similar to: Cisco Call Manager 3.2 and Asterisk..

Some of you may remember back in May the thread on using Asterisk as a voicemail server for a Cisco Callmanager system. My own Callmanager system is integrated into an Asterisk server for voicemail (and other things). Back in May I was using H323 for integration, but since I've upgraded to CCM 4.1 I have switched over to SIP. The integration with H323 required using Call forwarding to send

Hello, I have Cisco CallManager 3.3.4 and Asterisk@Home latest version. I have earlier tried getting Asterisk to register with CCM via H323 and failed. Back then, I learned that this is a known bug in Asterisk. Also people who tried doing that had also succeeded in getting calls to go through only one direction like from CCM to Asterisk. I am not that expert so excuse my ignorance with this

I need to pick all the Asterisk and Cisco People a little. My company has a Cisco Call Manager 3.3, configured via h323 gateways. I have remote users that I want to place a SIP Server on the external WAN and be able to connect their phones to the system and be able to get calls and call people in the office going through the Cisco Call Manager and the h323 router. My only problem is that Cisco

On Wed, 23 Jul 2003, Yifang Dai wrote: > I wish! My company just spend a lot $$ on the shinny CCM phone system, so I > don't think I can change that easily... But if I can get asterisk to > talk to CCM via h323, and prove it's usefulness, I might have a chance > to use * in the branches... Well, good luck, then! > By the way, do you know if we can get *'s VM to

Hi, This is probably outside what Asterisk is intended for, but I'm hoping it can help. I need to make and receive calls through a Cisco Call Manager server that I have no control over. I have to use a Cisco soft phone (Cisco IP Communicator), which only runs on Windows. But I'm on Linux. CCM is apparently capable of supporting SIP and H.323 interfaces, but they won't provide

Hi All, I am new to Asterisk and VOIP. I managed to get it working with sip(X- Pro) and skinny(Cisco 7940,7960). I have a call manager to which all the phones are connected. I would like some assistance integrating CCM with Asterisk. I was trying to understand the H323.conf file, but got nothing in it. Any steps, any config, any help would be highly appreciated. Thanks & Regards, Gurdeep

Does asterisk work with CCM as gateway ? When I trying call asterisk,I totally can't hear any sound. When call ohphone - works good. 10.0.1.219 is CCM, 10.0.1.207 asterisk. Trace messages here : -------------------- == New H.323 Connection created. -- Received SETUP message... == Setting up Call -- Calling party name: [5001,] -- Calling party number: [5001] -- Called party

Has anybody successfully (or I guess unsuccessfully for that matter) implemented Cisco Call Manager and used an * box for voicemail? I checked the wiki and google and I see some references to Call Manager Express and *, but CME is completely different than CM. If anybody has done this or has any insight, it would be appeciated. We are trying to migrate ~ 300 users off of Cisco Unity and

Hi I have found in http://lists.digium.com/pipermail/asterisk-users/2004-July/056111.html (Hack to make * -> (H323) -> CCM -> IOS GW work) that i need a special version of chan_h323, because of the External RTP problem. Do you know exactly which version is it? Or do i need an unofficial patch? Thanx Andr?s

hi is it possible to set up in the dialplan (on in sip.conf, or something else) the hostname of the outgoing uri call? This is my scenario: - CCM integrated with Asterisk via h323 - SIP user registerd to Asterisk - Asterisk is behind NAT - Asterisk ip is 10.10.10.2 - SIP user view Asterisk as 10.10.15.2 (Asterisk is behind NAT) When the CCM calls the SIP user the call works perfectly. The

Hello, I can use directed call pickup using pickup application (between sip, iax, skinny cals), but unable to pickup call that is ringing on phone behind h323 gateway (using original h323 channel in asterisk), is this even suported? thx PJ exten => _*7.,1,Pickup(${EXTEN:2}) console log, when trying o pickup ringing line 324 (h323), from skinny phone (953) -- Executing

I've got problem with connecting asterisk to CCM. Our side has Asterisk system other side CCM , ehrn i dial a number on other side channles created , connections established but nothing happend , just silence , and after some time busy tone. Sides sending ad reciving g711 codec , but we need that sides send and recive g729 (we have licenses) , if in h323 conf i try to : disallow=all ,

Hi All, I haven't started sip traces or debug yet, but was wondering what the deal is with the CCM and reinvite, why it doesn't work with Asterisk (using 1.2.9.1). I can make calls back and forth all day with canreinvite=no, when I try to reinvite an inbound sip call from the CCM with Asterisk server 1 to Asterisk Server 2, I get one-way audio issues. All the RTP ports are configured

The hack below is for OpenH323, not Asterisk. This is not an Asterisk problem AFAICT. I am posting it here so that any other Asterisk user with a similar problem might benefit from it. I may or may not post it to an OpenH323 list, but since both variants of the H.323 channel in Asterisk use non-current OpenH323 versions, it may not be of any benefit to anyone anytime soon if I went that route!

Hi to all in a scenario where: - the bandwith is shared with other traffic (HTTP,VPN,ecc) - the PBX is on a remote VPN peer - due to many reasons Qos is not usable There is a IAX trunk between 2 Asterisk 1.4 i've tried different codecs (ulaw,alaw,gsm) but the main problem still remain the same: too many voice packet get lost. The main problem is surely on the network, but the strange thing

Hi, i'm searching and trying, but can't get it working. I'm trying to send calls from Cisco Callmanager to Asterisk with oh323 channel driver. Therefor the asterisk is defined as a H323 Gateway in the Cisco Callmanager. The Call comes from CCM to Asterisk and it works but i didn't get the called number. This is needed because i want to make Voicemailboxes. If i connect via

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

I would like to setup Asterisk for voicemail with CallManager 3.3(5). I would like to know what would be the best Distro of Linux to use and version, what version of Asterisk works best to interact with CallManager, and what H323 ChannelType works. As you probably read in another thread I tried FC5 with Asterisk 1.4 and OOH323 (included with the addons package). This doesn't seem to work to

It can be done. 1. Setup a new Vm profile on CCM with a mask of XXXX 2. Setup a CTI route point: a. Set the directory number to a pattern. I use *27XX but any pattern that you can send from * is good, ie. 88XXX b. Set the VM profile to the newly created profile c. Set the line to forward all calls to VM 3. Change the dialplan in * to append the extension called to the

Hi, I've got a CCM ( Cisco Call Manager ), with a Cisco Unity VM server and about 45 SCCP phones on the ccm, and 200 users on unity. we want to migrate all users to IP Phones to ditch our ancient phone system. I would love to get Linksys-Sipura SPA-941s for the 150 users not on IP phones yet and run sip to an asterisk server, but have their voicemail on Unity. these phones are $150 each,