similar to: snom 200 phones.

I just got 2 IpDialog phones for use with my Asterisk system. I have been able to get the phones to just dial local extensions but it is not able to register with my system correctly. I would like to know if someone has set these phones up before and how they did it! Is there any examples for use with Asterisk? They seem simple enough to config with there web interface. Thanks

Ok here is another problem I have run into. I have a Sipura 2000 and I have been able to configure line 1 with only one small problem. But I can't get the line 2 working with asterisk. Here are samples of my sip.conf and extensions.conf. If I disable line 1 I can then get line 2 working. Is there a sample configuration for the Sipura to get both ports working with Asterisk. Sip.conf

I would like to know if anyone has come up with a script for 911 dialing rules that put correct information on our locations. We have our office in 3 different building one being our production & shipping dock. It is almost 2 blocks away. We are connected with Ethernet Wireless between the buildings and have Sip phones setup in the other 2 locations. All the phones are working just fine.

I am new to this forum. As well as a new user of Asterisk. My vendor installed the system and we are still trying to get all the bugs out of it! I have a few questions about configuration and a program to view who is on what extensions. I am looking for a program that will work on my Receptionist work station. She is running Windows 2000 pro. We have not plans on upgrading to XP pro so

I have a question on SIP devices that are setup and working but you change the login name and contents to them why does asterisk need to be shut down and restarted for them to work? I have reloaded extensions and done a reload command. But the updated sip phones do not work until I shut down and restart asterisk. Is there any other way to update them without restarting the system? Since the

I am trying to get a building that has 3 company's on one asterisk server. I need to make the IVR via DID take them to there right menu. So far I have everything working except when they goto via standard_marco to an extension and are sent to voicemail they are dropped off in the first menu and not the one they came from. In other word sent to another company's menu. If it happens to be

I have a problem in that when you use IAX2 for trunking and have 2 nics one is used to connect directly to 2nd Asterisk server how do we get the outside Nic card to take IAX connections? Is there any way to get this working via two paths? There is only one bindipaddr=10.1.1.1 for internal trunk but outside address section? -----------------------------------------------------------------

I have 2 Snom 200 and would like to get them to work properly with Asterisk. With the Firmware 2.02t I am able to use the phone. But only one line configured. With there newer firmware 2.03o it will not allow me to make calls. But I can get calls on the unit. Again the 2nd line is not able to be registered. Is this an issue with Asterisk or Snom? I could use some example configuration

Hello I am still having problems with IAXTELL and FWD configuration. I get the following when I dial 17009965342 which is set as an example to dial to FWD people. 1+700+99+ 5 digit number. I have placed XXXXX where my passwords are. CLI> Executing Dial("Zap/14-1", "IAX/abatista:xxxxxx@iaxtel.com/917009965342@iaxtel") in new stack -- Calling using options

I have a Cisco 7960 & IpDialogs that I am not able to use the transfer button on it. What happens is that it puts the call on hold and then it gives you a dial tone. You can dial but it will not transfer the call. What we are trying to do is transfer to extension 700 for parking so another person can pick up the line. We can not use the # key to do this due to we have several IVR's

I feel this is in error some place. If I call a sip device that is not registered or not connected at the time. Asterisk will send that call to voicemail to busy not unavailable. Is there a way to correct this? Ariel Batista Kasi International - Computer Networking Ph: 305-574-6721 Fx: 305-574-0212 -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hello I get this warning all the time when I am using iax2 for inbound calls or outbound. Aug 24 13:48:41 WARNING[-1105474640]: chan_iax2.c:4873 socket_read: Error: Resource temporarily unavailable I get the calls and the sound is fine. But the screen on the cli is full of these warnings and Error: What can I do to fix this. I get it when using calls to iaxtel, FWD, VoicePulse, Nufone and

I have a problem which I need to resolve. We are trying to put an asterisk between a Mitel PBX and the world. We are adding Voip service via Asterisk. Here is are config files for the settings but our problem is the following. We are able to send calls to the Mitel pbx and it's the T1 connections is green saying it's ok. The support department from Mitel said that they use e&M and

I would like to prevent * from dialing 900 and 976 numbers. I setup the following settings in extensions.conf. But this does not seem to work! I don't know what I am doing wrong please help! exten => 1900XXXXXXX,1,Congestion exten => XXX976XXXX,1,Congestion exten => XXX976XXXX,1,Congestion exten => 1XXX976XXXX,1,Congestion exten => 91900XXXXXXX,1,Congestion exten =>

I am trying to get the following phones for testing. Is there a distributor in the US that is able to sell me these Sip phone and ATA adapters? I can not afford the Cisco phones there too hard to configure and too expensive! 1 - Sipura SPA-2000 2 - Grandstream Sip phone BT-102 1 - Grandstream HT-286 1 - Snom 105 Sip phone. I have called and emailed chagres but they have not reply. Nor

Try this one. Took me a while too. http://www.snom.com/download/share/snom200-2.05c-SIP.bin > -----Original Message----- > From: M3 Freak [mailto:m3freak@rogers.com] > Sent: Monday, May 17, 2004 11:42 AM > To: asterisk-users@lists.digium.com > Subject: [Asterisk-Users] Snom200 Firmware: I only see 2.04g > > Hello all, > > I've noticed several messages about the

Hi, I'm trying to set up my SNOM 200 with extensions, with different ringtones - but it doesn't seem to work. I've defined two extensions for it in Asterisk and in the SNOM 200 configuration. In the SNOM home>settings>SIP>Lines config page, I have set the ringer for the first extension to "ringer1", and "ringer6" for the second. In

I would like to use one of my Snom 200's 5 programmable keys to park calls. I am using image SIP 2.04g. I have tried a variety of combinations and have come to the conclusion that: 1) On the Key Mappings administration page, I must select the "Transfer" under the "Break Keys" option box to be able to successfully transfer calls using the "Transfer" button. 2)

I have a problem that sometimes lines will go into what I call never never land. The Asterisk system will put a line with <Zombi> on it when you type show channels it will make the analog phone line dead. And on the CLI it says: astsvr*CLI>Zap/1-2<ZOMBIE>(macro-twoline-exten,s,1)Up Dial Zap/1-2|20|r I have tried to release it with soft hangup Zap/1 & also soft hangup

Hi, I've looked through the archives and seen references to placing calls on hold on a snom 200 (any version of the firmware but we have the latest: 2.05e.) Basically, we can't place calls on hold on the snom 200! The manual talks about the Flash button (which is really the "R" button, as far as I can tell.) Pressing the R button will immediately disconnect the incoming call.