similar to: Large Scale Deployments

Hi, I''m currently helping out with a large scale rails application deployment. The idea is to have an apache 2.2 with mod_proxy serving out to a farm of mongrels distributed on N number of servers. We''ll also have some Starfish nodes doing processor intensive tasks distributed on N number of servers as well. I was wondering if anyone had any experience of managing and

I'd like to float the idea of a VON panel discussion for large-scale open-source deployments, specifically using Asterisk as an application service and as a gateway service. In order to do that, I'd need to get a list of panelists together who might be interested in speaking. If you manage an installed base of >1000 users, and you're using Asterisk, I'd be interested in

Has anyone done any large scale intercom deployments with Asterisk? I've been asked about building a system to one-way page 500 phones simultaneously from a single server. My concerns are: - My limited math capabilities suggest 41 Mbps of RTP traffic, which seems like a lot, plus asterisk would be taking a single input stream and exploding it out to 500 endpoints. - There are 500

Hello - I'm looking for a cross-section of your experiences for large-scale voicemail system deployment using Asterisk, where "large scale" means 500 active users or more with PRI channel access. I have a situation that may call for an extremely large stand-alone voicemail installation, and I while I have faith that Asterisk can handle almost any load if correctly designed,

Hello , I learn handbook-draft.but I think I don't understand asterisk. where I can find some learning book about asterisk? thank u. B.R. John. -----????----- ???: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users-bounces@lists.digium.com]?? asterisk-users-request@lists.digium.com ????: 2004?12?24? 7:51 ???: asterisk-users@lists.digium.com ??: Asterisk-Users Digest, Vol 5,

AHA! # 1 is the case! Seems the user was fooling around with the phone after the firmware upgrade. Shame that that setting couldn't be locked out. Thanks to Mr Tahir and Mr Stredicke for their spot on responses. -----Original Message----- From: Usman Tahir [mailto:Usman.Tahir@snom.de] Sent: Friday, September 23, 2005 12:34 AM To: ColinA@landmarkmasterbuilder.com Cc:

I have had the opportunity to test many IP phones in the last 6 months and I thought you might enjoy a quick review of what I have found. Grandstream Budgtone 200 - Poor Quality for business use- Looks good, and the handset feels nice, buttons have a decent feel, but the disply is difficult to read when you are not directly over head of the phone, plus the sound quality of the handset, and

Dear Usman, I no longer work on UPS development. You should direct your question to the nut-upsdev mailing list (cc'd above). See also http://lists.alioth.debian.org/mailman/listinfo/nut-upsdev Best wishes, -- Peter Usman Abid wrote: > > hello sir i hope you will be fine i have read your article on > Belkin Universal UPS protocol description i want to communicate with > my UPS

While thinking about ZFS as the next generation filesystem without limits I am wondering if the real world is ready for this kind of incredible technology ... I''m actually speaking of hardware :) ZFS can handle a lot of devices. Once in the import bug (http://bugs.opensolaris.org/bugdatabase/view_bug.do?bug_id=6761786) is fixed it should be able to handle a lot of disks. I want to

I wanted to post this to everyone in case someone else ran into this problem! Firmware 6.5.1 (Current stable release) Asterisk 1.2.13 Call Completion: Off Peer to Perr call completion: On (canreinvite=no is set in sip.conf for each friend) Call join on Xfer (2 calls): Off Those settings seem to do the trick, I tested on Snom 320s with no errors at all, Im going to test on the 360s later today,

Hi, up until now I've always deployed VMs with their storage located directly on the host system but as the number of VMs grows and the hardware becomes more powerful and can handle more virtual machines I'm concerned about a failure of the host taking down too many VMs in one go. As a result I'm now looking at moving to an infrastructure that uses shared storage instead so I can

Hello - 1. Is there any way to directly export R plots to MIF format for import into FrameMaker? 2. If not, how hard would it be to add such a device driver? I don't see device driver docs in the R extensions docs. Are drivers contained in their own source files with simple interfaces to the data structures with plot data? 3. If that's difficult, what workarounds are

Hi Everyone, Im usman from Pakistan Im looking for remote systems administration related work full time or part time or per project basis. I have worked for more than 6 years in Internet services providers/ISPs as Sr. Systems Engineer, Systems Admin and Network Engineer. Im using Linux since Slackware 8 and Redhat 6.x, have worked in many Linux distributions Redhat, Fedora, Slackware,

>>>>> "Simon" == Simon Urbanek <simon.urbanek@math.uni-augsburg.de> >>>>> on Sun, 5 Dec 2004 19:39:07 -0500 writes: Simon> On Dec 4, 2004, at 9:50 PM, ap_llywelyn@mac.com Simon> wrote: >> Source code leading to crash: >> >> library(cluster) >> data(xclara) >>

Dear R-users, Can some one help me out. I tried installing some packages in R_2.5.1 but I get an error message as shown below. This is unusual since I have been installing and updatings packages in the same version of R. > chooseCRANmirror() > update.packages(ask='graphics') Error in .readRDS(pfile) : unknown input format or > utils:::menuInstallPkgs() Error in .readRDS(pfile) :

Hi, Snom phones firmware 5.0 is now out. Try it if you like: http://www.snom.com/wiki/index.php/Main_Page. Regards, --------------------------------------------------------------------- Usman Tahir snom technology AG www.snom.com --------------------------------------------------------------------- -------------- next part -------------- An HTML attachment was scrubbed... URL:

I would recommend that you look at the Pika Technologies Daytona MM board. It has onboard DSP and onboard analog bridging taking up much less horsepower. Please contact me off-list if you would like more information. Bill Hunt Stroudwater Contact Point 207 347 8080 x219 877 870 1234 Toll Free www.stroudwater.com "Realize the Value of Customer Contact!"TM This e-mail is intended

Hi, I have two 3 D arrays. Both are of this form array_1<- array[n,n,k] array_2<-array[m,m,k] Lets say n=83 and m=80 Since n>m. I would like to add rows and columns to array_2 to make them equal. I want to keep the size of the third dimension fixed i.e.. k. i.e. if (nrow(array_1)>nrow(array_2)) { array_2[m:n,m:n,]<- 10^6 } But this doesn't work. I tried abind and rbind but

Hello all, This is not a puppet proper issue of course.. but I was wondering if any of you could share some thoughts... When you deploy a system like Puppet at a large park of systems, you instantly increase the efficacy of mistakes and bugs in destroying the environment.... How do you deal with that? I would be interested in any experience or input, especially puppet proper best practices...

Dear R- Users, Please, what is wrong ? I am trying to run one sample Kolmogorov-Smirov test but I always get an error as shown below. > ks.test(A, "normal", 0,1) Error in get(x, envir, mode, inherits) : variable "normal" was not found > Thanks usman --------------------------------- Want to chat instantly with your online friends? Get the FREE Yahoo!Messenger