaacmcdonald@attbi.com

Hey guys, Cal someone help me. I'm register voiceplus DID i try to config fllow example but not work. When i test call to number and debug iax2 in my asterisk not found packet. My iax.conf -------- register => in-xxx:yyy@gw5.voicepulse.com [voicepulse] context = voicepulse-incoming secret=yyy auth=md5 type=friend host=gw5.voicepulse.com ------ extention.conf ---- [voicepulse-incoming]

In response to the postings by Andrew Kohlsmith and Ernest W. Lessenger: Andrew, I modified the exten line in extensions.conf as you suggested. Unfortunately, It still does not work... Ernest, I spent approx. 4 hours reading list archives (and anything else Google served up) on how to configure iax.conf and extensions.conf to work with Voicepulse. Then, I sent an email to voicepulse

How about it. Anyone use these guys? Their rates look ok. I'm looking for alternatives to VoicePulse Connect that provide DIDs in Houston TX. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist www.pixelpower.com Pixel Power Inc. mgraves@mstvp.com o713-861-4005 o800-905-6412 c713-201-1262

I can ping it just fine. I am on gw5.voicepulse.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040615/054c83f4/attachment.htm

--On Thursday, February 03, 2005 2:20 PM -0500 Andrew Thompson <asteriskuser@aktzero.com> wrote: > What you are seeing with these bargain providers is they have a clause in > their contract that says they own the number, not you. It is a lock, and > it ought to be illegal, but sadly, it's probably not. If you choose one > of these companies that doesn't allow you to

I am wondering if there is a way to create a SIP/IAX group of outgoing lines like Zap groups. I am currently using the following method, but would like to use features such as ?g2? that would list all the accounts for a SIP or IAX connection. exten => _1NXXNXXXXXX,1,Dial(SIP/account_name:Password@gw5.voicepulse.com/${EXTEN }) exten =>

Did anybody ever come across an affordable, residential cable/dsl router with support for QoS? The ones I've seen so far (Netgear, D-Link and W-Linx) do not seem to support it. I noticed that even email can damage a G.711 stream on an 128kbit uplink, leave alone file-sharing applications. I understand this is strictly related to *, but nevertheless of interest to many of us. Thilo

Is anybody else out there using VoicePulse Connect and having problems this morning? I just noticed that they have absolutely no contact information in their website.. just want to make sure I didn't break something in my asterisk configs. -fedl

Anyone have one of these yet? http://www.voxilla.com/shop/index.php?action=item&id=38 -Dan

Hello, I'm looking for US DID and US50/CA 800# Providers. I found voiceconduits.com 8 month ago, there interface looks good, but there are still not live, I believe they won't be any time soon. I found sixtel, but order take eternities, they probably won't get my orders right any soon. So i'm looking for a good provider for DIDs and 800# from the US and CA, who offer online

I have been picking at Asterisk for about a week, and I think I'm close. I was hoping for a little guidance to bring this on home. I want to be able to make outgoing calls from my SJPhone clients using my VoicePulse Connect account. I have the two requisite items from Voice Pulse, but I've had no luck successfully integrating the VoicePulse settings into iax.conf. My current config: