similar to: Line appearances

Hi - I'm wondering if any has experience with the Uniden UIP-200 phones. The product info says that the 8 led buttons at the top are all programmable. Can they be programmed as separate line appearances (ala Snom 200, Cisco 7960, Zultys Zip4x4, etc)? In other words - is the phone capable of multiple SIP registrations? Also, the post about these phones at voip-info.org mentions some

OK, here's a configuration challenge: I want to have certain line appearances able to be "interrupted" by various other line apperances elsewhere in the office. This is harder to describe than it is to demonstrate, so I'll do that: Let's assume I have Cisco 7960's on all desks. 1) Call comes from inbound line X destined on extension 1234 2) Phones A, B, C all

Anyone try the new Cisco firmware for the 79xx sip phones? In my test it seems to work fine for a little and than soon the phone looses its time. At first the status shows clear, and then it appears to get confused about the ntp time source and the time goes away on it. No features, just bug fixes. Perhaps I have something wrong with my ntp settings, but the other firmwares work just fine. --

I apologize for the double post. I am curious as to what the usefullness is of the multiple line appearance feature on Polycom phones. I setup our phones to register one line per extension but I hear the IP501's can do three line appearances. Why and how could this feature be applied? Thanks again all. Kenny ______________________________________________________ Click here to

Has anyone successfully implemented concurrent appearance of the same PBX extension on multiple SIP phones? When using Cisco 7960s under call manager, you can have several phones with the same line appearance, but the first user to seize a line makes it inaccessible to other phones. Under SIP operation it seems as though this is not possible, but we don't see group ringing definable for

I have a client with 20 GXP-2000s. Everything seems to be working fine. However, after a couple of weeks of use, the client is having a hard time adjusting to the new IP based phone systems and only misses one feature from their old Lucent system. That is, they had 8 analog lines before and all their old Lucent phones showed a button for each line. So, it was easy for anyone to say,

I am getting ready to install Asterisk and I was looking into the Polycom IP600 phones. I spoke with Polycom sales to verify the multiple line appearance and they said it would work. More specifically, if lines 1-3 all contain the same SIP registration info, the Polycom will only send out 1 SIP registration to the server and then handle the calls ringing on multiple lines. I was wondering if

Was in the process of upgrading a 7960 to SIP and in advertently applied a skinny image (P003G302.bin), now no matter what i put in OS79XX.TXT and OS7960.TXT it simply wont upgrade. The phone is pulling down OS79XX.TXT from my TFTP server but then goes on to repetedly ask for SEP<MACaddr>.cnf. Help!! -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, I have been using Cisco 7960's with Asterisk for years. I am trying get a 7961 working and have a problem. In my configuration, not all of my line appearances register to the same Asterisk SIP server. I have an Asterisk server at home and another at work. My Line 1 button registers to the home server and my Line 2 button registers to the work server. This has worked for years

Is there any way to play background music on a sip phone while the phone is not in use like many legacy pbx's offer? Could you take 7960 and use the 6th line in a similar fashion to the all setup maybe? Thoughts ideas? -- respectfully, Joseph - (606) 477-2355 x140 ------=============

I made a little php script that creates a 79xx config if you give it the mac address, ext, etc. Is this something that would be of interest to anyone? Likely it could be improved on. And there may be some variations that I have not thot of. -- respectfully, Joseph =============== ---------------------= ********** =

Greetings, I am trying to get either of the above features to work with *, but can't seem to get it quite right. If anyone has them working, I'd sure appreciate an extract from the relevant config files. Or, maybe I'm tilting at windmills, and * doesn't support them - in which case, the underlying business need is to provide the one incoming call on more than one

I am learning about SIP phones little by little. I've been working with * for about 2 weeks now with FXS and FXO ports and analog phones, but we want to evaluate the utility of going to SIP phones directly from here rather than investing in analog phones first. One of the questions I have is multiple line appearance on phones. Since the phone basically acts like a computer, there is no

Does anyone have Shared (bridged) Line Appearance working in Asterisk 1.4? Specifically with the Aastra 55i. Specifically, I am using the Aastra 55i with the expansion module. We want to see if other handsets are being used. (BLF) Getting BLF to work would be a great start. It sounds like setting up the hints properly will achieve this. right? Not totally sure how this should be configured.

*This message was transferred with a trial version of CommuniGate(tm) Pro* Will asterisk actually convert between two different codecs????? ie, a SIP endpoint running GSM and another running G.711? Wouldn't that add quite some latency? I was always under the impression Asterisk did not recompress and was smart enough to negotiate the right codec at each end and just pass through the RTP

Does anyone know if the 3rd patch listed on this bug fixes the seg fault problem related to voicemail? http://bugs.digium.com/view.php?id=4800 -- respectfully, Joseph --------------------

It just dawned on me as I was playing with the manager interface - it can't be very difficult at all to write an Win32 app that serves as a "lamp field". Between 'Newchannel', 'Newstate', and 'Hangup' events, all of the information is there. I've heard several requests for line appearances, but mgcp and sccp channels don't currently include support.

Hi All - I'm looking for a Wifi SIP phone that can do multiple line appearances. It seems the Spectralink Netlink e340 can do multiple lines, though I can't figure out how many. Does anybody know of any others that can do at least two line appearances? Thanks, Noah

Is there a way to get the OnHold music to restart without restarting asterisk? -- respectfully, Joseph - (606) 477-2355 x140 ------=============

Hi, I'm wondering if anyone has had any experience implementing Shared Line Appearances in asterisk 1.4? I am currently using SNOM phones with the metermaid patch, but I would like to see if the new functionality works better.. The examples in sla.conf don't really explain how its all supposed to work (ie trunks & stations etc..) I've looked everywhere for some decent