similar to: IVR with chan_h323 module

Hi there, Here at my company we are willing to use the asterisk IVR system. The problem we are having rigth now is that all our GWs use G729. I've read that in order to asterisk be able to make transcoding from the GSM audio files to G.729, it is necesary to purchase a license from digium. Is this correct? I've seen that licenses are purchased on a per-channel basis. Could

Hi there, I would like to communicate H323 IP phones with SIP phones. My H323 phones are registered to a gnugk GK, and the SIP phones are registered to a asterisk SIP proxy. I could not create a dialplan that works. Inside my extensions.conf file I created the following two entrances: exten => 4,1,Dial(SIP/4) exten => 5,1,Dial(SIP/5) This allows SIP phones call each other.

Hi there, I know this question is kind of stupid. But, I don't know anywhere else to ask. I've received some answers when I asked about the need of having a zaptel interface to make the meetme application work, that said that it was better to have a real hardware then the zaptelrtc software modules. So, my question is, would any of the following cards work with the meetme

Hi there, I am trying to register asterisk to a Lucent's MVAM GK. It is not registering to the GK with both h323 channels(chan_h323 and oh323). The problem is that if I set the GK(in asterisk) through the GK's IP, the GK answers with GCF without it's GK ID, and after that it does not answer to the RRQ, because the RRQ message has no GK ID. And when I set the GK through

Hello, Thank you for the job well-done. I installed the chan_h323 of the asterisk-1.2.7.1 and with lib pwlib-v1_10_0-src-tar.gz and openh323-v1_18_0-src-tar.gz and I used licensed g729 from digium. However, I am having a very funny behavour. 1. If I send a call on its ringing at the called side but the caller didn't get the ringing tone. 2. if the called picks up the phone, I am

I've got a random issue with a samba 3.0.10-1.4E.2 (from RHEL 4u2) installation. Basically everytime a pc boots up this happens: Dec 17 06:05:43 gws nmbd[15336]: [2005/12/17 06:05:43, 0] nmbd/nmbd_incomingdgrams.c:process_local_master_announce(311) Dec 17 06:05:43 gws nmbd[15336]: process_local_master_announce: Server foo at IP 192.168.0.133 is announcing itself as a local mas ter browser

Hi, all. Just wondering if anyone has tried using the Paperclip file upload plugin with Backgroundrb. My current implementation uses attachment_fu - I save the file initially to the file system without generating thumbs, then a bdrb process picks up that file, generates thumbs, and saves to S3. This works fine and dandy, the only hitch is I want to save image metadata in the same table

I have built Asterisk on SuSe Linux 7.3 on an Ultra 2 Sparc WorkStation. I am listing the modification I had to do for the benefit of anybody else who wants to use Asterisk This workstation is equipped with one 400 MHz RISC UltraSparc II CPU, 256 MB RAM, Two 9 GB 10,000 RPM UltraSCSI Disks. I have a gatekeeper running on this machine, I had to do the following modification to build * on Sparc:

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

#Mdarts is a matrix 2343x788 #frequencia is a vector 2343x1 # 9 in Mdarts[fri,frj] stands for my missing values which i want to replace by the value in the vector frequencia Mdarts<-t(matrix(scan("C:/GWS/CNB/dartg.txt"),ncol=nindT,nrow=nm, byrow=T)) frequencia <- matrix(scan("C:/GWS/CNB/freq.txt"),ncol=1) for (fri in 1:nindT){ for (frj in 1:nm){ Mdarts[fri,frj] <- if

>>Date: Mon, 18 May 1998 09:09:32 -0700 >>From: Jim <jimd@salinas.net> >>To: "'samba@samba.anu.edu.au'" <samba@samba.anu.edu.au> >>Subject: Win 98 >>Message-ID: <01BD823C.B0606D40.jimd@salinas.net> >>I am using samba-1.9.16p2-2 on Linux. Have used it for about 2 years with no problems. None. >>I have several Win95

Hello! Tried to compile, but : [CC] chan_h323.c -> chan_h323.o chan_h323.c: In function '__oh323_update_info': chan_h323.c:349: error: dereferencing pointer to incomplete type chan_h323.c:350: error: dereferencing pointer to incomplete type chan_h323.c: In function 'oh323_rtp_read': chan_h323.c:790: error: dereferencing pointer to incomplete type chan_h323.c:791: error:

* Proceedings by Springer and indexed by Scopus, etc. --------------------------------------------------------------------------------------------------------------------------- MICRADS?18 - The 2018 Multidisciplinary International Conference of Research Applied to Defense and Security Salinas, Ecuador, 18 - 20 April 2018

* Proceedings by Springer and indexed by Scopus, etc. --------------------------------------------------------------------------------------------------------------------------- MICRADS?18 - The 2018 Multidisciplinary International Conference of Research Applied to Defense and Security Salinas, Ecuador, 18 - 20 April 2018

* Proceedings by Springer and indexed by Scopus, etc. --------------------------------------------------------------------------------------------------------------------------- MICRADS?18 - The 2018 Multidisciplinary International Conference of Research Applied to Defense and Security Salinas, Ecuador, 18 - 20 April 2018

* Proceedings by Springer and indexed by Scopus, etc. --------------------------------------------------------------------------------------------------------------------------- MICRADS?18 - The 2018 Multidisciplinary International Conference of Research Applied to Defense and Security Salinas, Ecuador, 18 - 20 April 2018

Hello all, I got the following error compiling h323 support in the latest cvs. Below the error is a diff to the file that I got to make it work. I took an example out of sip as far as the syntax for ast_rtp_new. Not sure if it is correct or not, but it seems to work. Please correct me if I am wrong in the additional 2 arguements. Regards, Scott cc -g -pg -c -o chan_h323.o -march=i686

What happened to chan_h323.c in the asterisk cvs? I got ast_h323.cpp, ast_h323.h and chan_h323.h but no chan_h323.c. Hence chan_h323.so was not created so no h323 support in asterisk. Just wondering when to expect it again because I was stupid and didn't make a backup of the asterisk code before wiping the directory for a rebuild. -------------- next part -------------- An HTML attachment

Hello, I installed Asterisk from CVS on Redhat Linux 9 and working with chan_h323 module and g729/g723 free codecs too. My network connection diagram: ---------------------------------------------- X-lite/X-Pro-->Asterisk--chan_h323-->GnuGK--->AS5300-->PSTN boldsoft*CLI> show version Asterisk CVS-v1-0-03/24/06-15:27:08 built by root@boldsoft on a i686 running Linux I can make

Hi All, I am trying to build chan_h323 for use with asterisk 1.4.18 on Solaris 10. When I compile asterisk, the build fails at chan_h323 with: ---------------------------------------------------------------------- chan_h323.c: In function `reload_config': chan_h323.c:2863: error: `IPTOS_MINCOST' undeclared (first use in this function) chan_h323.c:2863: error: (Each undeclared