similar to: Asterisk to IAXTel help

Hi all, I spent most of the last weekend testing and trying to diagnose some mostly incoming call issues. I'll start with the easy one in the hopes it might have a positive impact on the others. First- I have an account with IAXTel. I can place calls to other IAXTel subscribers and also through IAXTel to landline toll free numbers and all works great. iax2 show registry shows I am

I am trying to work out IAX <--> IAX communications with my * box. I have a registration with iaxtel and I thought I would start there for my learning. I am able to call the number for Digium's support line (700-428-6000), but the sound is horribly chopping. Some reading revealed the jitterbuffer settings, so I enabled them in iax.conf. I have the following now: ; Inter-Asterisk

Hi there, do I have a local problem, or is registration at IAXTEL impossible at the moment? "iax2 show registry" permanently shows a TIMEOUT for 69.73.19.178. Philipp

Hi all, I'm trying to get IAX2 trunking between two * boxes and am having extreme difficulty :) What happens is when the sending * server (the one initiating the call) receives the ACCEPT back from the receiving server it immediately replies with INVAL. I've checked the code and it seems to be not matching the accept packet with the relevant item in the iaxs array due to the following

I didn't get any response at all to my last "request for status" on IAXTEL. So, when this happens, I attribute it to one of a number of things: 1. No-one knows. 2. No-one cares. 3. Everyone knows, but are too busy to reply. At any rate, my investigative side kicks in and I began searching thru the digest's I've gotten, looking for references to IAXTEL. Mostly it is

Hi all, We keep getting these and all the calls between these two asterisk boxes get dropped. what is going on here, I have been trying to solve this problem on my own but maybe I don't have the trunk setup right. also I have posed the output of my full log of the machine with the zap interface, the other is using ztdummy. IAX.conf on machine 1: [general] port=5036 ;iaxcompat=yes

hi We take calls inbound via SIP from our Cisco PSTN gateways, and pass it to customers using IAX (they run their own asterisk servers). We've noticed that asterisk is transcoding the call into a different codec, if the customer prefers a codec different to that which our cisco gw prefers. As such, the quality of the call can degrade. We'd rather asterisk just passed through the RTP

All, I have spent the last couple of days looking through the mail archives and the documentation on the Wiki, but have not been able to find a solution to the problem. The version of code I am running is from CVS as of 6/30/04. What happens is that when I make an IAX call to another IAX client the caller receives a really bad echo. All of the documentation I found around using

Our * box is behind NAT with 4569 forwarded to it. I'm using stable 1-0 version. We're pure VoIP. Our SIP phones can use * to dial out, and can receive incoming calls, and conference in another SIP. However, if we try to conference 2 IAX connections together, we'll get one-way audio for one of the connected IAX devices. I found that this also happens if I use an IAXy to call out from *

I have experienced a * problem with all "forwarded" calls where the inbound caller cannot hear any audio for 2-4 seconds after the forwarded call is answered, causing the caller--who cannot hear anything--to think there is no connection and thus hangs up. If the caller waits a couple of seconds, audio is restored and everything is OK. The problem didn't seem to be there when I first

I need to debug a call quality issue with remote users on the other end of a satellite link. The symptoms are: we here on the Internet side can hear them just fine. On their end, things work sorta OK most times, but they often suffer from severe dropouts and digital warbling, both of which I attribute to them missing packets. Often times they can't make out a word we are saying while we can

All, I was a bit too focused on where I thought the problem was - turns out I wasn't crazy and the dialplan does work as expected. The problem was with dtmf detection - setting relaxdtmf=yes did the trick. Sorry for the premature post for help. Begin forwarded message: > From: Ben Witso <benw@bgwcomp.com> > Date: Mon Jun 21, 2004 7:28:42 PM US/Central > To: Asterisk-Users

All, I have an issue with IAX that I can't comprehend. Approximately every eight minutes my servers go unreachable. They stay unreachable for exactly 10ms. I have two servers running IAX and it happens on both servers simultaneously. I have searched the archives and see similar issues, but not the exact same one. I am on the current CVS stable version of *. Also, during IAX calls,

Hi All, I've a single 1.2.17 Asterisk system. Gradwell here in the UK is used for PSTN calls via IAX2. Our 'net link is a dedicated 2Mb fibre connection (of which we have ever used 50% max bandwidth). We've no E1/T1 links, everything is IP based. My boss complains that many of the calls he holds with others has a bad quality. He also says that its not just him. My iax.conf file

Hello all, What my app does is accepts a call in on a Dial-In Number (DID) via IAX, and then prompts the caller for the top secret password (123) and then authenticates the user and prompts them to dial in the number they'd like to call. Once they press pound after dialing in the number it will read it back to them, if they press pound it will attempt to connect via the second IAX provider,

Hi! I just wondered if anyone would mine posting their successful jitter buffer settings here for me if they get a moment ?? I've spent a few hours trying to set the jitter buffer up reasonably logically and can definitely tell it makes a difference and can introduce latency and echo if setup incorrectly but I can't see a good post anywhere describing properly what the three settings

I finally got around to signing up with Iaxtel and Free World Dialup... the price was right, as far as that goes! I've gotten and placed calls via FWD just fine. But I can't seem to get registered, or stay registered, with Iaxtel. My logs show the story; at startup I see: Jan 20 07:14:44 VERBOSE[14121]: -- Registered to '65.39.205.121', who sees us as ... yada yada... As

I've been having 'gappy' audio problems with nufone for about a week now but I think I've nailed it down. Setup: office* - iax2 - colo* - iax2 - nufone office* and colo* are identical physical hardware (Xeon 2.8, dual ethernet, solely used for Asterisk) -- they are joined together through their second ethernet ports over a dedicated 2meg SDSL link. One hop between office* and

Hi all I've been trying to make * work with IAXtel to no avail, all seems ok in the config but am not getting anywhere This is what I'm getting from console (user/pass/dest # changed for obvious reasons): DEBUG[1133735216]: File chan_sip.c, Line 3841 (check_user): Setting NAT on RTP to 0 DEBUG[1133735216]: File chan_sip.c, Line 4891 (handle_request): Check for res for phone1

G'day list, I am getting a lot[1] of traffic on my Internet link, ICMP messages from 69.73.19.178 telling me UDP port 5036 is unreachable (this IP address belongs to iaxtel.org). I see from the wiki that IAXtel supports only IAX2 from December 2003. Fine, however it looks like my * still wants to try and register using IAX1, and I can't find how to turn this off. This situation is