similar to: Asterisk and Iconnecthere pause

I am going to have to find a fix for this problem or I'm going to have to quit using iconnect. About one call in 10 or so, iconnect's gateway gives me an error (console output appended below). So upon receiving the error, which as a 4XX error means, "Fatal," asterisk gives up and drops the call. But not iconnect!! The phone at the other end starts ringing, and rings

Hi all, This is my first post here - I started with Asterisk a few days ago and have "fallen in love" - fantastic product. I've only got softphones connected at the moment - I'll probably order the FXO/FXS cards in about a month (and then think about getting some hardware SIP phones). Our current phone system is quite a few years old and isn't growing with us (when a single

Hi, I have a deltathree account and I can place calls but I can't receive calls. I use Grandstram sip phones. When I call my deltathree phone # the voicemail is answer :(( I need some help and solutions from the guys who allready are using deltathree. I search on Internet and I try all types of configurations... :( This is my configurations files: - sip.conf - [general] port = 5060

This may be slight off topic, but perhaps it has relevance: My iconnecthere account no longer works for "inbound" calls through NAT using the standard configuration that they provide on their website. I have sent them a message, but I believe it will be flushed down the toilet by the first-tier support people. When I call my iconnect number, it goes directly to voicemail. There

Hi All, I am trying to use iconnecthere to make outbound calls. I am behind a linksys router. I keep getting this error 481 "Call Leg/Transaction Does Not Exist". Does anyone have any prior experience with this problem. Any leads will be much appreciated. Attached are the conf files and logs #SIP.CONF ; SIP Configuration for Asterisk [general] port = 5060 ; Port

Symptoms: when calling my iconnect phone number (13033913323 in my bogus example below) from my cell phone, I can see that the call makes it to my asterisk server, and my phones even ring once as * passes the call through during the "180 Ringing" period. However, it seems that iconnecthere.com cannot see my "100 Trying" and "180 Ringing" messages, as they

Hi! I am new to Asterisk too, I got the similar problem and I would like to know how to get * to work behind NAT. When I have the SIP Debug turn on, I got the error 479 from FWD when * try to register with FWD, it looks like * is using the local IP (192.168.x.x) in the Contact field. I have put the nat=yes in the [FWD.Pulver.com] content, but it does not seems to make Asterisk aware the

Hi All, I can only seem to get iconnecthere working with incoming calls intermittently. One minute it seems to work, and the next it doesn't. I am not aware of anything being changed in the config files. Outgoing calls work ok all the time. The Asterisk box is behind NAT so that does complicate things slightly. However, the Iconnecthere PCPhone client software works perfectly for

Hi, I wish to connect several ATA186 Phones to each other, to iconnecthere and to the PSTN using asterisk. Please tell the appropriate settings for firewall (ports to open etc.) sip.conf and extensions.conf(part relevant to iconnect). Also I would be glad to get a working example of your ATA186 configuration. I tried searching the mailing lists and several sites but did not find an answer.

Hi, I am calling from a grandstream phone with g723 codec through * to iconnect. Incoming context as well as outgoing context set to g723.1 codec in *. Call get connected and I can talk. However I get the following warning, which scrolls on my screen until I hang-up. [root@asterisk sath]# cat g723.1 - Executing SetCallerID("SIP/-08122ae0", "1001") in new stack --

Hi all, I'm working on a setup for a small office. I'd like to use SIP/iconnecthere most of the time, because they're cheap. But they only allow a single call. When the single iconnecthere line is in use, I'd like to use IAX2/voicepulse instead: exten => _1NXXNXXXXXX,1,Dial,SIP/BYEXTENSION@iconnect exten => _1NXXNXXXXXX,2,Dial,IAX2/npI42VoD38@voicepulse/${EXTEN} Well,

Has anybody out there tried to use two different iconnecthere accounts with Asterisk? What I want to do is use a second account if the first is busy. I have tried the following: exten=>_91NXXNXXXXXX,1,StripMSD,1 exten=>_1NXXNXXXXXX,2,Dial,SIP/BYEXTENSION@iconnect ;iconnect is the first account exten=>_1NXXNXXXXXX,3,Dial,SIP/BYEXTENSION@iconnect2 ;iconnect2 is the second account But that

For the past several days I can no longer use iconnecthere with asterisk. It is broken in BOTH directions; I can neither make nor receive calls. On outbound calls I get an immediate error: -- Got SIP response 400 "Bad or Missing To" back from 213.137.73.140 On incoming calls, the call switches through OK, and for a few seconds I get audio in both directions, although much

Just wondering whether we have a resolution to iconnect incoming problem, which started few days ago. Cheers SW -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20040808/ecc99c4a/attachment.htm

Hello all, I have a 7960 registered to asterisk. I am trying to use iconnect as my sip provider. When I send an invite to delta-three, I get the normal INVITE - 407 - INVITE exchange. The problem is, asterisk is sending the second invite using the 'dialed number' from the 7960 as the username, and not my 'username' configured in sip.conf. I believe that digest authentication

hi i got iconnect to work, works pretty well now except calls sometimes (more often than not) hang up after a couple of minutes.. heres a bit of the debuging Record-Route: <sip:61892142222@213.137.73.178:5060;maddr=213.137.73.176> From: sip:61892142222@natrelay.deltathree.com;tag=3281050172-73809 To: "JUSTIN XLITE" <sip:2001@61.95.68.84>;tag=as09766a78 Call-ID:

I can't talk through iConnectHere. The connection gets made but as soon as any sound is transmitted the call ends and the Asterisk console shows an "Unsupported Media" error as follow: Got SIP response 415 "Unsupported Media" back from 213.137.73.147 My only allowed codecs are alaw and ulaw. My sip.conf looks like: [iconnect] type=friend secret=xxxx username=yyyyyyy

When I place a call using Iconnecthere as my sip provider, I hear no ringback when making a call. Does anyone else have this problem or offer any suggestions? Thanks, Kevin -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20031003/b048f72f/attachment.htm

Is there a service like iconnect that does allow dialing out more then one concurrent connection? Asterisk works great with iConnectHere, but they only allow one call at a time. I don't want to setup an account for each concurrent call, because it will make iConnect an expensive service, and besides, all of our calls combined doesn't reach 1000 minutes per month. Any ideas?

I have an IconnectHere account with a Inbound number and have setup the sip.conf to register and am recieving the call but When I answer the call it disconnect. I have tried sending the call to from * to a Softphone, Pingtel, and FXS port and all result the same. As soon as I accept the call it disconnects. I believe it may be some type of codec issue but I am not very familiar with that layer.