similar to: CentOS 4.0 compatible with Dell's OpenManage?

Dear gurus, Three DELL SC430s were purchased by my company a few months back and I've been told that when they spoke with the DELL representatives, they were informed that these servers were fully RHEL 4.0 compatible. Specs of the servers:- - Pentium 4 - 2.8 GHz - 1 GB RAM - 2x 250GB SATA HDDs I tried installing CentOS 4.0 on it but it doesn't seem to be able to detect any hard

I have a Dell 1950 box on evaluation with 2 SATA drives connected to the on board Dell PERC 5/i with the disks set up as a mirror I've installed CentOS4.4 (x86_64) on the system and now I'm trying to install/configure/use the Dell OpenManage tools that came on a CD with the system. I've installed the tools using the provided install script and they appeared to install OK.

Has someone created a how to or a tutorial for installing/configuring DELL openmanage on centos ? --

Hi all, I'm just trying to get Dell openmanage to run on my Centos 5.6 box. The monitoring stuff appears to have installed but the web server stuff is complaining it needs openwsman 2.2.3 or later and I can only find that for RHEL/Centos 6, not 5. Can anyone point me at a suitable rpm, or do I have to resort to compiling it? Surely I'm not the only one trying to do this. -- Kevin

Hi Everyone, I have a Xen host (Xen 3.4.2) which is running CentOS 5.5 Dom0. I wish to install Dell OpenManage to get a nice web interface with hardware status. Do I need to do anything special to get this working on a Xen host? Or does it work out of the box? The reason why I''m asking, instead of trying, is that my server is currently on its way to a colo, and I won''t have

Hello, I just tried out XCP and I was surprised to see it looks pretty much like Xen from Citrix. Based on the RPM packages installed, I assume XCP is based on RHEL5. With that in mind, I have a few questions that I did not find an answer on the web... Perhaps I didn''t look in the right places, so if you know about any good documentations that I should read please share it :)

Hello We have Dell servers and need to monitor them through SNMP. but need to install or insert Dell MIBs to our Centos. is copying MIBs are enough ? has any one is using Dell OpenManage on Centos ? Thanks

Dear ML We upgraded a Dell Poweredge PE 1950 Server the 8th of May. Since then the server rebooted 3 times without external cause (it is located in a server farm with redundant power supply etc.). Looking at the servers monitoring infrastructure with Dell's own OpenManage tools, I get strange errors: [root at servernew ~]# omreport system esmlog (....) Severity : Critical Date

Hi all, I have a server which is really difficult to restart because of usage requirements and the fact that it's in a co-lo rack so miles away. I've added a couple of drives which I'd like to bring up and add to LVM but the config I know is in the PERC BIOS and requires a reboot. Can the config be changed in the openmanage suite and if so can someone point me in the right

On Tue, Dec 29, 2015 at 5:23 PM, Joseph L. Casale <jcasale at activenetwerx.com > wrote: > Instead of converting the sysv script, you could trivially write your own, > the following > was tested against about 6 SNMP queries, the service stops and starts as > expected. > That's certainly an option. One that I was prepared to resort to. But curiosity has the best of me ...

Hi, Has anyone used this with CentOS 4 recently ? If so is it still a case of needing to munge /etc/redhat-release and then everything works ?

I have a perc5i (and perc5e) raid controller in my poweredge 2970 running centos 5.5. The RAID controller config is set for write-back policy, which I can confirm by checking in OpenManage. I also called Dell and ran their reporting application and had them double check to make sure everything looks OK hardware wise and they confirm that it does Yet when CentOS boots is appears to use the

Hello CentOS List, I have a server that has SysV script supplied by a hardware manufacturer, which is not functioning properly. From my reading, systemd-sysv-generator should handle them (like it did for Dell OpenManage software which supplied SysV init scripts). /usr/lib/systemd/system-generators/systemd-sysv-generator Takes no or 3 arguments (it tells me), but I didn't find clear

Consolidating my reply to both James and Gordon in one message. On Wed, Dec 30, 2015 at 2:38 AM, James Hogarth <james.hogarth at gmail.com> wrote: > On 30 Dec 2015 00:55, "Mike - st257" <silvertip257 at gmail.com> wrote: > > > > On Tue, Dec 29, 2015 at 5:23 PM, Joseph L. Casale < > jcasale at activenetwerx.com > > > wrote: > > > >

Hi All, I'm having some problems getting postfix to relay mail. I'd appreciate any tips. Perhaps there are some settings which I may have missed, somewhere. The postfix mail server is on VLAN 250 (192.168.250.0) whilst I have several other users on other VLANs (e.g. 91, 92, 93, etc... 192.168.91.0, 192.168.92.0, 192.168.93.0, etc...). So, if I had a PC sitting on VLAN 91 with IP

I'm a fairly experienced RH and Fedora user and admin looking to try CentOS for the first time. I have lots of experience with Dell servers and I'd like to stick with them. Although I'm sure it's not always strictly enforced, Dell claims that it won't provide warranty hardware support on servers installed with an un-Dell-supported OS (basically, anything other Windows, RH, and

Hpa, Dell ships a CD called Dell OpenManage Server Assistant that, starting with version 8.0 released last November, is a Linux-based bootable CD. It uses ISOLINUX to load a linux kernel/initrd combo to start the system. From version 8.0 to 8.2 we use isolinux version 1.66. Starting with version 8.3 we have upgraded to version 2.08. First of all, I'd like to say thanks for your excellent

Hi, I am looking into purchasing a new server. This server will be mission-critical. I have read and somewhat understood the theories behind RAIDs 0, 1, 5, 10 & JBOD. However, I would like to get some feedback from those who have experience in implementing and recovering from a HDD failure using RAID. Hardware specs include:- Dual Xeon 3.2 GHz 2 GB RAM I would like to implement

I need to install Centos on a machine with 3tb raid disk. (3 ware raid card) Could someone in the list suggest a utility for partition this disk. I would like to have the whole disk in 1 partition and format it for ext3. The default partitioning utility doesn't do this. The OS sits on another SATA disk and each time during the installation it doesn't format the full disk which is 3TB.

Hi Josh, I found id3v2 didn't work on v1.1.0. I checked source codes, macros- (in such cases as FLAC_HAVE_ID3LIB) ware moved to config.h. That is good. But the place to do include is the after of #ifdef FLAC_HAVE_ID3LIB. The result of configure script isn't reflected. And it doesn't always have id3lib with this. Move place of 'include "config.h"' to the top. I