similar to: Cisco CP-7905 phones

Hey list (again - annoying bastard I am) I've played with Firefly/* for a while and I have yet to find a way to have * send voicemail notification to Firefly. It appears possible using SIP (no clue whether Firefly supports it) in the sip.conf file, but there's no mention of anything voicemail-related in the IAX.conf file. I'm using IAX with Firefly, so that might just be the

This might have been talked about before, but I'm posting anyhow. I've got down to testing Asterisk yesterday, and I couldn't help but compare it with Skype (a Windoze only product, yet, but extremely efficient for some reason). Skype has almost unperceptible delay (LAN), while there is almost half a second of delay regardless of the codec on Asterisk. An even if we were to

Hey, Can anyone comment on the difference between the 7905 and it's upgrade, the 7905-G ? Has anyone used these phones in a configuration? Is SIP well implemented in the 7905 ? Thanks in advance, Mat

Good day, I've got around to installing an X100P card in my computer to try out asterisk. I noticed (and people who were testing with me also noticed) that when dialing from my SIP soft phone to the PSTN, the ringer tone changes after 2-3 seconds, precisely when the Zap channel takes over the call. Is it possible to eliminate the first ringing? Is there a reason to this

Good day, I just tried building Samba 3.0.1 on a generic Solaris8 x86 box with ACL support as the only configure option and the build fails quite early. Has anyone experienced a similar problem? This is a very vanilla build, using gcc 3.0. ************************************* server# make Using FLAGS = -O -Iinclude -I/opt/src/samba-3.0.1/source/include

Hello folks, I'm having the following problem when compiling vanilla Samba 3.0.1 on a Solaris 8 X86 system: creating /opt/src/samba-3.0.2pre1/source/utils/net_proto.h Compiling dynconfig.c In file included from nsswitch/winbind_nss_solaris.h:28, from nsswitch/winbind_nss.h:34, from nsswitch/winbind_nss_config.h:79, from

Good day, I'm running some tests with Samba 3.0.1pre3 with an LDAP sam. LDAP has been, to the best of my abilities, properly populated with the needed group mappings. The "net groupmap list" command indeed shows the following: [root@box bin]# ./net groupmap list Domain Admins (S-1-5-21-2009448231-1530593524-1969381020-512) -> domadm Domain Users

I had a worker scheduled to run every minute with backgroundrb_schedules.yml: ebay_runner: :class: :ebay_auction_worker :job_key: :ebay_auction_runner :trigger_type: :cron_trigger :trigger_args: 0 * * * * * * This worker posts an auction to eBay from a queue of auctions every minute. I was having a problem where the worker would run ok the first time, but never any subsequent minutes

I've got asterisk working great with cisco 7905 sip phones. I've just got one issue that I can't figure out. I have a 5300 connected to the PSTN via PRI. When I send a call from the 5300 to asterisk it will ring the 7905 phone for 4 seconds then drop. This is because the only message asterisk sends to the cisco is the 100 trying message. The 5300 receives that and sends a call

I'm deploying a fairly large number of Cisco 7905 with SIP connected to an asterisk PBX. The problem: the 7905 has this nice "feature": You can set a "voice mail number" in configuration, so that you can listen your voice mail just by hitting the "messages" key on the phone. It just autodials "8500" or whatever else. The customer wants this, so

Hi, I'm using a Cisco 7905 (with SIP image CP7905010300SIP050414A) on Asterisk 1.07. Whenever the user gets voicemail, the MWI goes on, and when the user listens to the voicemail, the MWI goes off. However, the phone is configured (as in the default config by Cisco) to re-read its configuration from tftp every hour. This 'warm reboot' also turns off the MWI, and it won't

How to disable silence suppression (or Voice activity detection - VAD) on Cisco 7905 phone? On Cisco 7940 I use "enable_vad: 0", but I can't find anything similar for 7905. -- Tomislav Parcina tparcina#lama.hr

Can anyone tell me the features of the Cisco 7905 with SIP? I mean things like number of lines, speakerphone, transfer buttons, etc. I've seen the Cisco material, but all it told me was how nifty it is and how wonderful the XML interface will be ;) Thanks, --Ernest

Speaking of USB devices (recent thread on wireless USB), I need at least 4 USB ethernet dongles, cheap. So on EBay I found: http://cgi.ebay.com/NEW-10-100-USB-to-Ethernet-Network-LAN-Adapter-NIC-RJ45_W0QQitemZ230262173544QQihZ013QQcategoryZ11182QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Hi everyone, I'm trying to update time on all Cisco 7905 phones in my company.. is there some way to do it from asterisk? Thanks, Tomislav -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060328/ea0c7e02/attachment.htm

I have 15 ea Cisco 7905 phones. I have them working with my Asterisk system, but I cannot get the blind transfer button on the phone to work. I can use the transfer button to work, but I don't know how to release the call after I transfer it. When I try and blind transfer, it just hangs up the phone. * and # do not work on my Cisco phones, so I can't use Asterisk's built in

Anyone have the example.txt file that Cisco's documentation on the 7905 IP phone keeps referring to? Or can someone possibly share a fairly complete example config file for these phones with me? Thanks! -Daniel

How to configure cisco 7905 with asterisk ,if you please can send me step by step configuration steps . Thanks Regards Khaled Chehab System Integration Engineer Xplorium Offshore. Sakiet Al Janzir Postal Code: 1102-2080 Tel: (961) 1- 868 686 Fax :(961) 1-808 810 GSM: (961) 3-979 343 ********************************************* No employee or agent is authorized to conclude

So I won one of these on ebay, in the auction it says it has the RJ45 ports on it but it doesn't :( If I were to get an analog adapter would I be able to use the video portion of this or am I SOL? The auction requires me to pay for shipping back, so I end up losing money unless I sell it on my own. Or has anyone hacked these to work on enet?

Good morning and Happy New Year 2003! Let it be prosperous for both you and me! Below you see a very short version of my CV as of January 2003 for your kind consideration and update. Word, TXT, and PDF version of the complete CV are available upon request. Enjoy the economic recovery! Make it a great day: ZAR ================================================================= ZAR PETKOV,