similar to: SuSE & Zaptel Compilation errors

Hi List, I am having some trouble with installing the latest version of ztdummy on a CentOS Kernel 2.6 system. I have installed a few Asterisk systems on Slackware Kernel 2.4.x without any issues, unfortunately there is no choice about this distro, or kernel as it has been preinstalled by someone else. And so I am in the dark with an unfamiliar distro and kernel. I am fairly sure the

Ok so I read the Linux 2.6 related README and finally compiled propperly, I thought but at the end I notice that lscpi does report the cards, but I cant modprobe wcfxo nor zaptel and I do have wcfxo.ko in the /lib/modules/2.6.8/extra/ directory, so what gives? This is a Debian Sarge, thanks! # # make clean starts here # make[1]: Entering directory `/usr/src/zaptel-1.4.0/menuselect' rm

i have error in install module of tor2. but it compile good. what happen ? ivr2:/usr/src/zaptel # make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f gendigits tones.h rm -f libtonezone* rm -f tor2ee rm -f core cc -I. -O4 -g -Wall -DBUILDING_TONEZONE -DSTANDALONE_ZAPATA -c -o

Group Following the information located on http://www.asterisk.org/index.php?menu=download I get the following error installing the zaptel Any help would be great!!! Thanks [root@VoIPGW zaptel]# make clean; make install rm -f torisatool makefw tor2fw.h rm -f zttool rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f zonedata.lo tonezone.lo libtonezone.so.1.0 *.lo rm -f *.ko *.mod.c .*o.cmd rm

/bin/sh: -c: line 0: syntax error near unexpected token `;' /bin/sh: -c: line 0: `if [ -n "" ]; then if [ -f ]; then mv -f .bak ; fi; cat .bak | grep -v "alias char-major-250" | grep -v "post-install torisa /sbin/ztcfg" | grep -v "post-install wcfxsusb /sbin/ztcfg" | grep -v "alias wctdm" | grep -v "post-install wctdm

Have anybody experience with the following error on a linux system. The system is for the rest running perfect without problems. The system was full installed with Suse 9.1 and updated. Following uname is my kernel 2.6.5-7.104-default Greatings Han Suse 9.1 professional AMD Atlhon XP 2200 Asus A7V600-X bios 1005 1Gb memory 400Mhz Geforce MX 4000 64MB 40 GB Harddisk

I am having a problem compiling zaptel on my Arch Linux (linux 2.6.10) system: CC [M] /home/sbn/src/zaptel-1.0.3/wcfxs.o /home/sbn/src/zaptel-1.0.3/wcfxs.c: In function `wcfxs_interrupt': /home/sbn/src/zaptel-1.0.3/wcfxs.c:473: sorry, unimplemented: inlining failed in call to 'wcfxs_proslic_check_hook': function body not available /home/sbn/src/zaptel-1.0.3/wcfxs.c:810: sorry,

I know that this subject has been treated in the past! As a matter of fact reading some old messages about compiling zaptel I made a couple of tests after the first compiling failure to understand why I can't compile on a specific machine, but I do not know how to handle the results. The machine has SUSE 9.3, and an updated kernel (2.6.11.4-21.7-default; as shown below). YAST (the graphical

I try to compile zaptel, without much success. I followed the guidelines in http://www.voip-info.org/wiki-Asterisk+Zaptel+Installation making dependencie results in: asterisk:/usr/src/linux # make dep *** Warning: make dep is unnecessary now. and make tells me make[1]: *** No rule to make target `modules'. Stop. asterisk:/usr/src/zaptel # make clean rm -f torisatool makefw tor2fw.h rm -f

I haven't seen anybody so far post a complex fix for the udev problems on FC3 with the latest kernel. On that note, I have a temporary fix to allow zaptel to load somewhat normally. I found that modifying the zaptel script to 1) load, unload, then load the driver modules and 2) insert a pause between modules seems to allow things to work. This assumes you have followed the instructions

Hi, I have the SuSe9.2 installed in a box with a QuadBri. I have followed all the instructions i have found and this is my best result... only one error compiling zaptel :( .. y have the kernel sources an already made the links to its drwxr-xr-x 8 root root 328 Jun 16 20:20 . drwxr-xr-x 12 root root 320 Jun 16 14:05 .. drwxr-xr-x 3 root root 136 Jun 16 20:17 asterisk drwxr-xr-x 22 root

Hello! I have problems compiling zaptel (tried 1.2.11, 1.2.10 and 1.4.0-beta2 -- all give the same error) with 2.6.19 kernel CC [M] /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.o In file included from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/xpd.h:26, from /home/roman/install/asterisk/zaptel-1.4.0-beta2/xpp/card_fxo.c:28:

Group Having trouble installing zaptel. Below is my server specs Intel Motherboard D101GGC TE405P CentOS-4.2-i386 Here is the output trying to do a 'make' =============================================== make clean rm -f torisatool makefw tor2fw.h radfw.h rm -f ztcfg torisatool makefw ztmonitor ztspeed zttool zttest fxotune rm -f *.o ztcfg tzdriver sethdlc sethdlc-new rm -f

Hi, I'm running SuSE 9.3 fully updated using YOU and I *have* re-booted the box (in a hope to sort out the uname -r issue mentioned below). I'm using the Asterisk Doc Proj vol 1 to guide me through the initial setup. I have no special HW and intend to use asterisk on an internal network just to get some experience. I have downloaded what I think I need and placed it in /usr/src (see

Chuck, Thank You I'm also going to try CentOS 3 The problem is I have SATA HDD and running in to trouble getting Linux installed. Will update after I test Ver 3 -----Original Message----- From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com] On Behalf Of Chuck Bunn Sent: Monday, March 13, 2006 12:45 PM To: Asterisk Users Mailing List -

Hi everyone, I've just compiled Asterisk from CVS in my FreeBSD-stable machine. It went fine. I did had to customised the Makefile though: ASTLIBDIR=$(INSTALL_PREFIX)/usr/local/lib/asterisk ASTVARLIBDIR=$(INSTALL_PREFIX)/var/lib/asterisk ASTETCDIR=$(INSTALL_PREFIX)/usr/local/etc/asterisk ASTSPOOLDIR=$(INSTALL_PREFIX)/var/spool/asterisk ASTLOGDIR=$(INSTALL_PREFIX)/var/log/asterisk

Hi! I currently have the X100P and TDM400P Asterisk cards. For obtaining Asterisk PBX: I have no direct connection to internet, so I use ftp and download the neweast packages: zaptel-0.7.0, libpri-0.4.0, asterisk-0.5.0. The environment I compiled the tool: PC (HP): Intel PIII 500 MHz OS: Red Hat Linux 8.0 (Upgrade from Red Hat Linux 7.1). When I compile the first package (zaptel-0.7.0), I

Minor fix. I'm using this in my RPM specfile. John --- ./zaptel-1.0-RC1/Makefile.bigu 2004-07-16 17:09:07.000000000 -0500 +++ ./zaptel-1.0-RC1/Makefile 2004-08-18 16:28:45.000000000 -0500 @@@ -316,10 +318,10 @@ elif [ -d $(INSTALL_PREFIX)/etc/init.d ]; then \ install -m 755 zaptel.init $(INSTALL_PREFIX)/etc/init.d/zaptel;\ \ fi - if [ !

I hope someone can offer me some help with this. Basically, the current CVS version of Zaptel will not compile under Fedora Core 4. I have closely followed the directions in http://www.voip-info.org/tiki-index.php?page=Asterisk+Fedora+Core+3 using the versions given in the FC4 distro with no luck. Here's the output when I run "make linux26". Any help would be great. TIA.

erro cocent:cc -shared -Wl,-soname,libtonezone.so.1 -lm -o libtonezone.so.1.0 zonedata.lo tonezone.lo /sbin/ldconfig -n . ln -sf libtonezone.so.1 libtonezone.so cc -o ztcfg ztcfg.o -lm -L. -ltonezone ./libtonezone.so: undefined reference to `cos' ./libtonezone.so: undefined reference to `sin' ./libtonezone.so: undefined reference to `pow' collect2: ld