similar to: (no subject)

Hi people! i'm trying to work together the cdr with mysql. MySQL works on a windows machine, it seems ok but when i hangup with the sip phone, * write: Failed to insert into database. I have tryed to insert manually some values into the table and after i have seen that values in a php web page, and the sql server accept the incoming calls and display it properly. With MySQL Administrator i see

Hi All, I have some Asterisk 1.2 servers using the cdr_mysql addon (1.2.3) spitting cdr's over to a MySQL database on another server. All is working well except for a strange problem I ran into this morning. During some cdr database maintenance, the cdr table was locked for a few minutes, during this condition all the Asterisk servers stopped processing calls and reported this error: Jan 5

Hi list, I am using Asterisk1.6.2 form a long time and upgarding to Asterisk-1.8.23.1. I am using mysql backend for cdr. in asterisk-1.6.2 i have usegmtime=yes and it works as expected insert cdr date in GMT0. now i tested Asterisk-1.8.23.1 and asterisk-11.5 with same results no matter what i configure in cdr_mysql.conf "timezone=UTC usegmtime=yes" cdr always inserted in local time. I

I upgraded from RC2 last night, but have a major call quality issue. Heres our setup: 1 FXS and 1 FXO card. Incoming/Outgoing calls via IAX trunking from our provider. G729 running between us and the VoIP provider. Two handsets, one BudgetTone 102 and a Cisco 7940G running the 7.2 SIP firmware. Both these phones are using ULAW to the server, and we have plenty of G729 licenses on the server.

Hi there! I installed the BudgetTone (GrandStream) on my LAN without any problems. Then, I moved it to another location using a D-Link NAT. I opened 5060 (SIP) and 5000 to 5008 for RTP. I also fixed the IP address of the BudgetTone. When I receive a call on my Asterisk, it would ring my FXS as before. However, after I pick up, it hangs within a few seconds (Hungup Zap1-1 in the log). The

Sometimes I get the following error on the console: [May 31 11:14:01] ERROR[23502]: cdr_addon_mysql.c:230 mysql_log: mysql_cdr: Failed to insert into database: (1062) Duplicate entry '1180628004.3214' for key 1 -- Zap/38-1 answered UniCall/11-1 Why would the UNIQUEID be duplicated? Isn't is supposed to be UNIQUE? This worries me a bit because the customer is losing calls that

Hello, We have finally upgraded to Asterisk 1.4, however we've run into two issues that weren't occurring before the upgrade. Issue #1: We're an outgoing call center and need to record all calls. We use the uniqueid field in the CDR to match with the recording, which we labeled with {UNIQUEID} in MixMonitor. For some reason, the uniqueid is not correct in the CDR. Here is the

hi, can someone who has used Budgettone phones tell me how to do the following: an incoming call comes in and is answered by the receptionist. she need to put the call on hold, speak to whoever the call is for, and either (after that) pass on the call, otherwise speak again to whoever was on the call and hang up .. so far i've got as far as a blind transfer by pressing transfer button and

hi there .. I asked sometime ago regarding getting a Budgettone working with Asterisk over G729. My system is quite simple, Asterisk server with 1 G 729 license installed, and 10 Grandstream phones. Only one of them needs G729, because it's on a remote link via an ADSL bridge. The rest run happily on G711 on a local network. I added the lines disallow=all allow=g729 to the sip.conf entry

Just got my new Budgettone phone, and I've got a couple of issues. Most important, it doesn't seem to be querying for the time via NTP. I put a sniffer on the line, and once it boots up the only outbound traffic it generates is an attempt to contact a TFTP server, which is programmed in as 192.168.0.168. . . Must it first find a config file (it's asking for "cfg.txt")

--- "Chandra" <chandra@digital.com.np> wrote: >i have been using grandstream budgettone IP phones and they work fine >except that these phones times out after some hours.. i ahve seen that >the phones working ok are next day unregistered and sip show peers do >not show their IP and although these phones can make calls , they >cannot be called. They Sip show peers

Hi- I am attempting to setup my Budgettone phone for use with my * server and am having problems obtaining an IP address. I have checked the phones settings to make sure it has dhcp enabled and it is. The display says no IP. I bought the phone but do not have any documentation other than the Wiki, but I am still at a loss. What could be preventing the phone from picking up an IP address? Any

I have an asterisk installation at a client, it's quite simple. Basically it's an asterisk downloaded from CVS about a week ago, with 3 Zaptel FXO cards (the digium ones) and 10 Grandstream Budgettone SIP phones ... Every now and then, especially when a call is ringing and not picked up immediately, Asterisk quits with a segmentation fault error. IT seems quite inexplicable, my dialplan

Like most others on this list I also have some really annoying echo whenever a call goes out to the PSTN from a SIP phone... SNOM/Budgettone -> Asterisk -> X100P -> PSTN I have tried every echo canceler in the makefile and turned on and off aggressive suppressor etc. etc. etc. tried 32,16,128, and 256 bridgetaps and I can get it reduced to only a few seconds on the intro of the call and

hi .. i've just converted myself back to a newbie by trying to experiment with some new stuff .. I have connected two grandstream Budgettone 100 phones to my asterisk, and trying to experiment with them .. I am trying to get into the asterisk sample basically .. when I dial 1000 asterisk receives the call, but I do not hear any sound on the phone. Dialling from phone to phone direct (via

I was wondering if is there any way of plotting line segments on a plot. Actually I need a graph that shows the advantage of using a different method for estimate the parameter of my databse, so I've plotted the N estimatives for M areas in my database and then I've plotted the new estimation (N' estimatives) and I need a line to link those paired points (N'(1)-N(1),

as i''m finding it difficult to override the form Ui elements using activescaffold -= i''m looking for a help to build a drop down list in UI (values pulled from databse through SQL query) and so user can select these valus while submitting to database. pls provide any example strictly using activescaffold plugin. thanks selvan-kalaiselvan

Hi, I have used the Budgetone 102's extensively on Asterisk and found then quite reliable as long as you update the firmware. The GXP2000 is quite a mess at the moment as the current firmware does not support 3 quarters of the advertised functions and codec support is extremely limited. I have tested the unreleased latest firmware update for the GXP2000 and it's an incredible difference

I have a question about Samba's interaction with the PDC and SAM database on the windows domain. There are some in my company who say that Samba must read and write to the SAM databse in order to authenticate a user. This, according to them, poses a security risk in that a UNIX user could obtain tools to gain access to the SAM, retrieve all passwords and potentially corrupt the database. My

lol just posted this yesterday, it's for any ODBC DSN so Access or SQL or an Excel spreadsheet, as long as it's set as a DSN. This will work with outgoing Caller ID as well, it's just how you set it up in your dialplan. If you want I can email you the .agi since email will undoubtedly mangle the script. hth. HOWTO: A simple AGI application to modify incoming CallerID on the fly using