similar to: H323 - Gatekeeper - asterisk - SIP config problems

Hi, i'm trying to setup Asterisk to work with GnuGK using the Openh323 channel driver. I have a Gatekeeper that gets H.323 calls from a Cisco GW. To this Gatekeeper I've registered some endpoints, Cisco ATA186, Snom 100, etc. Now i want send the numbers 083xxx into Asterisk. Easy, i'll just enter something like this into oh323.conf: gwprefix=083 And all my calls starting with 083

Send these questions to Asterisk-Users mailing list. h323.conf ################################################## ; ; Configuration file of OpenH323 channel driver ; [general] listenAddress=W.X.Y.Z ; local ip listenPort=1720 tcpStart=10000 tcpEnd=20000 udpStart=10000 udpEnd=20000 fastStart=yes h245Tunnelling=yes h245inSetup=yes jitterMin=20 jitterMax=100 ipTos=none outboundMax=100

Hi, I am working on a H.323 project which involves GnuGk and Asterisk My current goal is to provide IVR functionality for the H.323 users which register through GnuGk(eg. call credit information) I have successfully built a H.323 platform using GnuGk - it uses SQL accounting and authorisation. Now I am trying to integrate it with Asterisk in order to provide IVR functionality as I already

hi, we are using a voip h323 switch. the switch sends all caals to our Gatekeeper (gnugk). gnugk musst send all calls to asterisk and asterisk must do his choice (sip endpoint or out to PSTN) Making calls to our h323 switch works fine over asterisk. what must i configure to get inboung h323 calls from our gnugk to asterisk? any hints for me? thx -- Thomas K?pper 01063 Telecom GmbH &

I have build asterisk from latest CVS HEAD-05/09/05 with H323 support as described in README file. Open H.323 version v1.17.1 and PWLib v1.9.0 on Mandrake Linux 10.2 kernel-2.6.11 I tested it with following phones: -- XLite (SIP softphone) -- QMix SIP IP phone (PA168F) -- SJPhone (H323 softphone) -- QMix H323 IP phone (PA168F) -- FireFly (IAX2 softphone) Everything works fine except a problem

I'm trying to configure Chan_H323 to register with GnuGK... without success... i've failed finding sample configurations. I'd greatly appreciate anyone who can provide sample config of H323.conf and gnugk.ini I am tyring to configure Asterisk as a neighbor in GnuGK. I'm always getting this error on Asterisk. ERROR[16384]: chan_h323.c:1987 load_module: Gatekeeper registration

I have some Grandstream BT101 SIP phones. Work great (so far). I have some "Planet VIP-101T" H323 phones... how do I make them look/feel/act like a SIP phone ???? I can dial to them from both Trunk + SIP's (ie - I've added 'oh323' libraries) What config do I add so that if I dial the * IP - they then at least act as an extension? Ideally I'd like to just pick up

Hello everybody, I have a strange comportment with oh323 and asterisk, I'start testing asterisk but with this I can't understant plesae help me ! Thanks Eltorio ---------------------------------------------------------- 1/PB: I can't dial from a H323 extensions (registered on a GNU GK) to a Modem[i4l] line ---------------------------------------------------------- Nothing happens

I've configured Asterisk 0.7.2 to work together with Cisco ATA186 (SIP,G.711. RFC2833) and OpenPhone (H.323, G.711). But there is an issue while calling from ATA186 to OpenPhone via Astrisk - when I press any key on analogue phone connected to ATA, Asterisk shows following message: -- Executing Dial("SIP/519-3781", "OH323/62.213.36.100|20|Tt") in new stack --

Greetings- As most of you who monitor this list know, I've been messing about with Asterisk -HEAD, Cisco Callmanager, and the nufone H323 channel driver here for some time- with pretty decent success. I'm hoping to cash in a chip here- I've run into something that is probably a very simple answer, yet not found a decent reference to resolve it. Scenario- -HEAD as of last week

Dear friends, I have compiled and installed h.323 in my asterisk. And I have a service from a H.323 VoIP provider who give me user, password and gatekeeper IP address. All configured. But when I start my asterisk i receive the following error and h.323 calls can not be making and/or receiving. [chan_h323.so]=> (The NuFone Network's Open H.323 Channel Driver) == Parsing

Hello everybody, First time installer and I need the lists advice. My plan is to use asterisk PBX with some hardware to terminate my calls coming from several operational gnugk gatekeepers. Do have RH9 and downloaded the latest asterisk from CVS. Compiled according instructions and is running fine. Could hardly find any info on h323 implementation untill the REAME in the channels directory.

hi IIRC, Jeremy once said that chan_h323 could be used as a gatekeeper but perhaps lacking a few features as compared to gnugk. Is this possible? I have some dlink DPH-100H phoes here for testing, but they require a gatekeeper, and if I can do it, I'd love to keep gnugk out of this. thanks roy

Hi, I use with asterisk gnugk a gatekeeper for h323 client. I don't understand why asterisk can't have the H323-ID (callerID). In the gatekeeper's monitor I have this H323-ID but not in asterisk. Does anyone know something about it, or how can I send a caller ID to asterisk ? Rattana -------------- next part -------------- An HTML attachment was scrubbed... URL:

I've some code to manipulate incoming Caller-ID - so its suitable for replying to... [sipdef] exten => s,1,NoOp(FWD SIP: "${CALLERIDNAME}" <${CALLERIDNUM}>) ; Alter incoming calles from pulver - add a '87' exten => s,2,Gotoif($[${CALLERIDNAME} = ${CALLERIDNUM}]?3:4) exten => s,3,SetCIDName(87${CALLERIDNUM}) exten => s,4,SetCIDNum(87${CALLERIDNUM}) exten

Ok I'm confusEd at this point. I have Asterisk installed with the h323 channel driver compiled and installed. I also installed gnugk. Is it needed? When I use it as a gatekeeper I'm seeing no interaction with asterisk. If I dial straight to asterisk with netmeeting I get the default extension and I can see asterisk trying to play the "congrats-demo" file but I hear

Hi all, I have the following setup: UAs ------------SER ------------------------ ASTERISK ---------------------GNUGK --------------- GWs SER is configured to route call requests from UAs to Asterisk. Asterisk is configured to receive the call on SIP channel and dial out to GNUGK over H323 channel. The problem I'm facing is that asterisk sends out the call request to GNUGK and times out

Dear All, It seems that there is a bug on the ooh323 while using registering with gatekeeper. The gatekeeper is GnuGK and the problem is when the Asterisk recieves a call from the Gatekeeper and routes it back out to an SIP Phone. The call would be connected and immediately dropped after 1-2 seconds connection time. This doesn't happen when ooh323 module isn't registered to a

Hi, I have an ansterisk and a cisco 827-4v registered to a Gatekeeper. asterisk has two extensions: exten => 223,1,Dial,OH323/BYEXTENSION@827PD exten => 730,1,Dial(IAX/eduardo@10.0.11.103) (IAX are working well) When I try to call each other, gnugk shows a ARJ: ARJ|10.0.11.112:1720|223:dialedDigits|730:dialedDigits|false|resourceUnavailable I think this could be a codec

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi there, i have a working Microsoft ISA firewall with buildin H.323 Gatekeeper.... So Far, i got registerd the asterisk on the M$ Gatekeeper... here is the h.323 configuration: ; Open H.323 driver configuration ; [general] port = 1720 bindaddr = 0.0.0.0 allow=all ; turns on all installed codecs dtmfmode=rfc2833 gatekeeper =