similar to: Fw: Interconnecting to an Altigen PBX?

I would like to integrate * with an existing Altigen PBX. I want to spend as little money as possible to make it happen. My main goal is to inexpensively connect a branch office to the phone system. Eventually I would like to replace the Altigen system with an Asterisk server so I don't want to spend any money on Altigen hardware. Currently the Altigen has analog interfaces with a couple

Hi Everyone. I have a client that uses an Altigen system. I am really new to PBX systems so all this is totally foreign to me. They currently have 5 inbound trunk lines and about 20 analog phones. >From what I can gather they are using the Altigen Quantum cards that support 8 extensions and 4 trunks. >From what I can gather the solution is a TDM04B and TDM01B to bring in the lines from

I am attempting to establish SIP peering between Asterisk and an AltiGen soft PBX. This is my first experience with SIP peering. I can successfully make both inbound and outbound calls to/from a softphone on the AltiGen system (network access is provided by a PRI on the Asterisk system), but they are disconnected unexpectedly. The attachment is a redirect of the Asterisk CLI during a call that

Greetings All- I have an * box with the NuFone H.323 channel driver installed. I also have an Altigen VoIP system with a PRI to the PSTN. I can sucessfully make a call from a SIP extension (snom190) to an H.323 extension (altigen phone) The thing I can't seem to make work is a call from a H.323 phone to a SIP extension. Here's the layout:

I'm attempting to do a first-time Asterisk install at home, firstly for use by my self and my family, and secondly as a learning experience. I've got a new house, and the previous owners removed all but one (1) phone jack. So I figured I might as well build a PBX. Functional goals include station-to-station calling, rudimentary auto attendant/voice mail, and perhaps tieing into the

Hello Everyone, My company is about to deploy * as replacement for our existing commercial Altigen PBX. Meanwhile, I've been trying to find the best cost effective SIP VoIP phone which we can use in office for 20-30 employees, as well as a few remote staff. Normally I wouldn't post about a VoIP phone, however, this phone was released less than a week so I thought I'd give some

Hi all, There is someone with some experience interconnecting a Panasonic digital PBX (KX-TD1232) with Asterisk? Thank you and best regards, Dan

Hi guys, I need to interconnect an asterisk server (1.4.17) with an alcatel pbx, because i want that an asterisk extension can call an alcatel extension and viceversa. I need to do this throug a NT port (of the digium card) for technical reasons (linked with alcatel hardware). Card installation was fine, but i'm not sure of the configuration i choose. In /etc/misdn-init.conf i put my

Hello folks. We are trying to interconnect an asterisk installation with a gnugk 2.0.5 installation to become able to use some H323 hardware that needs a gatekeeper (particulary an Ericsson WebSwitch 100). We have managed asterisk to dial H323 endpoints successfully (although calls are interrupted immediately after connection with "spawn extension exited non-zero"), but we could not

ok guys I have a PHP GUI that will be great for both of you. direct editor to the whole file intact OR click to go to an extension. I will post a link to it tomorrow morning... as soon as I can get it off my production server HEHE.... it can do CRC checks on the *.cnf files and it will allow you to edit and parse out for you all your config entries with complex cnf files and default sample

I've tried timing faxes two ways:

Hi List, I have another issue on allowing outgoing calls to PSTN on Asterisk via Avaya Phones, I hope that anyone could help me fix this issue: *When I dial through Avaya phone i just here a "good bye message" reply from asterisk server. And here is the log:* == Starting OOH323/(null)-b7db8aa0 at internal,s,1 failed so falling back to exten 's' == Starting

hi .. i require to interface asterisk to a 60 line analog PBX in a hotel. I was thinking of giving Asterisk a couple of PBX lines interfaced through cards, and then place outgoing calls through SIP/H323 and a DSL connection. analog extension lines <--> analog pbx <-->asterisk <--> SIP --> termination I do not need incoming calls to the lines. My question is this : if I

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo

Good morning, folks. I'm involved in a project to enforce NFSv4 ACL's across a variety of storage platforms, in particular NetApps sharing NFS. That works fiine with the NetApp NFS qtrees, but we'd like to share those with CIFS clients as well. This works, and restricts access the way we expect NFSv4 ACL's to work, but the Windows clients cannot view any of the security settings

Good day everyone. I have Cisco 1760 routers that do site to site voip. Each router has 2 fxs ports that connect to the local pbx and use sip to connect to other routers over the WAN. I am thinking of putting in an asterisk box at the hub site for interconnectivity with our global office voip provider. This provider runs asterisk. Question is - can Cisco 1760 routers make/receive calls to/fro

Hello, I have been retained by a Building Management Company to install a combined Voice/Data solution for a Tennated Office Space. This space will rent offices, with telephone and internet service to inviduals or small groups of individuals. As fate would have it, the service will be provided in a building where we have a major Pop, with a DS-3 worth of ISDN PRI circuits, 345 megs of

I estimate two competing simple regression models, A and B where the LHS is the same in both cases but the predictor is different ( I handle the intercept issue based on other postings I have seen ). I estimate the two models on a weekly basis over 24 weeks. So, I end up with 24 RSquaredAs and 24 RsquaredBs, so essentally 2 time series of Rsquareds. This doesn't have to be necessarily thought

Hi, I'm trying to connect * to Nortel BCM 50, This PBX use H.323 v3 to interface with other PBX. The port use to connect is TCP 1720 but I can't configure this port on my * box. I'm using a H.323.conf file sample to activate the port but the * isn't listening there. Somebody have any idea or tip? This is mi H.323.conf [general] port = 1720 bindaddr =

Hi I'm new in this field, have been reading a lot, and have a little question. could it be possible to connect an Avaya IP office pbx to asterisk using a E1/T1/Pri? Original instalation: Telefone company|Pri--->Pri|IP Pffice My Question: Telefone company|Pri --->TDM|Asterisk|TDM --->Pri|IP Office I know that it can be done by using h323, but I need a card on the IPOffice my