similar to: iconnect register problem

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Hi, I was able to connect asterisk to iconnect's service. It took me almost two hours, but it's because I was having NAT trouble. I finally discovered that you can set the iconnect host to natrealy.deltathree.com to make it work. (for those of you who, like me, don't have the time to search the archive I'll provide a working sample in a minute) My problem was sound

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

I'm a total newbie at this telephony stuff but I'm putting together a low cost PBX for my small company and wanted a check on the h/w I'm planning on ordering and my system configuration. Any input is appreciated. Take it offline and email me directly if appropriate (mstupak@comcast.net). Here's what I'm planning: === Parts List === 1 Digium Wildcard TDM400P w/

Hello All, I have gone thru all the resources I could find on google on asterisk + iconnect and managed to get outgoing calls working. However, I cannot get incoming calls to work at all. With the sip debug on, I can see that something is happening everytime a call is received from iconnecthere, but I get an invalid tone on the caller side. The call never rings anywhere on the asterisk. Would

Hello all, I have a 7960 registered to asterisk. I am trying to use iconnect as my sip provider. When I send an invite to delta-three, I get the normal INVITE - 407 - INVITE exchange. The problem is, asterisk is sending the second invite using the 'dialed number' from the 7960 as the username, and not my 'username' configured in sip.conf. I believe that digest authentication

Hi, I just got a SPA-2000 in and was finally able to complete my asterisk setup. I'm making my outgoing calls through iconnecthere from the asterisk server however I'm running into a problem when placing calls. I can connect fine but when the person (or answering machine) picks up I hear them talk for a about half a second then there is a half a second pause or muted period and then the

silly me, I thought the inbound would be the hard part. how little I knew... can someone please give me any insight into why outbound is not working, in fact why trying to enable outbound fouls up everything? I'm using asterisk, most recent from cvs, I'm behind a nat, and I'm trying to use iconnecthere.com for outbound and inbound. Inbound is working fine, no problems. But for

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

I can't talk through iConnectHere. The connection gets made but as soon as any sound is transmitted the call ends and the Asterisk console shows an "Unsupported Media" error as follow: Got SIP response 415 "Unsupported Media" back from 213.137.73.147 My only allowed codecs are alaw and ulaw. My sip.conf looks like: [iconnect] type=friend secret=xxxx username=yyyyyyy

I have an asterisk Redhat 9 box running 4 hardphone extensions. Inter-extension calls are crystal clear. However when I dial out through my iconnect account I get a lot of jitter. At first I thought it was my nat gateway but after I programmed on of the hardphones (budge tone 100) for direct dial to iconnect I have clear voice transmission. I have no way of explaining this. My asterisk sip.conf

Just wondering whether we have a resolution to iconnect incoming problem, which started few days ago. Cheers SW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040808/ecc99c4a/attachment.htm

Hi guys i signed up to iconnect a few hours ago to try do some cool stuff. but im having a few problems. Im running asterisk and xp/xlite softphone.. both xp box and asterisk box are on public ips. The problem is that when i ring anyone in the world it'll ring they'll pickup and i can hear them 100% perfectly/clearly.. but they cant hear me.. occasionaly they can hear something like a

I'm trying to get Asterisk to talk SIP to Vocal and so far have only managed to get it partially working. Calls in from Vocal are working fine but outbound calls aren't. In sip.conf I have: [ivv] secret=SECRET username=08452416761 host=sip.intervivo.net fromuser=08452416761 externip=mt104.dyndns.org nat=yes canreinvite=no reinvite=no notransfer=yes In extensions.conf I

FYI: I'm getting a VERY strange set of responses from the deltathree/iconnect servers when I'm sending SIP calls to them. Looks like their load balancer has gone off the deep end. I won't include the extremely large debug here, but check out your current sessions with iconnect if you're having connection problems. Sometimes my calls will go through, but I'll get

I've been to the WIKI and I've searched the archives. Is anyone on the list successfully using iconnecthere behind NAT? I was, for over a year, and then I changed my "plan" with them. Now all my calls get intercepted immediately, "We're sorry, but your account is temporarily unavailable." Incoming calls work just fine. I contacted their so-called

Hi All, I am using PWLIB-1.6.6-1 and Openh323 1.13.5-1 and running a RH7.3 machine and I am unable to compile asterisk due to these errors. say.c: In function `powiedz': say.c:1633: parse error before `int' say.c:1636: `i1000E6' undeclared (first use in this function) say.c:1636: (Each undeclared identifier is reported only once say.c:1636: for each function it appears in.)

I have recently set to * to play with and I'm getting the hang of it.. I've seen various posts about problems where the SIP clients are behind NAT but I anted to ask a slightly different question. At the current CVS can the * SIP client register with a SIP provider (such as ICH) when the * box itself is behind a NAT. I have an ICH account which I can configure fine on an ATA 186 using